RhythmDawg Posted September 10, 2021 Posted September 10, 2021 Hi Any suggestions for an alternative for the discontinued MM Gloss Clear Lacquer Finish #2017? Testors Glosscote Enamel, Alclad II Klear Kate, Tamiya X22? I’m looking for a clear coat to airbrush over Testor’s Enamel Gloss Metallic Lime (cut with lacquer thinner), before I do the decals/detailing. Thanks and take care
John Pol Posted September 10, 2021 Posted September 10, 2021 I use automotive 2K clear and you can spray that over anything
Snake45 Posted September 10, 2021 Posted September 10, 2021 My go-to now is Rustoleum "High Lustre Coating" lacquer, available at Walmart. Applied lightly at first, it works just fine over Testor enamels. I don't even bother to decant it, just shoot it right from the can.
Zippi Posted September 12, 2021 Posted September 12, 2021 I'm with Snake. I think what I use is about the same.
10543Modeler Posted September 13, 2021 Posted September 13, 2021 I use the Rustoleum also & am very pleased with it.
DannyDodge Posted September 20, 2021 Posted September 20, 2021 ive had great results with testors extreme lacquer wet look clear
RhythmDawg Posted September 21, 2021 Author Posted September 21, 2021 Well I tried the Rust-oleum and the results weren't too bad (I still prefer air-brushing), but I made a mess of the car hood when I dropped it while it was still wet ? Is there any way to remove/smooth the clear coat without taking off the enamel paint?
TarheelRick Posted September 21, 2021 Posted September 21, 2021 On 9/21/2021 at 5:31 PM, RhythmDawg said: Well I tried the Rust-oleum and the results weren't too bad (I still prefer air-brushing), but I made a mess of the car hood when I dropped it while it was still wet ? Is there any way to remove/smooth the clear coat without taking off the enamel paint? Expand My only suggestion would be to let it dry sufficiently, week or so, than very carefully with 1000 or better grit paper, wet sand down to the enamel.
davysmodels Posted September 25, 2021 Posted September 25, 2021 Have been using UPOL-1 clear. Great from the spray can, but i decant and airbrush. There are online videos of the Upol. Always perform a test first when using a new product. UPOL-1 0796 Clear gloss
RhythmDawg Posted September 25, 2021 Author Posted September 25, 2021 (edited) If I wanted to decant and airbrush the Rust-oleum or UPOL-1, would I need a lacquer thinner and what ratio for thinner is recommended: 2(clear):1(thinner). I just checked and it doesn't look like the UPOL is available in Canada. Bummer. Edited September 25, 2021 by RhythmDawg
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now