John Teresi

Hello.......thank you all so very much for the kind comments......I really do appreciate them.......The Rolling Chassis is finished ......I attached the two Shut Off Cables......and the Throttle Cable......and Fire Bottle Cable......I used "Pro Tech" Spark Plug Wire and nut and bolt ends.........I also got all the Plumbing attached I used "Pro Tech" Braided Line and RB Motion AN Fittings........Art Laski gave me some decals for my Double Oil Filter set-up......thanks Art........I also attached the Breather Tubes and used Model Car Garage Radiator Hose Clamps.......make sure to get your "Pro Tech" parts from Laski Specialties here: http://www.laskiscale.com thanks for looking

And a few more ........thanks

Few more WIP pics........

Hello......thank you all so very much for the kind comments.......I really do appreciate them.......I got the Engine and Drive Shaft attached........I also attached the Frame Tins and painted them "Osh" Brand Flat Black and added some "Pro Tech" Dzus Fasteners........I also sanded off the molded seat and painted it Alclad ......I added a "Pro Tech" 5 Point Harness and added some Slixx decals and lightly weathered.........I added a Chris Sobak Designs Mallory Box with "Pro Tech" detailing wire.......I also modified and Painted Alclad a Gas Pedal .......I also attached a Top Studio Toggle Switch.........don`t forget to get your "Pro Tech" products at: http://www.laskiscale.com......thanks for looking

Dave.......Man,that is soooooooo CRAZY good........I love your work

And a few more.......thanks.

Few more WIP pics........

Hello.......thank you all so very much for the kind comments......I really do appreciate them........I got a little more done on the engine......I attached the Paul Rowe Trans......I used some RB Motion Rod Ends and "Pro Tech" nut and Bolt Ends.......I also attached the "Pro Tech" Braided" Fuel Lines and the RB Motion AN Fittings to the Fuel Blocks and Barrel Valve.......I attached The Chris Soback Designs Blower Belt to the Chris Sobak Designs Pulleys........I attached the Chis Sobak Desings Fuel Pump and added some 'Pro Tech" Nut and Bolt Ends.......I attached the Chris Sobak Designs Barrel Valve and Levers and added a few details and some "Pro Tech" Nut and Bolt Ends.......I made a Double Oil Filter set up and got that attached........you can get your all your "Pro Tech" goodies from: http://www.laskiscale.com thanks for looking

And a few more ......Thanks.

Few more WIP pics.......

Hello......Chris thanks Buddy.......I got most of the engine done........I will mention all the parts that I used from Chris Sobak Designs when I`m finished with the Engine........I used quite a bit of Chris`s Designs that were 3D printed from Shapeways........I airbrushed the Valve Covers ,Idler Pulley Brkt. and Blower Chrome Alclad,then I misted Alclad Pale Gold over the Chrome Alcald to gice a different kind of look........I used some "Pro Tech" Spark Plug Wires that Chris Sobak gave me......thanks Chris .......I gave a light wash to the engine using "Folk Art" Black and Light Gray ........I added some decals to the plug wires and a Slixx Decal to the Oil Pan......Chris also gave me a decal to use on the Distributor.......thanks Chris.......I made some Fuel Lines and attached them to Chris Sobak Designs Fuel Blocks.......I added "Pro Tech" and Meng nut and bolt ends to the engine.......thanks for looking

Mark ......Amazing what you do.......WOW!!!!!!

And a few more.......thanks

Few more WIP pics.......

Hello......thank you all so very much for the kind comments.......I really do appreciate them.......I made some Fire Bottles with a "ON" mechanism......I painted them Tamiya Red......and used Slixx Decals.......I started on the engine painted Alclad and weathered......... I used a Sobak Desingns Engine Pulley ,"Pro Tech" Braided line and nut and bolt ends....and RB Motion A N Fittings painted with Tamiya Clear Red and Blue........I made a Oil Gauge and used a Slixx Decal.....thanks for looking

Vince......very cool man

Seth......turned out great.......how ya doing on the Mc ewen Chevy F/C?

Mark......WOW man......Amazing work

Vince.......nice collection you got there .......they look Great!!!!

Vince.......Really dig this one!!!!!!!

Vince......looks Great!!!!

Vince .......nice work!!!

Dave.....man,that is the most realistic work I have ever seen.......un-real

Mark.....Fantastic stuff......your jig for the belt is very cool.......and your weathering too

And a few more.......thanks.