exesivefire Posted September 24, 2010 Share Posted September 24, 2010 (edited) Hey guys, Was really into building in my mid teens (a good decade ago) and life steered me in a different direction for a while. Recently decided to pick it back up, and start with what was supposed to be a quick easy build, we will see if I can keep it that way. Quickly realized I would have to Z the frame to get a stance I liked Initial mock-up with full height cab, stock bed floor, and bob'd bed. Using a front axle from a Revell 32 Ford to get the stance lower in the front Mock-up after chopping the top, and raising the bed floor. Pulled a SBC from a revell 69 Nova, mounted with new mounts and a trans cross member. primer on the cab and bed, made a new smooth bed floor, and modified and installed the front visor and a recessed firewall. Wheels and tires are from the Revell 29 kit. You can also see a hint at the colors to come. Still have some minor finish work to do before paint, need to sort out the interior as well. That's all for now. Edited October 14, 2010 by exesivefire Quote Link to comment Share on other sites More sharing options...
highway Posted September 24, 2010 Share Posted September 24, 2010 Recently decided to pick it back up, and start with what was supposed to be a quick easy build, we will see if I can keep it that way. Welcome back to the hobby and welcome to the forum. Nice work so far, I can't wait to see how it turns out. All I can say though is if chopping the roof, "Z"ing the frame and bobbing the bed is your idea of a quick easy build, I'd hate to see what your idea of a hard build would be! Quote Link to comment Share on other sites More sharing options...
LAone Posted September 24, 2010 Share Posted September 24, 2010 looking good bud. loke where this is going. Quote Link to comment Share on other sites More sharing options...
MZ 500 Posted September 24, 2010 Share Posted September 24, 2010 Wow I like what you have so far... Reminds me of this one I saw a few years back. Quote Link to comment Share on other sites More sharing options...
b_lever1 Posted September 24, 2010 Share Posted September 24, 2010 welcome back life is hard reality is even harder models for me have been the answer Quote Link to comment Share on other sites More sharing options...
MikeMc Posted September 24, 2010 Share Posted September 24, 2010 Hey Andy....Welcome To our nuthouse! The '34 is way kool and is a great kit to mess with...I did the same thing a few years back....went with Big Wheels But I do love your visor...gotta do it on the next one!! Quote Link to comment Share on other sites More sharing options...
BigEdsGarage Posted September 24, 2010 Share Posted September 24, 2010 Looks great so far. I'll be watching this build. Can't wait to see more! Quote Link to comment Share on other sites More sharing options...
melo Posted September 24, 2010 Share Posted September 24, 2010 looks very nice. by the way where can i get this kit? Quote Link to comment Share on other sites More sharing options...
vizio93 Posted September 24, 2010 Share Posted September 24, 2010 Nice job man, hopefully you'll see my 34' Under Glass, this weekend. Quote Link to comment Share on other sites More sharing options...
crazyjim Posted September 24, 2010 Share Posted September 24, 2010 Welcome back. Your pickup is looking terrific. Quote Link to comment Share on other sites More sharing options...
exesivefire Posted September 25, 2010 Author Share Posted September 25, 2010 (edited) thanks for the kind words guys, MikeMc, at least I know my color choice will look good This is the Lindburg 34 ford kit for those who asked. I do tend to go a little overboard I guess, this was a little more than I originally planned, but I think we can keep it "simple" Did a little work to the engine today, installed the intake and accessories, wired up the plug wires, and made a set of headers out of .080 rod and 1/8th inch tube. Edited September 25, 2010 by exesivefire Quote Link to comment Share on other sites More sharing options...
Harry P. Posted September 25, 2010 Share Posted September 25, 2010 Nice work... Now use a small brush to paint the header flanges (molded onto the cylinder heads) to match the headers for a much more realistic look... Quote Link to comment Share on other sites More sharing options...
rustybill1960 Posted September 25, 2010 Share Posted September 25, 2010 Nice work Man i like where your going with this build Sharp! Thank You for sharing Later Russ Quote Link to comment Share on other sites More sharing options...
exesivefire Posted September 30, 2010 Author Share Posted September 30, 2010 Main chassis parts are drying, should have more to show tomorrow. I forgot what a pain in the rear the front suspension can be Quote Link to comment Share on other sites More sharing options...
davyou5 Posted September 30, 2010 Share Posted September 30, 2010 Welcome back to the Hobby, and welcome back to the forum, I like were your going with this keep it up! Quote Link to comment Share on other sites More sharing options...
MADmodelDOCTOR Posted September 30, 2010 Share Posted September 30, 2010 Welcome and great work! It's a neat looking project. later Quote Link to comment Share on other sites More sharing options...
exesivefire Posted September 30, 2010 Author Share Posted September 30, 2010 (edited) making progress on the chassis Edited September 30, 2010 by exesivefire Quote Link to comment Share on other sites More sharing options...
BigEdsGarage Posted October 1, 2010 Share Posted October 1, 2010 I was in a similar situation and after many years of being away from it I have started to enjoy the hobby again. I think you are going to find you will probably enjoy it more now that you are older. The truck looks very cool so far. Great job on all the work done so far. Is that the Lindberg kit suspension? Quote Link to comment Share on other sites More sharing options...
exesivefire Posted October 1, 2010 Author Share Posted October 1, 2010 I was in a similar situation and after many years of being away from it I have started to enjoy the hobby again. I think you are going to find you will probably enjoy it more now that you are older. The truck looks very cool so far. Great job on all the work done so far. Is that the Lindberg kit suspension? the front is from a revell 32 kit, the rear is the lindburg, but I had to shorten the driveshaft and wishbone to fit the engine/ trans I chose Quote Link to comment Share on other sites More sharing options...
exesivefire Posted October 1, 2010 Author Share Posted October 1, 2010 another teaser/update Quote Link to comment Share on other sites More sharing options...
Zhu Posted October 1, 2010 Share Posted October 1, 2010 Cool? It’s sub zero!! Lovin it Quote Link to comment Share on other sites More sharing options...
Alfa Posted October 1, 2010 Share Posted October 1, 2010 Andy Welcome back . That truck rocks old school. Quote Link to comment Share on other sites More sharing options...
MikeMc Posted October 1, 2010 Share Posted October 1, 2010 Way Kool!!!!!! :rolleyes: Quote Link to comment Share on other sites More sharing options...
exesivefire Posted October 2, 2010 Author Share Posted October 2, 2010 thanks guys, got the headlights installed tonight. Part of me wishes I left them off ( I like the look without them ) but they look good either way. no pics, will try and update again tomorrow Quote Link to comment Share on other sites More sharing options...
David G. Posted October 13, 2010 Share Posted October 13, 2010 You've got some excellent stuff going on here, can't wait to see more! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.