Dr. Cranky Posted April 6, 2012 Posted April 6, 2012 Outstanding, Rom. Love the paint, and you have a million details to pour over in this build. Congratulations.
Dyno Davo Posted April 6, 2012 Posted April 6, 2012 An absolute masterpiece Rom and its been exciting to follow this amazing build.
Romell R Posted April 10, 2012 Author Posted April 10, 2012 Thanks Virgil and David I appreciate your compliments and thanks for following along
Kustom Rodder Posted April 10, 2012 Posted April 10, 2012 Wow what a build looks great in the sunshine fanastic job!
ybsluos Posted July 10, 2012 Posted July 10, 2012 hey thx Davin! Hey Fellas I decieded to cut my lenco tranny into pieces so i could detail it, but in do so It seemed to me that i could make a better tranny altogether. At first I planned to make it from styrene but a quick trip to my work shop and i found out I didnt have any left. So heres the new plan fab the entire transmission from brass! Can it be done? We'll soon see. Enjoy! heres the resin tranny pictured after i cut it up. these are the materials i'll use to build the new tranny... four differant sizes were cut from two differant sizes of brass tube. I cut round plates which will later be shaped as the connection or mounting plates for each section. (sorry its blurry) here im beginning to solder the end caps on, I think my soldering gun is poopin out on me............. I'll have more for you soon , gotta go buy a new soldering gun so i can continue.........cya soon. Just found this thread on your build Rom. Amazing work Brother! Yeah, I don't blame you for doing your own tranny. I mastered that one for Terry back in 1998 or so and I knew it was rough around the edges plus I always knew the bellhousing was incorrect for a more current Lenco. Just wanted to give folks something to start with. Terry at Flashpoint has encouraged me to do a new piece but I have been lollygagging. I'm hoping if I fiddle around long enough Terry or Paul Rowe will master one up! Either of their's would blow mine away anyhow! But I think we all wish we had a copy of the one you did for this project! You are a fantastic builder man, keep it up!-Mark
Romell R Posted July 11, 2012 Author Posted July 11, 2012 Hey Thanks Mark for the compliment and thanks for giving us something to work with. *edited*
PARTSMARTY Posted July 15, 2012 Posted July 15, 2012 ORIGINALITY AND THINKING OUTSIDE THE BOX HELP TO BUILD SOME OF THE COOLEST MODELS AND YOU NAILED IT MAN-CONGRATULATIONS AND I'M LOOKING FORWARD TO MORE.ALSO SOME OF YOUR OWN CREATIVE WORK HELPS OTHERS TO LEARN AND GIVE THEM IDEAS-YOU NEVER STOP LEARNING---THANX
Romell R Posted July 15, 2012 Author Posted July 15, 2012 ORIGINALITY AND THINKING OUTSIDE THE BOX HELP TO BUILD SOME OF THE COOLEST MODELS AND YOU NAILED IT MAN-CONGRATULATIONS AND I'M LOOKING FORWARD TO MORE.ALSO SOME OF YOUR OWN CREATIVE WORK HELPS OTHERS TO LEARN AND GIVE THEM IDEAS-YOU NEVER STOP LEARNING---THANX Hey thanks man I just love the challange of a good build. And if my ideas can help someone else along the way then thats an extra bonus! Glad you enjoyed the ride and like you I neer stop learning.
Mr.1/16th Posted July 15, 2012 Posted July 15, 2012 W O W ! ! ! ! ! !! !! ! !!! !! ! !! !!! !! !! ! ! ! !! ! !! ! ! !!! ! !! ! !! ! AMAZING BUILD!!!!!!!!!!!!!
dimebolt Posted July 16, 2012 Posted July 16, 2012 Your Daytona is quite possibly the best build I have ever seen!!! Corey
Romell R Posted July 16, 2012 Author Posted July 16, 2012 W O W ! ! ! ! ! !! !! ! !!! !! ! !! !!! !! !! ! ! ! !! ! !! ! ! !!! ! !! ! !! ! AMAZING BUILD!!!!!!!!!!!!! Hey thanks Santiago long time no hear from you buddy how ya been
Romell R Posted July 16, 2012 Author Posted July 16, 2012 Your Daytona is quite possibly the best build I have ever seen!!! Corey lost for words Thanks
dimebolt Posted July 17, 2012 Posted July 17, 2012 You're very welcome. Your work is outstanding as far as I'm concerned. Corey
Mr.1/16th Posted July 17, 2012 Posted July 17, 2012 BEEN BUSY DRIVING ALOT OF CELBS AROUND BUT IT'S TIME TO GET BACK INTO THE CHOP SHOP WITH ALL OF THE 9 BUILDS ON MY TABLE!!!! KEEP AN EYE OUT FOR THEM REAL SOON. GREAT TO SEE YOU BUILDING TOO BROTHA!!!!
Yahshu Posted July 17, 2012 Posted July 17, 2012 Your Daytona is quite possibly the best build I have ever seen!!! Corey It is the best model I've ever seen but then again this isn't a model, IT'S A WORK OF ART!!!!
Romell R Posted July 21, 2012 Author Posted July 21, 2012 It is the best model I've ever seen but then again this isn't a model, IT'S A WORK OF ART!!!! I consider every modeller here that can open a box and put the pieces together an artist, and all our collective works make for one heck of an art collection.... Thanks for the compliment my friend
Brandriet16 Posted September 8, 2014 Posted September 8, 2014 Holy cow. I just went through the whole thread and am completely speechless. I'm compenting to bump this up for everyone who hasn't seen it. Fantastic job. Perfect craftsmanship. Absolutely unreal work. I can't even find words that give this build justice. Wow.
Romell R Posted December 9, 2015 Author Posted December 9, 2015 Wow its been a long time since i finished this and I have to admit I just went back thru this to get myself motivated to get on my new project AND IT WORKED!! I also want to bump this back to the top for a couple of my new friends to see. Good to be back in the lab
futurattraction Posted December 9, 2015 Posted December 9, 2015 (edited) It's nice to have you back, buddy. What'cha gonna do next Romell??? Edited December 9, 2015 by futurattraction
Sledsel Posted December 20, 2015 Posted December 20, 2015 That has gotta be the most insane build I have ever seen. Wow is all I can say.........
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now