Scale-Master Posted September 28, 2012 Share Posted September 28, 2012 (edited) Studio 27 kit of a ’94 IMSA car that ran at Le Mans. The hood is being modified with a different styled hood louver set from what was cast into the body. When I got it, it had been started and for some reason the body was painted even though the hood louvers were not finished. So this is where this project starts for me… I soaked the body in oven cleaner, but it had very little effect on the paint. Being resin with filler (certainly on the hood, not sure about elsewhere) I decided sanding is a better option than stronger solvents or strippers to prep the majority of the body for repainting. The hood is first thing that needs to be addressed. Using chisels, files, an X-Acto knife and sanding sticks I carved the main ducts through the hood. A little polyester two part filler was used to smooth out the low spots and sharpen the edges. Edited September 28, 2012 by Scale-Master Quote Link to comment Share on other sites More sharing options...
pharr7226 Posted September 28, 2012 Share Posted September 28, 2012 Nice work on the vents. The edges look very crisp. Did the oven cleaner affect the filler? I need to strip some paint and I don't want to damage the filler under it. Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted September 28, 2012 Author Share Posted September 28, 2012 Nice work on the vents. The edges look very crisp. Did the oven cleaner affect the filler? I need to strip some paint and I don't want to damage the filler under it. I don't think it did anything to the filler. I'm pretty sure it was a catalyzed polyester type, and I am guessing it was dry for at least a year, probably more. Quote Link to comment Share on other sites More sharing options...
bryan_m Posted September 29, 2012 Share Posted September 29, 2012 nice fix on the hood! great save, it looks sooo much better now! cheers bryan Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted September 29, 2012 Author Share Posted September 29, 2012 Strips of styrene stock were utilized to build up the lips around the ducts. (I masked off the areas outside the center of the hood to protect them from primer build up and the possibility of sanding the edges of the other louvers since they were already a little “soft” from the previous layers of paint.) Once the shape of the basic ducts and lips were done I took off the tape and feather edged the primer build up with 1000 grit sand paper. The headlight covers are body/scheme colored and provided as vac-u-formed parts. They were trimmed to fit and installed. Primed with Tamiya, it is time to make the four louver panels… Quote Link to comment Share on other sites More sharing options...
beancd5 Posted September 29, 2012 Share Posted September 29, 2012 wow, I want to make some vents on a few of my cars, I havent hit that step yet tho, GREAT WORK! Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted September 30, 2012 Author Share Posted September 30, 2012 The louver panels were made with sheet styrene… Now onto prepping the body for color. Quote Link to comment Share on other sites More sharing options...
vintagedragfan Posted September 30, 2012 Share Posted September 30, 2012 hood vents came out beautiful, nice work! Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted October 1, 2012 Author Share Posted October 1, 2012 Originally I planned to shoot the white first, but after assessing the best way to apply the overall scheme I decided painting the red first would be easier. I masked on the center of the white side/nose stripe instead of painting white and then masking the thin stripe off. (It looks like the latter was the plan of the person that started this kit as you can see in the first photos I posted.) I used some old stock Testors 1103 Red enamel. Quote Link to comment Share on other sites More sharing options...
Foxer Posted October 2, 2012 Share Posted October 2, 2012 Very nice bodywork on the hood ducts. Goes to show what can be done with simple shapes. Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted October 2, 2012 Author Share Posted October 2, 2012 The areas that are to be red and white were masked off and the Testors 1111 Blue was shot. Once it is dry I will add the white to the hood (what is gray now) and the dividing strip between the red and blue. Quote Link to comment Share on other sites More sharing options...
Chas SCR Posted October 2, 2012 Share Posted October 2, 2012 Very nice Mark! I wish it was a full detail kit. Quote Link to comment Share on other sites More sharing options...
Art Laski Posted October 3, 2012 Share Posted October 3, 2012 Nice work, Mark! The hood vent tutorial is great. Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted October 3, 2012 Author Share Posted October 3, 2012 Got white? Yep… Quote Link to comment Share on other sites More sharing options...
doggie427 Posted October 6, 2012 Share Posted October 6, 2012 Beautiful work as always .The hood work is especially fine. Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted October 10, 2012 Author Share Posted October 10, 2012 And now the white border/pinstripe is done. Time to start decaling… Quote Link to comment Share on other sites More sharing options...
sjordan2 Posted October 10, 2012 Share Posted October 10, 2012 Is the pinstripe paint or tape? Quote Link to comment Share on other sites More sharing options...
severin681 Posted October 11, 2012 Share Posted October 11, 2012 wow that mod on the hood was mad impressive! Quote Link to comment Share on other sites More sharing options...
frozono Posted October 11, 2012 Share Posted October 11, 2012 (edited) Wow.....love the paint job.....waiting to see more. Edited October 11, 2012 by frozono Quote Link to comment Share on other sites More sharing options...
bryan_m Posted October 12, 2012 Share Posted October 12, 2012 lookin good!! cheers bryan Quote Link to comment Share on other sites More sharing options...
LAone Posted October 12, 2012 Share Posted October 12, 2012 Looks great mark. Nice job on those vents. Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted October 13, 2012 Author Share Posted October 13, 2012 Thanks guys! Decals and clear have been applied. Still needs some issues attended to and some details added before final assembly… Quote Link to comment Share on other sites More sharing options...
dimebolt Posted October 13, 2012 Share Posted October 13, 2012 Looks awesome man. Your 7-Caterham is one of my favorite builds still, and I first saw it years ago. Great job as always. Corey Quote Link to comment Share on other sites More sharing options...
crazyrichard Posted October 13, 2012 Share Posted October 13, 2012 stunning work , really beautifull , paint and decalling is so nice .. Quote Link to comment Share on other sites More sharing options...
Hawk312 Posted October 13, 2012 Share Posted October 13, 2012 Very nice work! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.