Ira Posted December 31, 2013 Author Posted December 31, 2013 WALLS & FLOORBOARD TOO! I Cut & Fit the Front Wall Sections and glued them in. The Floorboard was also done with sheet plastic. The Rear Floor was raised to hold the rear seat at the right position. More Coming...
Ira Posted December 31, 2013 Author Posted December 31, 2013 Ira... Have you thought about making a bubble top for you Jetsonmobile? Thanks John! Yes, I am thinking about it...
Ira Posted December 31, 2013 Author Posted December 31, 2013 DOOR PANELS! Using a Cut-Off Wheel and a Dremel Tool, I cut the Door Panels from 2 Corvette Interiors. Here are the Panels after a little cleaning up... Here are the right side Door Panels, cut to fit in the interior. This is a mock-up showing the right side Door Panels in place. More Coming...
Danno Posted December 31, 2013 Posted December 31, 2013 Hey, Ira! Is it too late to swap the rear door panels from side to side? You could carry the same arm rest line through from front to back: Like this: \_ _ __ _ _/ Instead of like you have it: \_ _ _\_ _ _ Might flow better. Just a thought, says the rank amateur to the creative genius.
Harry P. Posted December 31, 2013 Posted December 31, 2013 Hey, Ira! Is it too late to swap the rear door panels from side to side? You could carry the same arm rest line through from front to back: Like this: \_ _ __ _ _/ Instead of like you have it: \_ _ _\_ _ _ Might flow better. Just a thought, says the rank amateur to the creative genius. The diagonal edges of the panels won't line up if you flip them. They won't be / /... they'd be / \
Harry P. Posted December 31, 2013 Posted December 31, 2013 Hey Ira... I know it's not the subject of this topic, but I love the way you made the "light beam" the attachment point for the UFO to the house. Very clever!
DrKerry Posted January 1, 2014 Posted January 1, 2014 Flip the panels side to side and reverse you'll get that angle..... Passenger to driver side and vice versa.....
Ira Posted January 1, 2014 Author Posted January 1, 2014 OMG. Here it comes . . . {Look out, folks! He's hacking plastic again.} . . . Yep, I'm cutting up the plastic again...
Ira Posted January 1, 2014 Author Posted January 1, 2014 So, when does the X-Wing fighter tie into this???? And people say I'm not right.... Geesh!!!! Later...
DrKerry Posted January 1, 2014 Posted January 1, 2014 Later... Cannot wait Ira, this is a kool build you got's going on....
Ira Posted January 1, 2014 Author Posted January 1, 2014 (edited) Maybe this will help? The model was constructed by Chris Bennett and entered into the Portland Rod & Custom model car show 2006. The title of the piece is "2063 Vette" and the scale is large. Not exactly sure if it was as large as 1/8th tho. More likely 1/12th or 1/16th. The door does not close and the car hovers over the stand seemingly by some sort of repulsers. (Actually supported by the mechanic's arm and his wrench.) Lighting in the building was really bad and don't do the model justice. Chris took "Best Paint" and 1st in "Diorama". I'd have voted it best in show if I was a judge, it was that cool. Thanks Jairus! Yes, I've seen this one, it is Great. Last year at the NNL West, I saw a 24th scale Flying 53 Corvette supported by a Car Hop, Fun Stuff... Edited January 1, 2014 by Ira
Ira Posted January 1, 2014 Author Posted January 1, 2014 Hey, Ira! Is it too late to swap the rear door panels from side to side? You could carry the same arm rest line through from front to back: Like this: \_ _ __ _ _/ Instead of like you have it: \_ _ _\_ _ _ Might flow better. Just a thought, says the rank amateur to the creative genius. Thanks for the suggestion! Probably to late though...
Ira Posted January 1, 2014 Author Posted January 1, 2014 WERE-RABBIT DASH! I found this Futuristic Dashboard in the 12th scale Wallace & Grommit Were-Rabbit Truck Kit... I cut down the sides to fit and removed the Dash-Shelf to increase legroom. Here it is glued in place! More Coming...
Ira Posted January 1, 2014 Author Posted January 1, 2014 Hey Ira... I know it's not the subject of this topic, but I love the way you made the "light beam" the attachment point for the UFO to the house. Very clever! Thanks Harry! I might make something like that for the Vette Jet...
Ira Posted January 2, 2014 Author Posted January 2, 2014 Cannot wait Ira, this is a kool build you got's going on.... Thank You Dr.!
midengineaddict Posted January 2, 2014 Posted January 2, 2014 (edited) Can't wait to see the wing's on it. Edited January 2, 2014 by midengineaddict
Ira Posted January 4, 2014 Author Posted January 4, 2014 THE VENTS ARE BACK! There are 8 Vents on the 4 side panels I removed from the 2 Vette Bodies. I am going to fit them into the Vette Jet Body. I used a Cut-Off Wheel in a Dremel Tool to cut out the Vents. Then I cleaned up the cuts with a sanding board. Next I traced the shapes of the Vents on to the rear of the Body. More Coming...
DrKerry Posted January 4, 2014 Posted January 4, 2014 Thank you Ira, for showing us a path into your creative mind and seeing how you put it all together!!!!
Ira Posted January 5, 2014 Author Posted January 5, 2014 NEW REAR VENTS! I cut along the Marked Lines of the top Vents with a cut-off wheel. Then I cut out the area for the lower Vents. Here are the Vents glued in place. I also applied Squadron Putty to the rough areas. Here are the Vents after I sanded the area down a little bit. More Coming...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now