Pictures of Chevy I6 Fisher dual plug cylinder heads?

[Mattblack]

Thanks Bill.

I won't be getting too bogged down on this (Ha!), just want it to be 'something like' using the kit parts.

 

[Mattblack]

On 11/23/2024 at 4:03 AM, NOBLNG said:

A little late, but I did find one picture of the engine with the 12 terminal cap…but I only see six plug wires. I don’t know what’s up with that?

 

I know I said I wasn't going to get bogged down, but...

I was going to remove the moulded in stock fuel pump on the block, but looking at this photo it seems it's still in place as a lift pump for the belt-driven injection pump?

[NOBLNG]

46 minutes ago, Mattblack said:

I know I said I wasn't going to get bogged down, but...

I was going to remove the moulded in stock fuel pump on the block, but looking at this photo it seems it's still in place as a lift pump for the belt-driven injection pump?

I don’t know how it is supposed to work.🤷‍♂️

[NOBLNG]

Here is another picture I found online. Could those be the dual plug heads standing up on the right, or are they for a different engine? Edit: those cannot be the fisher heads….if those are 12 spark plug holes they’d be under the valve covers.🤔

Edited October 15 by NOBLNG

[Ace-Garageguy]

2 hours ago, Mattblack said:

I know I said I wasn't going to get bogged down, but...

I was going to remove the moulded in stock fuel pump on the block, but looking at this photo it seems it's still in place as a lift pump for the belt-driven injection pump?

That photo has three one-barrel downdraft carbs, not fuel injection.

Edited October 15 by Ace-Garageguy
punctiliousness

[Ace-Garageguy]

1 hour ago, NOBLNG said:

Here is another picture I found online. Could those be the dual plug heads standing up on the right, or are they for a different engine? Edit: those cannot be the fisher heads….if those are 12 spark plug holes they’d be under the valve covers.

I'm going to refrain from comment on that very interesting photo until I actually have good info.  

[Ace-Garageguy]

Here's one for youse fellers who might want to build the ultimate what-if stovebolt 6...a Wayne DOHC head. It may or may not have ever run.

 

[Mattblack]

Ah, should have spotted that. I was thinking all the 'Fisher' heads used injection. Looks like I can shave away.

[stitchdup]

4 hours ago, Ace-Garageguy said:

Here's one for youse fellers who might want to build the ultimate what-if stovebolt 6...a Wayne DOHC head. It may or may not have ever run.

 

that twin cam version is giving me strong jag 6 vibes. must be the valve covers

[Mattblack]

Fire up the 3D printer!

[NOBLNG]

A few more pics I’ve run across. Still no dual plug heads though.😕

Edited October 17 by NOBLNG

[stitchdup]

I just tried to do a google image search for these engine and the first 6 lines of pics were this thread. one mcm thread is affecting the google algorythym

[Ace-Garageguy]

1 hour ago, stitchdup said:

...one mcm thread is affecting the google algorythym

Yup. It does that from time to time. Pretty cool, huh?