Jump to content
Model Cars Magazine Forum

John Teresi

Members
  • Posts

    6,042
  • Joined

  • Last visited

Everything posted by John Teresi

  1. and a few more.......thanks.
  2. few more pics.....
  3. Hello......this is the finished Carl Casper`s: "Phonebooth"........you can see how I built this model here......thaks for looking......
  4. Hello......thank you all so very much for the kind comments......I really do appreciate them......I got the taillight attached and the radiator was modified attached and painted Alclad......I airbrushed the headlight lenses red like the 1:1 Phonebooth.......and I attached the radiator hoses......I am calling this finished......I will have finished pictures in the "Under Glass" section today.......thanks for following along and the kind comments you can go heere to the "Under Glass " section to see finished pictures......thanks http://www.modelcarsmag.com/forums/topic/116691-carl-caspers-phonebooth-finished-pictures/
  5. Yes,surface should be smooth and shinny like glass.......smoother and shinnier the better
  6. Hi Richard......I strip the chrome.......I sand off all pin marks......I primer with Orchard "Osh" brand primer......I base coat with Orchard "Osh" brand flat black......I airbrush 3 part Urethane clear......then I airbrush the Alclad 30 PSI.......thanks
  7. Tim......thank you!!!!!......that was too funny......that made my day.......Dang ,I wish we could hang out.
  8. Randy........BLAH_BLAH_BLAH_BLAH, this is just insane.........your are just to dang gooooooood !!!!!!.......I love the detail man
  9. Hello.....thank you all so very very much for the kind comments......I really do appreciate them.......I attached the "Phonebooth" to the frame.....I made a firewall and painted it Alclad and attached that to the body.....I also attached the the trunk and added some fender braces......I attached the door to the booth......and attached the license pate and made a trans. dip stick......I also made the antique lantern lights and painted them Alclad......I just need to attach the radiator and headlights and tail light and then I will call it done .......thanks for looking
  10. Hello......thank you all so very much for the kind comments.......I really do appreciate them......I finished the engine,and attached the headers and oil pan.......I made a wood floor underneath the body and made a steering box and master cylinder both painted Alclad......I finished up the interior ......I made a push button control box ......I made a fuel tank with a electric fuel pump painted Alclad.....I also modified a battery to fit in the trunk...... I flocked the trunk black......I attached the body to the frame......I will work on the booth door and try and finish this up next......thanks for looking.
  11. Tim.....AMAZING ......you have some skills Brother!!!!!
  12. Hi Ed.......I will post a picture of what I used for the toggle switches on my next post......I used "Pro Tech" hex ends .......and some wire and wire insulation I had laying around.......thanks
  13. Hi Jim......yes,I put about 3 coats of clear to even out the tape......I will sand it smooth one more time and a add another coat of clear and it should look uniform......thanks
  14. Hello.......thank you all so very much for the kind comments........I really do appreciate them.......I got my decals from Gary with GWS decals.....thank you Dave Ryberg and Gary for the collaboration on the decals........I got a clear coat over the whole body......I need to sand it down smooth one more time for a final coat of clear.....I also made some Besels for the gauges and used Slixx decal gauges.......I made some winshield wipers ...........I used "Pro Tech" nut and bolt ends for the Booth and a throttle linkage.....I got the glass instaled ,and attached the dash board, gas pedal, steering wheel,telephone and winshield wipers........I painted the diamond plate floor, dash board, foot gas pedal, and steering wheel chrome Alaclad with a hand painted wood grain steering rim.....thanks for looking.
  15. Hello......thank you all so very much for the kind comments......I really do appreciate them.......My friend Ken Cornett told me about some really thin white pin stripe tape that would be perfect for the stripping on this build......it`s called "Line O Tape" I used size .010 x120".......they have different sizes and colors ......I`m ready to clear coat the body and I should have the decals in a couple of days......thanks for looking
  16. Hello.......thank you all so very much for the kind comments.......I really do appreciate them.......I finished airbrushing round 2 of the graphics today ......I will airbrush round 3 of the graphics tomorrow.......I should be able to a clear coat too......thanks for looking
×
×
  • Create New...