hooterville75 Posted October 1, 2012 Share Posted October 1, 2012 With the few parts that I've stripped chrome from Bleach has worked perfectly for me in a very short amount of time. Then again the only parts Ive stripped were wheels. Quote Link to comment Share on other sites More sharing options...
Burwell555 Posted October 12, 2012 Share Posted October 12, 2012 Has anybody ever heard of/tried castrol super clean degreaser? Before I kinda dwindled out of the hobby for a while it seemed to be great as far as dipping and soaking bodies over night. I know it works well for base clear, model master and the Boyd customs type paints as I had stripped those. But what some if the other 20plus year old paint was I have no idea as I received somebody's old collection and that was all I knew of it lol Quote Link to comment Share on other sites More sharing options...
Fat Brian Posted October 12, 2012 Share Posted October 12, 2012 Yep, Super Clean does a very good job on enamels and some soft laquers. Quote Link to comment Share on other sites More sharing options...
martinfan5 Posted October 15, 2012 Share Posted October 15, 2012 It doesn't seem to be working all that well on model master lacquers, but it works great on urethane and acrylics. Give it time, it will work, try sanding a lilttle bit before, I use 91% to strip MM lacquer all the time, and it has worked all the time, just the time it takes does vary a little bit Quote Link to comment Share on other sites More sharing options...
eizzle Posted October 15, 2012 Share Posted October 15, 2012 (edited) Sounds good, usually when I have to strip them its because I totally screwed up the clearcoat, I was amazed at how good it worked on urethanes! I'll have to remember that the next time I drop a hood on the floor Edited October 15, 2012 by eizzle Quote Link to comment Share on other sites More sharing options...
Clemi Posted December 26, 2012 Share Posted December 26, 2012 Here in germany, I use Methoxypropanol PM (also known as Dowanol) for paint stripping. http://www.kremer-pigmente.com/de/product.html?info=7124 I don't know if you get it in US, but it works really easy. I do the painted plastic parts in a box, do a bit of Dowanol on the bottom of the box, pull the cover on it and after an hour, the paint is completely removed. Quote Link to comment Share on other sites More sharing options...
Guest G Holding Posted January 2, 2013 Share Posted January 2, 2013 Just tried a "new" idea from an old timer...Acetone and water. YES I said acetone and water. Mix 2 oz water to 1 pint acetone. If you do not add water the acetone will melt plastic! Immerse , let sit 10 minutes and with a pair of nitril gloves use a stiff brush to flush the surface and watch the paint slide off. This works on all paints, and both resin and styrene . Quote Link to comment Share on other sites More sharing options...
Guest G Holding Posted January 2, 2013 Share Posted January 2, 2013 Here in germany, I use Methoxypropanol PM (also known as Dowanol) for paint stripping. http://www.kremer-pigmente.com/de/product.html?info=7124 I don't know if you get it in US, but it works really easy. I do the painted plastic parts in a box, do a bit of Dowanol on the bottom of the box, pull the cover on it and after an hour, the paint is completely removed. No not available.....but was priced at $120.00 US for 1 ml....10 ml bottle was $600.00 Quote Link to comment Share on other sites More sharing options...
ironhyde2483 Posted February 19, 2013 Share Posted February 19, 2013 Just started this about 15 mins ago with 91% alchol Quote Link to comment Share on other sites More sharing options...
ironhyde2483 Posted February 19, 2013 Share Posted February 19, 2013 After 30 min ready to sand and prime again Quote Link to comment Share on other sites More sharing options...
ironhyde2483 Posted February 19, 2013 Share Posted February 19, 2013 Also if there still just a lil bit paint just dip rag in the dip and wipe away I got another one in the same dip working now then have one more after so we see how good it is so far o good Quote Link to comment Share on other sites More sharing options...
crazyjim Posted February 19, 2013 Share Posted February 19, 2013 What kind of paint did you strip and how long was it on the body? Quote Link to comment Share on other sites More sharing options...
ironhyde2483 Posted February 19, 2013 Share Posted February 19, 2013 Clear coat was rustoleum enamel never again base was modelmasters laquers and primer was cheap stuff the its been cured for about 4 days the other one in now been cured for over a month all laquer paints and clear it's about ready to come out now Quote Link to comment Share on other sites More sharing options...
