1980's MotorMaster model kit

[model1:25th scale]

Hi all I am going to be working on the Decepticon motor master model kit, I will be using the 1980's version, 

Picture will be up soon of the Revell Kenworth K-100 Aerodyne Cabover that I will be using, I am waiting on the trailer from ebay. I will be using a nascar hauler trailer model kit, since I am having bad luck find the amt beaded trailer.

anyways thanks for stopping by and having a look

p.s I will be trying to add LED light on this kit as well, looking into a micro drill for the 1:25 scale model kit.

I have added a few picture of the transformer from the 1980's, so you can see what the MotorMaster looked like from the 1980's transformers, and once again thank you for stopping in and having a look,

again i know it's been a few years since I have posted 

[model1:25th scale]

The last two pictures I will be using the purple because it was in the 1980's where Optimus Prime and MotorMaster played chicken and MotorMaster was purple and black ( and I will not paint over the chrome on the side of the Cab,)

Edited March 5, 2018 by model1:25th scale

[model1:25th scale]

Here is the Model Kit I will be using to make the 1980's MotorMaster, It's by Revell Kenworth K-100 Aerodyne, I am also waiting on the delivery of the Nascar trailer model kit to come in today That i will be using for the trailer, since I could not find the Amt beaded trailer, but it would work, thanks for stopping in and having a look, please leave your comments

[Jantrix]

Interesting project. I'll be following along.

[model1:25th scale]

Thank you for the follow, I'm new to the whole idea with Fiber optic and LED Lighting,. but a first time for everything, Thank you again for the follow

 

Edited March 5, 2018 by model1:25th scale
Fix a misspelling thank you

[model1:25th scale]

I gotten the Nascar trailer in about 25 ,minutes ago,here is the picture of the trailer. Wish I could have found the Beaded trailer from AMT, but again Got work with what is out there, and this trailer i won from E bay for $10.00 so I really can not complain.

[model1:25th scale]

Here is the trailer frame painted With the Purple thanks for reading and stopping by,

(I am looking for some information or ideas on the Lighting the tail lights, I have Fiber Optics and LED pre-wire and resistor

and Idea) thank you again for stopping by and reading, Hope you enjoy this build,. I have a battery trays that is 4 C- Batteries, and 6 double A battery trays, with on and off switch, 

[Jantrix]

1 hour ago, model1:25th scale said:

I get that you are trying to save time, spraying everything on the sprue, but that doesn't really let you clean up the parts. See the little circles on all those parts? Those are ejector pin marks left over from the injection molding process. Ejector pins push the sprue from the mold as it's cooling. The faster the machine, the worse the marks as the plastic is still soft. Those should be sanded smooth as well as any other mold lines on the parts for the best possible fit and appearance.

[model1:25th scale]

 appericate the info very helpful.

Edited March 11, 2018 by model1:25th scale

[model1:25th scale]

Jantrix Thanks for the information it work out better, gotta a touch up on the axles,

It does make it easier. 

Edited March 8, 2018 by model1:25th scale
Misspelled a word

[model1:25th scale]

The trailer frame axle 

[model1:25th scale]

OK i am waiting on more paint for this kit build and I thought I will share with you all my next idea to make this complete.. Since I have a Nascar trailer for this model build. If you look at the picture you will see a black car with 2 front ends,

So fo this I bought two Revell 1/24 Lamborghini Countach LP500S Plastic Model Kit, I will cut these two cars in half and glued the two front ends together to make this, I am also trying to figure out how to add the (Fiber optic's) or (led) (halogen) to this, I have 4 double A battery terminals and 1 C-Battery terminal. any ideas thank you for viewing and posting your comments.  Sorry for the CAPS.

Edited March 16, 2018 by model1:25th scale

[model1:25th scale]

Here is the ghost light gray I am using. This is one side of the trailer again waiting on more paint to come in it's by 

Testor Corp.

Light Ghost Gray Testors Acrylic Plastic Model Paint

Thank you all again for viewing and posting your comments.

[model1:25th scale]

Here is some up to date on the tractor,  (any Idea for the trailer that is wrap?) how to correct this ? I have tryed warm water soak for and hour and then put some weight on it. Still bows 

[Fat Brian]

I think you and I are wanting to build the same truck. I haven't started yet but yours looks good, I'm waiting to see how you finish it.

[DRIPTROIT 71]

Looks good!

[model1:25th scale]

Finished the Motor Master tractor three days ago. and Finished the trailer well waiting on the bare metal foil to come in from amazon, so I can add the pin stripping and the decepitcon logo to the trailer, Sorry the rims is not Brown I was close when I took these pictures The 2 car in the picture i will be cutting in half to make Motor Masters car, but not sure which side to cut, gotta mke them the same, I will enclose the picture of the 1980's car for Motor master 

[spencer1984]

Awesome project, and Motormaster looks great!  I really like the idea for his scout car, looking forward to seeing what you do with that.

Also, nice to see another 1/25 Optimus Prime!  Do you have any more pics of him?

[extmcdriver]

Impressive project!

[gatorincebu]

Interesting project !

 

 

 Be Well

  Gator