ScrappyJ Posted March 24, 2010 Share Posted March 24, 2010 (edited) This has been a project in the making for about 4-5 years. Most of what you see, was done in the first 3-months of the build, but I was able to get some work done by my friend Bob Dudek (the best machinist I know personally). I hope to get this one finished soon as I have promised Larry three of them, one for himself and the other two for his co-crew chiefs (his brother Steve McBride and Roland). Couple of pics include the side plates Bob so masterfully replicated in Aluminum for me. On the left is a plastic, styrene master I made for Bob to replicate. Price of plastic, $0.45; cost of my time, free; cost of part...$45/hr; expression on face when you receive the part, priceless: The side plate and the front brace (just in front of the output primary from the crankshaft). Also machined by master machinist, Bob Dudek The primary side plate on the bike with the front brace This is the side plate for the output from the transmission. It helps to stabilize the sprocket (over 1,400 HP and if you ever hear or seen them, they sound almost like the TF cars, wicked) In the following picture, I made the one on the left, free-hand and Bob copied it for me Here are a few links to some Youtube coverage of these bikes. Sub six second runs, over 240-250 mph: Edited March 24, 2010 by ScrappyJ Quote Link to comment Share on other sites More sharing options...
Blake Rogers Posted March 24, 2010 Share Posted March 24, 2010 great work man what motor is in her i want to see more of this one plz Quote Link to comment Share on other sites More sharing options...
ScrappyJ Posted March 24, 2010 Author Share Posted March 24, 2010 Thanks, Blake! Most of these bikes have their own bottom-end and cylinder design and run heavily-modified heads. Larry was sporting a Kawasaki head, but I think he's switched to Suzuki. I had an old Katana head, so modified it to sit a-top of the bottom-end and cylinders I machined. I've posted pics on here before, but it has been so long, I'll post some again. Hopefully, I can get some decent progress going again. Bob Dudek beadlock wheels. Exquisite: Quote Link to comment Share on other sites More sharing options...
Modelmartin Posted March 24, 2010 Share Posted March 24, 2010 That is very cool and typically for you, extremely well done! I like it. A lot. Quote Link to comment Share on other sites More sharing options...
Dr. Cranky Posted March 24, 2010 Share Posted March 24, 2010 Wow, amazing scratchbuilding going on. Fabulous craftsmanship. Keep it going. Quote Link to comment Share on other sites More sharing options...
Smart-Resins Posted March 24, 2010 Share Posted March 24, 2010 Super looking bike! Jody Quote Link to comment Share on other sites More sharing options...
Bobdude Posted March 25, 2010 Share Posted March 25, 2010 Dirk, It appears you have a good handle on your project.Bob Quote Link to comment Share on other sites More sharing options...
RatRod Posted March 25, 2010 Share Posted March 25, 2010 WOW!!! Great execution Dirk. What a great bunch of talent, and skills being put to work here!!! Quote Link to comment Share on other sites More sharing options...
frozono Posted March 25, 2010 Share Posted March 25, 2010 speechless . excellent Quote Link to comment Share on other sites More sharing options...
weasel Posted March 26, 2010 Share Posted March 26, 2010 WOWOWOWOWOW...i'm watching this one... Quote Link to comment Share on other sites More sharing options...
pharr7226 Posted March 26, 2010 Share Posted March 26, 2010 I'm drooling all over my computer. This is FABulous work. The frame, cover, wheels... are incredible. I can't wait to see more. I wish that someone made a 1:25 or 1:24 scale drag bike so us mere mortals can get in on the action. Keep it up. I will watch this build with great anticipation. Quote Link to comment Share on other sites More sharing options...
58 Impala Posted March 27, 2010 Share Posted March 27, 2010 Hey Dirk, nice job. Are you going to the SpaceCoast IPMS show. I think the guys in the club (Tabletop Cruisers) would like to see your WIP. Quote Link to comment Share on other sites More sharing options...
Karmodeler2 Posted March 28, 2010 Share Posted March 28, 2010 Hey Dirk, Nice work. When you get to a decent level in model building, could you let me know so I could see some of your work in person? Looks like you are just barely past the "out of the box stock" phase. And before most of you blow a vein out of the side of your head, I'm teasing him. David Quote Link to comment Share on other sites More sharing options...
Bobdude Posted March 28, 2010 Share Posted March 28, 2010 I agree with you,Dave.Just today, I told Dirk for your next project he should try gluing a Snap Kit together. Quote Link to comment Share on other sites More sharing options...
Karmodeler2 Posted March 28, 2010 Share Posted March 28, 2010 I agree with you,Dave.Just today, I told Dirk for your next project he should try gluing a Snap Kit together. Now Bob, don't go "pushing" him into the advance stages, allow him to progress at his own pace. We want to see progress. Not just the journey there. David Quote Link to comment Share on other sites More sharing options...
Bobdude Posted March 28, 2010 Share Posted March 28, 2010 Dave,you are right.I can't expect Dirk to just jump into a Snap kit.I am sorry I suggested it. Quote Link to comment Share on other sites More sharing options...
Karmodeler2 Posted March 29, 2010 Share Posted March 29, 2010 Dave,you are right.I can't expect Dirk to just jump into a Snap kit.I am sorry I suggested it. No problem, Bob. Remember......"baby" steps...."baby" steps......we can let him run just yet!! Quote Link to comment Share on other sites More sharing options...
GTmike400 Posted March 30, 2010 Share Posted March 30, 2010 Looking sweet man, those parts are awesome! Quote Link to comment Share on other sites More sharing options...
ScrappyJ Posted March 30, 2010 Author Share Posted March 30, 2010 Thanks for the kind words and encouragement, Gents! @ Mike: Other than the CNC parts Bob did, it pales in comparison to that Evo project (just my opinion). @ Bob and Dave: Sometimes I feel like the Tootsie Roll Owl. I start out with good intentions, but then I get going and can't help myself. I do want to try an OOB, but I know it won't be anything like some of the fantastic OOB I see going on. Quote Link to comment Share on other sites More sharing options...
ScrappyJ Posted April 1, 2010 Author Share Posted April 1, 2010 Here are some pictures of the wood bucks I carved to vacuum-form the upper and lower fairings and the body. I forget what type of wood I used, but bought it from Michaels and it comes with about six 2X4X6 and several, various other sizes. In some cases, I had to glue pieces of wood together in order to get the proper dimension going. Once the bucks took their basic shapes, I used glazing putty to add back any areas that need it. Pics of the body buck and one with the vacuumed styrene in process of being trimmed: The buck for the bottom fairing that covers the fuel cell area: The buck for the upper fairing: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.