Joker Posted January 2, 2013 Posted January 2, 2013 This is a build for an online "Tri-Five" contest on another forum..3 month dead line. I decided to build the '56 Nomad..I like Turtles Wagons. Made the bubble skirts and visor..added Lakers with shrouds..opened rear window. Shortened the front bumper apron..scribed scribed scribed the trim and doors. Cut pin head on turn signal lense black wash grill...filled hood..amber turn signals. Mimicked the hooded front head lites on the back with styrene.Built up the lower rear tail lites with clear acrylic to form a dome like the top lense then painted it clear red. Joker have a better 2013 Y'all
TooOld Posted January 2, 2013 Posted January 2, 2013 Looks good so far . I really like the hooded taillights !
Joker Posted January 2, 2013 Author Posted January 2, 2013 Thanks y'all.. I lowered the 56 tail lites to the top of the rear emblems(small bowtie and chevron). This was done to avoid a step up in the body work. A real mild peak was added to the tops of the rear fenders to mimic the front fenders.Didn't want to give them a full on frenched look..but a subtle custom touch.
H.A.K Posted January 3, 2013 Posted January 3, 2013 Hell I give up.....I haven't even started mine yet. But seein that......I say you win. LoL. LOVE IT.
slammedi'am Posted January 3, 2013 Posted January 3, 2013 Looks good man...Cant wait to see it finished
rustybill1960 Posted January 3, 2013 Posted January 3, 2013 Super! I really like Your work on the build so far! Thank You for sharing I will be watching this one Later Russ
zelkam Posted January 6, 2013 Posted January 6, 2013 (edited) hummm I love this project, I like the idea of ​​cap and taillights. for the grid, I had to open sand, it gives a more realistic side (look my 56 nomad) Edited January 6, 2013 by zelkam
Joker Posted January 6, 2013 Author Posted January 6, 2013 hummm I love this project, I like the idea of ​​cap and taillights. for the grid, I had to open sand, it gives a more realistic side (look my 56 nomad) I did see your '56 Nomad and the Phantom '56 El Camino...very creative work. The grill work with the fishing line and half round styrene is stunning. I will take your advice and thin the grill ....wish me luck. Joker
Joker Posted January 6, 2013 Author Posted January 6, 2013 Got half done on the grill..nervous work with the Dremel...hahaha Gotta admit..it does look nicer. Thanks for the advice Jean J
Nash Posted January 8, 2013 Posted January 8, 2013 Hello Joker Good job !! I like the way you opened up the grill...... nice to see your dedication to scratchbuilding, I'm looking forward to the next development. Cheers Nash
AzTom Posted January 8, 2013 Posted January 8, 2013 Looks great. The tail lights are real nice and the grill opened up makes a huge difference.
Gluhead Posted January 9, 2013 Posted January 9, 2013 Lookin' great, Joker! Quick question - What do you use to blacken your panel lines?
Joker Posted January 9, 2013 Author Posted January 9, 2013 Lookin' great, Joker! Quick question - What do you use to blacken your panel lines? A black wash made by Citadel..used mainly on WarHammer game warriors. (found at a small gamers shop near Chesterfield Hobbies...my regular LHS) Lay it on thick ..no need to thin it..then the magic happens as it dries. Also used it on the rear tail lites.Cleans up with a damp Q-tip or a wet toothpick. Small update...sunken arial
JasonFL Posted January 9, 2013 Posted January 9, 2013 Very cool build James, as always. I really love what you did with those tail lights and grill. I also like that antenna, I was curious if you had any photos of how you did that? Can't wait to see how you finish this one up.
Joker Posted January 10, 2013 Author Posted January 10, 2013 (edited) Very cool build James, as always. I really love what you did with those tail lights and grill. I also like that antenna, I was curious if you had any photos of how you did that? Can't wait to see how you finish this one up. Sorry..I didn't take any pixs...but it's easy. First I drew the tear drop with a pencil on the factory location. Then with a 80 gauge drill bit ..I made the hole on the fender. Then I glued a small piece of tree sprue to the inside of the fender.. right under the hole(important step..it holds the wire)... this will give it a "sunken" look... then stretched sprue was glued to the outside in the teardrop shape. I lightly brushed the stretched sprue with glue to soften the edges. It gives it a raised profile...most of it gets sanded anyway. Then it was given a light sanding..to finish ..a smaller drill bit was used to install a 30 gauge wire antenna. Shapes can be as simple as a diamond , heart or dual teardrops. It is easy to see the glued piece of sprue added to the inside of the fender from the bottom. Like I said before ..most of the stretched sprue on the outside is soften up with a light coat of glue..then sanded. Edited January 10, 2013 by Joker
JasonFL Posted January 11, 2013 Posted January 11, 2013 Sorry..I didn't take any pixs...but it's easy. First I drew the tear drop with a pencil on the factory location. Then with a 80 gauge drill bit ..I made the hole on the fender. Then I glued a small piece of tree sprue to the inside of the fender.. right under the hole(important step..it holds the wire)... this will give it a "sunken" look... then stretched sprue was glued to the outside in the teardrop shape. I lightly brushed the stretched sprue with glue to soften the edges. It gives it a raised profile...most of it gets sanded anyway. Then it was given a light sanding..to finish ..a smaller drill bit was used to install a 30 gauge wire antenna. [img=http://images108.fotki.com/v1623/photos/9/1617219/11446487/RSCN2514-vi.jpg] Shapes can be as simple as a diamond , heart or dual teardrops. It is easy to see the glued piece of sprue added to the inside of the fender from the bottom. Like I said before ..most of the stretched sprue on the outside is soften up with a light coat of glue..then sanded. Thanks James, i appreciate you explaining that to me. I'm not sure my skill level is there yet tho. The two things I wasn't sure about is when you said "Then I glued a small piece of tree sprue to the inside of the fender..right under the hole". Did you just glue a round piece on the inside and drill through that to hold the antenna? Seems like it would be difficult to drill through that without it poppin back off. The other thing I was curious about is how you stretched the sprue that small into that little tear drop shape? Sorry for all the questions, just trying to understand how you did it. Such a cool modification, I would like to attempt it one day, maybe on the Merc I got on the bench.
Joker Posted January 12, 2013 Author Posted January 12, 2013 Did you just glue a round piece on the inside and drill through that to hold the antenna? {Yes}Seems like it would be difficult to drill through that without it poppin back off.{Let the drill do the work..light pressure...I use Tenax ..dries quick and strong} The other thing I was curious about is how you stretched the sprue that small into that little tear drop shape? {I use a small Votive candle..even a birthday candle will work..pass the left over sprue and practice stretching it into different diameters ..practice makes perfect..don't heat to blacken ..just to the softening point...go slowly ..Be very carefull }Sorry for all the questions,{ I take advice and ask questions myself..just glad to help} just trying to understand how you did it.{ practice practice practice}Such a cool modification,{Thanks Jason} I would like to attempt it one day, maybe on the Merc I got on the bench.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now