Ace-Garageguy

This setup has worked great for me, and it is relatively cheap, and VERY bright. On the left is a magnifying lens-lamp I got at an art-supply store scratch & dent sale for $15. It was designed to take a 100watt incandescent bulb, but I modified it (very slightly) to take a compact flourescent, which has the same screw base, and makes negligible heat. The compact flourescent bulb only takes 25 watts to make the same amount of light as a 100 watt incandescent. The other two swing-arm lamps I got at Goodwill for $5 each. They are rated for only 60 watt bulbs, but because a 100 watt comparable-light compact flourescent only takes 25 watts, I installed two of those. Compact flourescents come in soft white and daylight-balanced color temperatures, so you can mix and match bulbs to suit the kind of light you prefer. I use two soft whites (which are more blue) and one daylight (more yellow). It's very bright, like I said, and you can put the light exactly where you need it. The actual light falling on the desk would take 300 watts using incandescent bulbs, but only 75 watts using compact flourescents, so it saves on your power bill too.

Thanks a lot, Andy. I really appreciate it. ........and I just found one and bought it. Thanks again.

What they said...beautiful work.

Thanks gman. I'll be looking for one. I assume that the "fat fendered" version doesn't have a louvered hood, even though it's pictured on the box. Is that correct?

Wow. It's certainly not often in business that one encounters such a loyal and satisfied group of customers as have replied here. I've been getting around to making my first order from Modelhaus, and thanks to this response, it will go out this week. Probably. I'm ALWAYS late.

Fascinating........

What does the original issue box-art look like? I'd really like to get a louverd hood for this. 3" chop, 1" channel, Corvette C5 chassis, 4-cam Ford 4.6.......

Yup, and use this, with plenty of water. http://www.ebay.com/itm/Micro-Mesh-2-square-foam-Sanding-Pads-Made-in-USA-/320868289884?pt=LH_DefaultDomain_0&hash=item4ab53d8d5c Start with the coarsest first, work your way to the finest. I usually finish up with a rubout using 3M Perfect It 6068 polish at the end. Do it right and it'll look like glass.

Yes, it should work. Vacuum is vacuum. At the rated 4.2 cubic feet per minute on the label, it should move enough air quick enough to de-gas your resin, especailly in a smallish mold. You really need some kind of vacuum gauge on the line, with a bleeder valve. i've seen people get carried away thinking more vacuum is better, and collapse a mold. It is important to be able to evacuate the resin quick, before it starts to gel. You need to experiment. Here is a link to some free online resin casting and mold-making videos.....highly recommended if you've never done this kind of thing before. http://www.freemansupply.com/video.htm

2000 is about the finest commonly available for 1:1 cars. It's fine enough to let you bring the gloss back up on a real car where you'll be using a power buffer. It's not really fine enough for models, where you'll be rubbing the polish by hand. Detail Master also makes very fine sandpaper and the MicroMesh polishing system, which is what I use now. http://www.ebay.com/itm/Micro-Mesh-2-square-foam-Sanding-Pads-Made-in-USA-/320868289884?pt=LH_DefaultDomain_0&hash=item4ab53d8d5c This car was done with MicroMesh, as mentioned above.

Lots of cool stuff happening on this build. Very nice work.

Wow, absolutely beautiful. Really an inspiration to start working on my detail skills. Just love a 409 too.

Really cool. I've got a couple of '55 Chevy pickups that need to morph into something like this.

GREAT idea, and yes, it would make a teriffic model. Hope you don't mind if I put it in my ideas-to-steal file. I'll give you design credit if I ever get around to building it.

Man, I LOVE that chopped and dropped conventional Pete. Baddest tractor I think I've ever seen. Kinda overkill for hauling bikes, but everybody would sure notice whan you pulled up with that rig. Wicked.

You've definitely got talent. Keep at it, like the man said above.

Great looking frame..........this should be really good.......

The '41 thru '48 Chevys shared body shells, suspension, engines, frames, etc. The post WWII '46-'48 cars were facelifted '42s, and '41 was the first version of this particular model run. A starting point for a '41 might be the Galaxie '48 Chevy. It would take a fair bit of work, but it's possible. Though the Galaxie '48 is a fastback, the roofline from a Monogram '39 could be a start there.

Love it. One of the most convincing pieces of weathering I've ever seen.

Lots of things about this model I like. The general proportions, top-chop and the semi-pancaked, reverse-opening decklid and taillights are great. Nice paint. The molded skirts look really cool, but it would sure be hard to change a tire. Did you lengthen the rear quarters? They look good too. Sharp looking build.

Though it's 1/25, the AMT '37 Chevy might offer a starting place for an interior. Also, the '37 and '38 frames were interchangeable, but there were some differences on the '39. The design of the frame rail cross-section was the same "top-hat" style, but I think the rear of the '39 rails behind the axle hump were at a different angle. So the AMT '37 frame may offer some advantages as well. The rails on the RM version are awfully skinny. The RM suspension is actually fairly accurate, unless you're doing a Master Deluxe, which had independent front "knee action" suspension. If you want to do a Master Deluxe, the front suspension from the Galaxie '48 Chevy would give a good approximation. That kit, also 1/25, has some good period speed parts for the old stovebolt six.

The '33 and '34 Plymouths are very similar, but the '32 is a different, slightly older looking design. I'm just finishing the metal work on this '33 coupe, which is why I'm pretty certain the '32 is different. I was going to suggest Fred's '33-34 coupe body as a starting point, but they're just not close enough. Probably easier modifying a styrene Ford.

Yup, my '74 Chevelle wagon has a dropped floorpan there to accomodate feet when there was a reversed rear seat, and the tank lives in the quarter panel.

Man, that looks GREAT !!. Everything is right on the money. Nice job.

Only time I bother with primer on chassis or interior parts is if I've done some mods, like shaving interior door handles, or filling sinks in a chassis rail. Then primer is mandatory, as well as sanding and re-priming the areas as necessary. If parts have no mods, I scrub them with Comet and an old toothbrush (especially inside corners), carefully dry, and paint away. No problems so far in the 5 years I've been back in the hobby.