Belugawrx Posted May 24, 2014 Author Posted May 24, 2014 Mixed up some Milliput to anchor the body side hinge,... Drying right now Got a little over zealous on the intake carve, had to build it back in,... Q's C's + C's welcome Cheers
Belugawrx Posted June 16, 2014 Author Posted June 16, 2014 OK this finally got colour,... After a coat of white over grey primer sealer.. Whattya think? Hood black? or just the lower line thnx for comments Cheers
Modlbldr Posted June 17, 2014 Posted June 17, 2014 Beautiful color. What is it? I am working on the 04 RSX and want to paint it a similar color. I have some nail polish to try but I like the shade of yours. I'm not sure if I'd paint the hood black or not. You have done some fantastic work on this. Later-
flo9mr Posted June 17, 2014 Posted June 17, 2014 I'd say if you do the lower body blackbleave the hood body color
Belugawrx Posted June 18, 2014 Author Posted June 18, 2014 Tom. Ed, Ken .... Thnx Lower Black stripe , only,... I agree Cheers
Belugawrx Posted June 24, 2014 Author Posted June 24, 2014 (edited) Black on Yellow It does need a bit of touch up Rattle can over Tamiya mask... Not great but ... Coming right along Gotta CRISP those lines....see you in a bit Cheers Edited June 24, 2014 by Belugawrx
Belugawrx Posted February 19, 2015 Author Posted February 19, 2015 (edited) Here's another one back from the dead,...or stalled,.. I wasn't happy with the black stripe on the lower body,...tried sanding it out,..didn't clear it before the black,.. couldn't strip it for fear of loosing all the bondo/squadron white filler I had put on it so,.... Hit it one more time with a close yellow Acrylic,...and, ok it needs sanding and ,....yeah maybe one more coat,...but it's gettin' there spent some time doing interior ...stock....for some reason AMT/ERTL had two clocks? molded into the GPS driver interface. So I installed a piece of pkg. plastic,Tamiya smoked into the opening screen,..? Gauges are cutouts from Detail Master Tach parts,..Cleared with Tamiya Clear gloss and washed with Tamiya clear red,.. Engine bay still needs work,... Had to sand some bolt heads down to close the hood,.... Got the undercarraige close to done, and wheel/tires mounted... Had to cut off the kit spindles and drill for wire to take tube to take Pegs,.........yada .... OMG that was touch and go for abit Anyway,..trying to clear the bench, and this is just another step (baby) Thanks for looking and of course Q, C,+ C's are welcome Cheers Edited February 19, 2015 by Belugawrx
Belugawrx Posted February 19, 2015 Author Posted February 19, 2015 And , I just noticed thanks to digipho I have the mirror upside down ,..on the wrong side,.....ok, back at 'er
slusher Posted February 19, 2015 Posted February 19, 2015 Looks fantastic in yellow. Going to leave it all yellow? I would
Belugawrx Posted February 19, 2015 Author Posted February 19, 2015 Yep Another coat, I think, and then clear it. I do have a bit of gold fine metal flake I'm going to try on a spoon first Update tamara Thnx Carl Cheers
DeeCee Posted February 19, 2015 Posted February 19, 2015 That looks way better with out the black stripe i think, looking pretty good i think.
Belugawrx Posted February 20, 2015 Author Posted February 20, 2015 Thanks Dale I tried the gold,...Nope Finished sanding it 1000 - 2000 wet going into the booth for another shot of the yellow,... Then Future I'll be back Cheers
Belugawrx Posted February 24, 2015 Author Posted February 24, 2015 Still on this one,... Haven't hit the booth yet, but... got some work done on the lenses, and the glass Interior , almost ready,.... so just the body left to spray,,.... I'll get back to ya Cheers
Belugawrx Posted February 27, 2015 Author Posted February 27, 2015 Got a bit closer to the end of this one Seats mettalic black backs and Testors acrylicOrange and then some Testors Dullcote Seatbelts from ribbon,... Wang's ( ) 1/16"' white, coloured with Tamiya clear blue. Buckles are pop can alum. and cinches are wire. Bunch of rod and sprue slices Thanks for lookin' Q, C + C's welcome Cheers
ferrari87 Posted February 27, 2015 Posted February 27, 2015 This is looking great! I really like the yellow and those seats came out saweeet!
Belugawrx Posted December 4, 2015 Author Posted December 4, 2015 Ok Taking a cue from Ryan S. I took this back out of the drawer and finished it,. sent it to "Under Glass"
mod3l Lover Posted December 4, 2015 Posted December 4, 2015 That is one cool 350Z! I never do kits likethat because I don't know anything about thereal cars. But I like to look at them! David S.
Belugawrx Posted December 4, 2015 Author Posted December 4, 2015 (edited) That is one cool 350Z! I never do kits likethat because I don't know anything about thereal cars. But I like to look at them! David S.Zactly...David,.... Thnx my builds aren't / have never been, anywhere near factory correct,...I build stuff that to my eye looks cool to me...Cheers Edited December 4, 2015 by Belugawrx
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now