Follow-up to “What would you like to see made?”

[futurattraction]

I wanted to let DirtModeler and others know that I’m working on a number of drag-oriented parts and/or packages that are available. I don’t have tons of stuff made up ahead, but hopefully enough to make a start. Several are multi-media, with an emphasis on PE, resin and SS. At this point, everything is 1/25^th scale. Most pieces were developed to supplement my Fairmont pro stock body and floor pan and are geared toward late-70s to early 80s vintage pro stock, though there are some modern pieces. I must confess this a more than a bit unnerving announcing to the world that I’ve got stuff available. I was never in the Boyscouts, but was still raised to “be prepared.” Of course it’s tough to know how to plan for demand, especially niche parts like much of my stuff. For the moment, feel free to contact me off the forum. I'll get prices, etc., to you then. I’m working on my website, but I’m not quite ready to “go public” yet.

Packages include:

351C pro stock engine w/Lenco trans (current engine doesn't include motor plate). Pic was for mockup purposes.

PE Lenco lever/link tube set (pictured on my revised Lenco trans)

PE 4-link set, w/.050” SS link tubes (rough cut). These are also designed to fit the Revell Pro Sportsman kit chassis/rear end. Mockup pic of my Fairmont…

Narrowed/braced OEM-style 9-inch Ford (6 pcs) that accommodates the above 4-link. It can be purchased housing only (6 pcs), or with PE caliper brackets and rotors, and resin calipers. Pic is completely outfitted rear end

More to come...

Edited September 5, 2011 by futurattraction

[futurattraction]

Super-detail multi-media strut front end kit that consists of resin strut body/spindles, snubbers, and 4-piston calipers, PE rotors, caliper mounting brackets, mounting hardware, spring retainers, adjusting rings and steering arms; custom springs, .SS shafts and alignment pins. Still working on assembly instructions.

Holley Dominator carbs w/extra details and separate boosters. See 351C pic above

Non-Fairmont pieces include:

Resin 2x3 rectangular frame rail for a “back half” chassis, includes styrene cross members

PE Pro Mod 4-link set, with .050” SS link tubes (rough cut)

[futurattraction]

Parts that are in the process of being developed:

4-gallon style fuel cell w/PE filler ring and cap release

Multi-media coil-over shock with detail similar to struts. See rear end mockup pic

PE clutch, brake and accelerator pedal set

B&M Pro Stick – PE stick/lever with separate 2-pc cover and ball

Multi-media, modern wheelie bar sets with PE, SS tube and resin

Multi-media, 70s vintage wheelie bar sets in PE, SS tube and resin

70’s vintage Cragar SuperTrick wheels with crowned centers (masters are being developed now with MicroNitro)

14x32 slicks designed for scale 15” diameter rims (master is being developed now with Jim Littiken of MicroNitro). See above pic

[streetisneat]

This is the stuff that I like as well. How do we purchase.

[Sixx]

That is some COOL stuff Scott!!!! can't wait!!! Sixx

[streetisneat]

I'm with you Sixx. Very nice items.

[futurattraction]

I think if you just hover over my user name, you can send me a message.

[streetisneat]

Message sent, not sure if it went thru.

[futurattraction]

Don't see where it came through. E-mail me at scott@futurattraction.com

[Prostreet]

Wow, Great stuff. Nice to see more after market stuff popping up. Nice Job

[hOLMS]

These components are looking awesome Scott...may have to order something. That is, if I ever make it that far...lol. Good luck man.

[DirtModeler]

I think we'll be in good shape. The only areas we share would be the 4-link suspension mounts. Ours look sufficiently different to give the customers a choice for a different look.

The main area i'll be in will be wheels and beadlocks, and I won't be doing any resin stuff that i know of besides the wheel rims.

[futurattraction]

Fair enough, Michael. Any wheels I do will be all resin and they'll all probably be of the 70s-80s type vintage, so nothing to worry about on that end...

[stump]

WOW !!

Scott, between you and Michael, you guys are serving up some delicious entrees for us drag builders....

I'm gonna have to get back down to 1/25 scale if you's keep this kinda thing up.

Unless of course, some 1/16, or even....dare I say, 1/12 stuff rolls along.......

[futurattraction]

Thanks the comments and encouragement, guys.

[Mooneyzs]

Very Cool Stuff. Can't wait to see what else you have planned on making. I may have to pick something up from you sometime.

[camarobuilder]

I see a whole lot of parts I want! Love the 4-link, struts, carbs, and shifter housing...

Frank

[gasser59]

Gorgeous stuff for us drag enthusiasts. Looking forward to getting an order in and putting this stuff to good use. If you need help on artwork for assembly instructions, let me know as I'm an illustrator.