11" Finned Drum Brakes

[250 Testa Rossa]

Is there anyone out there who makes 11" drum brakes for a 1965/66 Shelby GT350? Tried using the Replicas & Miniatures Co. of Maryland '40 Ford brakes, and they are much too large. Any other suggestions?

Thanks

[440 Dakota]

Maybe something here  would work but I have no idea what Mustang drums should look like

Edited February 19, 2019 by 440 Dakota

[ScottH454]

I make ones modeled after GM drums.  Don't know what these scale up to but you can see there 9/16.

[250 Testa Rossa]

This is what I'm going for, and the drums are smaller than the wheel itself. 

[250 Testa Rossa]

This is how big the drum is compared to the wheel. 

[ChrisBcritter]

The brake drums in the '53 Studebaker kit might fill the bill, except they don't have the fins.

[sfhess]

Check Scenes Unlimited on eBay.

Here's an example:  https://www.ebay.com/itm/RESIN-1-25-FINNED-HOLLOW-BRAKE-DRUMS-B10/163491347397?hash=item2610d7fbc5:g:y1QAAOSw8Pda2UtU:rk:12:pf:0

[250 Testa Rossa]

On 2/20/2019 at 10:53 AM, sfhess said:

Check Scenes Unlimited on eBay.

Here's an example:  https://www.ebay.com/itm/RESIN-1-25-FINNED-HOLLOW-BRAKE-DRUMS-B10/163491347397?hash=item2610d7fbc5:g:y1QAAOSw8Pda2UtU:rk:12:pf:0

I tried them and they said their brakes were too big.

[sfhess]

11 hours ago, 250 Testa Rossa said:

I tried them and they said their brakes were too big.

Bummer.

[jas1957]

Maybe this is being picky but the drums you have pictured are 10” drums.  You can clearly see where it is stamped “ MAX DIA 10.060,  brake drum sizes are measured by the inside diameter. 

[250 Testa Rossa]

8 hours ago, jas1957 said:

Maybe this is being picky but the drums you have pictured are 10” drums.  You can clearly see where it is stamped “ MAX DIA 10.060,  brake drum sizes are measured by the inside diameter. 

Thanks for the heads up on that. 10" will also work.