LoneWolf15 Posted February 19, 2013 Share Posted February 19, 2013 A new discovery for me .... As usual , more by accident then design . I sat a painted body , Testors enamel & clear , just for a moment , in Bleche White to strip the wax off it . Yep ! Forgot about it , went about painting the other prepped bodies that day . Went down to the shop the next morning , remembered the body , opened the container , whoops , body was stripped . The paint sloughed off , simply by drawing a finger down the side of the body . Lesson learned , just have to re prep and re paint the body . Now I know , Bleche White acts as a paint stripper also ! Quote Link to comment Share on other sites More sharing options...
antiliers Posted March 16, 2013 Share Posted March 16, 2013 Im not sure if this was already posted but if anybody else has access to glycol ether DPM it seems to be the chemical in dot3 that works to strip the paint I work in a chemical/aerosol plant and not only can I get the raw material but I can extract it from the dot3 as well. It works wonderfully. There is a company called lab supply that as far as I can tell anybody can order small amounts of almost any chemical. Now don't order certain combos cause obviously the fbi and or home land will be banging on your door. I hope this helps you guys out. OH IF YOU DO GET ANY TYPE OF GLYCOL ETHER WEAR GLOVES AND KEEP YOUR PEEPERS COVERED AS WELL certain types can realy mess you up Quote Link to comment Share on other sites More sharing options...
MikeyB08 Posted March 23, 2013 Share Posted March 23, 2013 On Facebook, a page names ScaleTunedCustomz posted this picture of the Integra they are working on. To me, this is an ingenious idea. Figured I would post it here. They are using an old Revell Display case turned upside down. Quote Link to comment Share on other sites More sharing options...
Mooneyzs Posted March 23, 2013 Share Posted March 23, 2013 Hey James.... here is a tub I bought at walmart that I use for the purple pond...but using an old display case works great too. Quote Link to comment Share on other sites More sharing options...
Ridge Rider Posted March 23, 2013 Share Posted March 23, 2013 Nice idea, I like the clear look to see the progress. I have a non clear tub but can do up to 3 at a time. That sounds bad , but when inspiration strikes and zero planning is involved it comes in handy. Some can relate. But I might have to find a clear tub, I like that . Thanks Quote Link to comment Share on other sites More sharing options...
MikeyB08 Posted March 23, 2013 Share Posted March 23, 2013 (edited) Awesome!! Thanks for sharing Chris. I've never stripped a model of paint. Just might be doing it soon just to try this stuff out. Edited March 23, 2013 by MikeyB08 Quote Link to comment Share on other sites More sharing options...
hooterville75 Posted March 25, 2013 Share Posted March 25, 2013 Hey James.... here is a tub I bought at walmart that I use for the purple pond...but using an old display case works great too. lol I use the exact same tub basically purchased at the Dollar General for a buck. Then went to Walmart and got Purple Power (Walmarts brand of Super Clean) for $5 and filled the tub up. Purple pond for $6 lol. Quote Link to comment Share on other sites More sharing options...
dantewallace Posted April 3, 2013 Share Posted April 3, 2013 Anyone here tried Denatured Alcohol? I have a few cans in the shop and am going to do some testing,see what happens. Quote Link to comment Share on other sites More sharing options...
VW Dave Posted April 3, 2013 Share Posted April 3, 2013 I've been using upside-down AMT showcases for about 10 years now, mostly because they're stackable; I have 2 in almost constant use with different strippers in them(CSC and ScaleCoat) depending on the job at hand. Quote Link to comment Share on other sites More sharing options...
Guest G Holding Posted April 3, 2013 Share Posted April 3, 2013 Just tried a "new" idea from an old timer...Acetone and water. YES I said acetone and water. Mix 2 oz water to 1 pint acetone. If you do not add water the acetone will melt plastic! Immerse , let sit 10 minutes and with a pair of nitril gloves use a stiff brush to flush the surface and watch the paint slide off. This works on all paints, and both resin and styrene . Bill you are a genius !! this removed everything, including primer / filler Quote Link to comment Share on other sites More sharing options...
Zarana-X Posted April 3, 2013 Share Posted April 3, 2013 I was using brake fluid with good results. Mostly because I could get used fluid for free, but I recently tried Simple Green concentrate with equal or better results. The plus side is it doesn't irritate your skin, and smells much better. It also seems to work safely on other types of plastic. I've experimented on some action figures, Lego and a few other things. Brake fluid did a number on some of them. Quote Link to comment Share on other sites More sharing options...
Raskoraz Posted April 16, 2013 Share Posted April 16, 2013 (edited) I tried removing some lacquer paint from an old body project of mine. I used DOT4 brake fluid, with 50% success. There is still a lot of excess paint regardless of how hard I scrub. Any other suggestions? Also what could I use to remove Testors enamel? Edited April 16, 2013 by Raskoraz Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.