Saltie Olds Posted June 1, 2022 Posted June 1, 2022 (edited) I just figured out what the main color is going to be, now to figure out the secondary color, probably will be black. I’m going to use the Left Hand Drive dash, from the Tamiya Supra, the black one I just did titled Project Shadow, and the tires from that same kit. I’m going to get a different set of wheels for the car as well. So it’ll be a while before I’m able to get the wheels, unless I could get a set of Revell Ferrari Testarossa wheels to work. Edited June 2, 2022 by Saltie Olds
Saltie Olds Posted June 1, 2022 Author Posted June 1, 2022 Here’s a couple pictures of the car just sitting on the wheels and tires and one of just the wheels and tires. Thinking about going with a different style of wheel though.
Saltie Olds Posted June 1, 2022 Author Posted June 1, 2022 Here’s the wheels I’m thinking about getting for this project. I can’t decide on a style I like best. The style that gets 5 likes or interests will be going on the car.Wheel #1Wheel #2Wheel #3Wheel #4Wheel #5Wheel #6
stitchdup Posted June 1, 2022 Posted June 1, 2022 I'd go for the 16" volk six spokes, the others will be far too big for the wheel arches
Saltie Olds Posted June 1, 2022 Author Posted June 1, 2022 1 hour ago, stitchdup said: I'd go for the 16" volk six spokes, the others will be far too big for the wheel arches Those and wheels #4, are my favorite two styles.
Saltie Olds Posted June 1, 2022 Author Posted June 1, 2022 1 hour ago, clipper57 said: I like wheel #2 also. Cool. Wheels #2 it is. Thank You.
Sandboarder Posted June 2, 2022 Posted June 2, 2022 Either the 16” TE37’s or the R32 GT-R wheels IMO. The 19” TE37’s would look like a Summernats car.
Saltie Olds Posted June 2, 2022 Author Posted June 2, 2022 2 hours ago, Sandboarder said: Either the 16” TE37’s or the R32 GT-R wheels IMO. The 19” TE37’s would look like a Summernats car. Thank You. Those are my favorite two wheels.
Saltie Olds Posted June 2, 2022 Author Posted June 2, 2022 So here are some pictures of my car. I did a Testors Black Chrome base color and then Testors Turquoise Waters color. The first four pictures were taken before the second four pictures.
Saltie Olds Posted June 2, 2022 Author Posted June 2, 2022 I just clearcoated the car it’s hard to get good pictures of the car, with this color I used. 1
Saltie Olds Posted June 2, 2022 Author Posted June 2, 2022 Temporary set of wheels, for my AE86 Levin. I’ll use these until I could get a set of those other wheels, unless I really like the way these look on the car.
Saltie Olds Posted June 2, 2022 Author Posted June 2, 2022 Getting the windows taken care of. Now I just need to cut off the door windows and I’ll be done with them, except for doing the detail painting.
Saltie Olds Posted June 2, 2022 Author Posted June 2, 2022 Does anyone know how I’d wire the distributor, on the 4A GE engine? I know the firing order is 1-3-4-2, but where does the wire from the middle of the cap go?
Leica007 Posted June 3, 2022 Posted June 3, 2022 The center post on a distributor is usually the wire to the an ignition coil, hope your kit included that part. If not you can make one easily.
Saltie Olds Posted June 3, 2022 Author Posted June 3, 2022 3 hours ago, Leica007 said: The center post on a distributor is usually the wire to the an ignition coil, hope your kit included that part. If not you can make one easily. No, the kit didn’t come with one. I’ll just rob one from another kit.
Saltie Olds Posted June 3, 2022 Author Posted June 3, 2022 1 hour ago, Pierre_tec said: Nice project, and nice shine also. Thank You
Saltie Olds Posted June 4, 2022 Author Posted June 4, 2022 Here’s a mock up of my car. The wheels & tires are only going to be used until I’m able to get those white wheels I’m wanting for this car.
Saltie Olds Posted June 4, 2022 Author Posted June 4, 2022 Here’s a picture of the interior and the engine. I’m attempting to convert the dash to be left hand drive. When I can, I’ll be getting another one of these kits and get the Initial D version of this kit, and use some parts from that one, on the other one like this.
Saltie Olds Posted June 4, 2022 Author Posted June 4, 2022 Here’s a few more pictures of this project. I’ve been having a lot of fun with this build.
Saltie Olds Posted June 4, 2022 Author Posted June 4, 2022 Just got done with converting the dash to be left hand drive. I wish there was one just like it that was left hand drive.
Saltie Olds Posted June 4, 2022 Author Posted June 4, 2022 Getting there. This has Ben such a really fun build to do. Can’t wait until I get to do my next one.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now