Jump to content
Model Cars Magazine Forum

Recommended Posts

Here are a couple more kandy pattern jobs that I have been messing with. First is a AMT Prestige 63 Impala. This car was a quick job. About 24 hours from bare plastic to paint done, ready for foil and clear. It is kandy HOK Root Beer brown.

rootbeer1_zpsb132453b.png

rootbeer2_zpsffee085a.png

The next one is a 37 Chevy Master Deluxe resin body. It is all HOK kandy apple red with red nail polish for the body color.

37Chevy10_zps24dfb6ce.png

37Chevy12_zpsf034a7d7.png

37Chevy13_zpsb0034f7b.png

37Chevy22_zps60c22d36.png

37Chevy24_zpsa468b360.png

Link to post
Share on other sites

Chris, that is some spectacular work! Let me pick your brain a bit, how do you get the masking tape stripes so fine? I've always wanted to try one of these paint jobs, but just haven't figured out how you guys get the tape so thin, or how you don't get any paint bleed-through on such fine lines.

Link to post
Share on other sites

Take 2 blades and tape them together. The closer then tips of the blades are, the thinner the lines are. Then cut strips from a piece of 2 inch wide masking tape. I have a "how to" thread on Layitlow.com. Look in the model section and its on the first page.

tape_zpsd60158b5.png



Thanks for the compliments!

Link to post
Share on other sites

Thanks for the info Chris, Ir eally appreciate it! I've got an old AMT '64 Impala around here that I'm going to use for practice!

Perfect car to start with! Thanks everyone. I get a lot of questions on how I do certain things. I love helping out other builders, because it is my way of giving back to the hobby. I am going to try to get some of the cars out to some shows this year.

Link to post
Share on other sites

Thanks alot! Yea I just take my time taping, just run a center line to go off of, and go from there. The internet is a good place to go to get some ideas on how to lay out your lines. Just take your time, and have fun with it!

Link to post
Share on other sites

Thanks for the info and the link to this tutorial guys. Beautiful work. I am looking forward to trying this on a couple of builds- Especially my 41 Chevy lowrider pickup I have in mind.

Thanks again

Later-

Edited by Modlbldr
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...