Rick Wolfe Posted July 31, 2023 Posted July 31, 2023 I'm in the middle of building Atlantis Earth vs. the flying saucers and it includes a cardboard back drop of the capital and I made a wooden display for it, So what spray glue should I use so the cardboard doesn't wrinkle ? Thank you, I even bought a couple of robots for this and their about the size of a grain of rice. Again Think you.
stitchdup Posted July 31, 2023 Posted July 31, 2023 if you are just wanting to stick it to a wooden board i would use carpet tape rather than spray glue. much less mess and its not wet so little chance of wrinkling. 1
Rick Wolfe Posted August 1, 2023 Author Posted August 1, 2023 Thank you Les, yes I thought about double sided tape but I was afraid after awhile the tape would start loseing it's sticky-ness and start to peel, if nothing come up by the end of the week I'll use the D/S tape, have plenty of it at work. Thank you for taking the time for answering, Rick
stitchdup Posted August 1, 2023 Posted August 1, 2023 5 hours ago, Rick Wolfe said: Thank you Les, yes I thought about double sided tape but I was afraid after awhile the tape would start loseing it's sticky-ness and start to peel, if nothing come up by the end of the week I'll use the D/S tape, have plenty of it at work. Thank you for taking the time for answering, Rick if you get the carpet tape version it wont lift as long as the surfaces are clean. the normal double sided tape tends to be for lighter things like scrapbooking. It doesn't hold heavier iten that well while the carpet tape will stick a carpet to walls and keep holding on.
Chariots of Fire Posted August 1, 2023 Posted August 1, 2023 If you are not concerned about it being permanent, use some contact cement. Spread on the cardboard, spread on the wood board and when both are dry to the touch put them together. They will never be parted again!? 1
Rick Wolfe Posted August 3, 2023 Author Posted August 3, 2023 Thank you Charles, the reason I'm asking is I don't want to use a glue and a little while later it starts to wrinkle the cardboard, I think I'll use Les's idea and use double sided tape, and also I use d/s tape at work and as our model club says Free stuff rules, Again thank you for taking the time. if I can figure out how to post I try and post a few pictures.
peteski Posted August 5, 2023 Posted August 5, 2023 The old-fashion "stinky" (not water-based) contact cement should not wrinkle cardboard or paper. Also any spray adhesives that are not water-based should not wrinkle cardboard or paper - they are designed to be compatible with paper. If you are worried, try it on some similar type of cardboard or even paper. As far as carpet tape goes, unlike masking or duct tapes it has a very strong and permanent (read long-lasting) adhesive. Should be permanent.
Rick Wolfe Posted August 8, 2023 Author Posted August 8, 2023 Thank you for the reply Peter, wished I'd seen this earlier I've already taped it down, but I do have another project and that's what I needed to know, again Thank you. 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now