Pete1980 Posted May 21, 2010 Posted May 21, 2010 (edited) So I just got this in the mail.It was cheep and I wanted to build one to see how they are,the 25th scale models that is.I prefer 24th cause they are usually better detailed factory and bigger.Although this seems pretty detailed.Ideas or opinions on colors or certain tricks for a better build are welcome. Edited May 22, 2010 by Pete1980
Pete1980 Posted May 23, 2010 Author Posted May 23, 2010 Ok so Ive got some progress but hit a snag.Ahhhhhh!!!!I hate humidity!I shot my base coat and was shooting my clear and wouldnt ya know it, it hazed.Only two bad spots on the left rear corner of the cab and front left of the sleeper, where they meet.I cleared with dulpicolor clear, my question is could I wet sand this spot out.I know its a paint question but thought Id ask the truckers first.Thnx for any help.
Tony Bryan Posted May 25, 2010 Posted May 25, 2010 My 6yr old daughter is building this kit, she has done 5 models so far, so I wanted her to do something a little more challenging, and what a small mistake that was, she built the 1/32 t600 with no problems, and was great for her, but this kit is a hand full, especially with the wheels and some of the fitment, she has struggled, which I have done for her The only thing good about this kit is the CAT motor, ( there is that C word again) which I stole, chopped up and fitted to a KFS excavator, I have something else she can fit in there which will more than likely be painted orange or purple anyway........ ahhhh kids
mackinac359 Posted May 25, 2010 Posted May 25, 2010 The tires are the worst part of this kit. The tires don't like to stay seated on the rims without the help of a thin bead of superglue. Tim
Danno Posted May 25, 2010 Posted May 25, 2010 The tires are the worst part of this kit. The tires don't like to stay seated on the rims without the help of a thin bead of superglue. Tim Tim, Does this kit have the same engine/chassis/wheels/tires components that were in the Revell 359 Pumper Fire Engine kit from many moons ago? If this kit has those same thin hollow tires, then I know exactly what you mean about the tires and wheels not having positive fitment. You mentioned a bead of superglue. What's your recommended procedure? Thanks in advance!!
Guest Johnny Posted May 25, 2010 Posted May 25, 2010 The tires are the worst part of this kit. The tires don't like to stay seated on the rims without the help of a thin bead of superglue. Tim I remember even the old AMT tires drawing in at the beads. I always solved this problem by twisting kleenex and stuffing the tires with it! Worked pretty good!
highway Posted May 25, 2010 Posted May 25, 2010 I remember even the old AMT tires drawing in at the beads. I always solved this problem by twisting kleenex and stuffing the tires with it! Worked pretty good! That's a good idea, but if I remember the Revell tires, I know they have the webbing used to sandwich the tires between the wheel pieces, since this was a snap kit at one time. I can't remember if there is a hollow area to stuff the inside of the tires from or if they are solid around the bead. I replaced the ones on my 359 with Italeri Peterbilt wheels and tires from the 377 A/E kit.
Pete1980 Posted May 25, 2010 Author Posted May 25, 2010 Well that small mistake is now holding me up.This was suposed to be a quick build nice n easy for a break from the tri drive but alas, no such luck.I do not have a paint booth so have to paint outside.The blue is Nassau Blue Metallic from testors.Its a base coat lacquer which i didnt know Testors had.It sprayed great even outside.Then I sprayed my clear and well there ya go.
Pete1980 Posted May 29, 2010 Author Posted May 29, 2010 Here is my first attempt on mutl colors.You can see the haze in a few spots but Im done with it so Ill keep going on the rest.
Kostas Parchas Posted May 29, 2010 Posted May 29, 2010 Nice!!! I like this color combo very much! Kostas.
Pete1980 Posted May 31, 2010 Author Posted May 31, 2010 (edited) Thnx guys!Well going slowly but this week the chassis should be done and will start the interior soon.Im just going basic on this one so go easy, lol.I guess theres not much to judge yet anyway but...Itll get a little BMF here n there and couldve added a bit more white down low on the hood but I like it.kinda 70s ish, I think. Edited May 31, 2010 by Pete1980
highway Posted May 31, 2010 Posted May 31, 2010 It's looking good the way it is, Dave. It might have been ok with more white at the bottom, but then again I think it would have also looked nice without the white on the roof and just the white fenders.
Pete1980 Posted May 31, 2010 Author Posted May 31, 2010 Yeah thnx Highway.I get kinda picky yaknow.Color is important.It must be just right.Im movin on with it now so we will see how it turns out.
Pete1980 Posted May 31, 2010 Author Posted May 31, 2010 Thnx Leo I plan on experimenting more with the color in the future.
highway Posted May 31, 2010 Posted May 31, 2010 Yeah thnx Highway.I get kinda picky yaknow.Color is important.It must be just right.Im movin on with it now so we will see how it turns out. You are SOOO right about colors! I couldn't tell you how many builds I have sitting half built because I can't come up with a color choice!
Pete1980 Posted May 31, 2010 Author Posted May 31, 2010 LOL yup highway!I know that one for sure, my tri drive is still half done or less an neither truck has interior color yet! Thnx Paul.Ive seen yer builds very nice.Ill take that compliment anyday.
Pete1980 Posted June 1, 2010 Author Posted June 1, 2010 Got a bit done today, not as much as I wanted but I had to break out the RC truck n play for a bit and played a little COD4, and cleaned the 55gal salt water tank, and help the guy across the street work on his car....Nice relaxing day. So I washed the grill a bit I didnt wanna go to heavy, got a little BMF on and got some brakets added to the sides of the cab.
Blake Rogers Posted June 2, 2010 Posted June 2, 2010 (edited) You are SOOO right about colors! I couldn't tell you how many builds I have sitting half built because I can't come up with a color choice! u don't know the half of it man :lol: oh buy the way great looking truck man i love it so far Edited June 2, 2010 by moparfan426
huffanpuff Posted June 3, 2010 Posted June 3, 2010 are you going to paint under the fenders white at frame?
toplessfury Posted June 3, 2010 Posted June 3, 2010 (edited) hey that is looking good.i also recently did my first truck and it was the same kit here is mine sorry didnt mean to hijack your thread. Edited June 3, 2010 by toplessfury
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now