Temporary Holding

[Chevy II]

What do you guys use to temporarily attach a piece that you are needing to hold in place for mock up? Something that will let you easily remove the piece without damaging it.

Elmer's glue?

[Straightliner59]

Alene's Tacky Glue. Elmer's makes a similar product, but, it's not their regular glue.

[BigTallDad]

Here's some more info on Aleene's

https://www.michaels.com/aleenes-original-tacky-glue/10503417.html?cm_mmc=PLASearch-_-google-_-MICH_National_PLA_Shopping_Null_Null_Papercraft_General-_-Papercraft&&cm_mmc=PLASearch-_-google-_-MICH_National_PLA_Shopping_Null_Null_Papercraft_General-_-Papercraft&gclid=CjwKCAiAv9riBRANEiwA9Dqv1ShAxNQY1yOhlKi_AAedfhjL5wocZ0qrSm6BxUVp2Y-AXUoQH9p5mBoCg8IQAvD_BwE&gclsrc=aw.ds

 

[Tommy124]

On 3.2.2019 at 6:54 AM, Chevy II said:

What do you guys use to temporarily attach a piece that you are needing to hold in place for mock up? Something that will let you easily remove the piece without damaging it.

I use Pacer's canopy glue. 

[StevenGuthmiller]

I feel like a broken record every time I respond to this question, but I have yet to find a better glue for mock ups than “Laser Bond”.

What other glue will give you an instantaneous bond that can be easily taken apart in seconds.

I recently mocked up an entire Ford engine, (I’m guessing in excess of 20 pieces) in less than five minutes, then took it apart again in probably less than 1 minute.

If you can do that with any other glues, I would be interested to hear about them.

 

 

Steve