afx Posted October 6, 2014 Posted October 6, 2014 Yes exactly. I really like the 18"-19" wheels on the car that was on the picture. Those wheels would go nice on many classic Ford models,Mustang,Torino,Cobra and so on. If you decide to sell kits with no engine there are many nice options on the aftermarket. I wish there excisted any 1:24/25 scale DFV Cosworth. Great progress btw. Fujimi's Dome-O Zero kit has a very nice 1/24 scale DFV Picture here.
Bird12 Posted October 6, 2014 Posted October 6, 2014 Awesome building Jeremy. This car is one of my favorite subjects.
om617 Posted October 6, 2014 Posted October 6, 2014 Fujimi's Dome-O Zero kit has a very nice 1/24 scale DFV Picture here. Thanks for the info. I dont want to hijack this thread,but would it not be illegal to cast this engine?
afx Posted October 7, 2014 Posted October 7, 2014 Thanks for the info. I dont want to hijack this thread,but would it not be illegal to cast this engine? No, I wasn't suggesting that Jeremy cast the Fujimi engine. I was just trying to make you aware of a source for a nice DFV engine.
Jeremy Jon Posted October 7, 2014 Author Posted October 7, 2014 Thanks Tommy, JC & Mark is one of my favorite all time cars also! Looks great Jeremy. I too have noticed on several period photos that the rear wheels are slightly forward in the wheel opening on both the roadsters and the coupes. Good stuff. Thanks JC, you're right, I also have noticed that, the rear wheels are placed slightly forward within the wheel well housing, presumably for clearance of rearward movement during hard cornering or axle deflection? One more detail to help this final result look as correct as possible!
Jeremy Jon Posted October 7, 2014 Author Posted October 7, 2014 Yes exactly. I really like the 18"-19" wheels on the car that was on the picture. Those wheels would go nice on many classic Ford models,Mustang,Torino,Cobra and so on. If you decide to sell kits with no engine there are many nice options on the aftermarket. I wish there excisted any 1:24/25 scale DFV Cosworth. Great progress btw. Thanks Tommy, okay, yes I understand, and agree, I think later to cast a spare body to build a hot rod version would be great The DFV Cossie V8 engines were of course legends, I was thinking perhaps to use the DOHC Shelby Mustang engine?
Brizio Posted October 9, 2014 Posted October 9, 2014 Great job! Please keep me update with the parts.
Jeremy Jon Posted October 13, 2014 Author Posted October 13, 2014 Great job! Please keep me update with the parts. Thanks Brizio, yes parts are cast, message me back on PM for yours
jrherald420 Posted October 13, 2014 Posted October 13, 2014 Wow those parts look killer! The rims are tires are very clean and crisp, you really make resin casting look good.
slusher Posted October 13, 2014 Posted October 13, 2014 Wow those parts look killer! The rims are tires are very clean and crisp, you really make resin casting look good. I do agree with James, they look great...
om617 Posted October 13, 2014 Posted October 13, 2014 Thanks Tommy, okay, yes I understand, and agree, I think later to cast a spare body to build a hot rod version would be great The DFV Cossie V8 engines were of course legends, I was thinking perhaps to use the DOHC Shelby Mustang engine? Would be really cool with the DOCH Shelby as well. I just mention the DFV because it`s kinda excotic and would be cool in a road car. High rev and very light. My question as for what JC Reckner answered was intended to be if any know if it`s legal to cast the Fujimi engine,not that anyone should if it`s not. Great progress and quality work as always.
Jeremy Jon Posted October 14, 2014 Author Posted October 14, 2014 Thanks James, Carl & Tommy So far my learning curve for casting has been steep, but getting more confident Enclosing of inner rear fender well areas Nearly completed inner rear fender wells & rear tray area, along with fuel filler cup now an integrated part of chassis (rather than separate white metal component) Rear tray area constructed, with roll bar uprights & braces visible Modifications to rear 3/4 window, as actual car has cut-out air intake, and visible inner fender well panel extending up inside of interior
afx Posted October 15, 2014 Posted October 15, 2014 Jeremy, I really like your approach, it inspires me to take my builds further. Thanks for sharing.
Jeremy Jon Posted October 19, 2014 Author Posted October 19, 2014 Thanks JC, your builds are already "further"! Modified donor kit wheels, with additional hub mounts, for better axle attachment later
jrherald420 Posted October 19, 2014 Posted October 19, 2014 So much nicer looking than the metal parts! Have my rims made it to you yet?
rustybill1960 Posted October 19, 2014 Posted October 19, 2014 Another Gem J.J.! I really like this build say, would an AMT Cobra kit work for this conversion? Thank You for sharing Later Russ
Jeremy Jon Posted October 20, 2014 Author Posted October 20, 2014 So much nicer looking than the metal parts! Have my rims made it to you yet? Hi James Yes, sent you reply on PM, I recast those for you & are on the way back with a full set of Gunze parts recasts
Jeremy Jon Posted October 20, 2014 Author Posted October 20, 2014 Another Gem J.J.! I really like this build say, would an AMT Cobra kit work for this conversion? Thank You for sharing Later Russ Thanks Russ! How do you mean about the AMT Cobra? If you mean will these parts fit that chassis, I don't believe so, at least not without a lot of modification Looks great!!! Thanks Fabrizio! I got three sets of recast Gunze parts in resin ready & on their way to you
Jeremy Jon Posted October 21, 2014 Author Posted October 21, 2014 Been measuring the donor kit body, and as suspected it's not 1/24 scale, as Gunze has marked on packaging, but in fact 1/25 scale WB = 2286.0mm (90.0") @ 1/24 scale = 95.25mm @ 1/25 scale = 91.44mm Gunze = 91.0mm L = 4216.4mm (166.0") @ 1/24 scale = 175.7mm @ 1/25 scale = 168.7mm Gunze 167.0mm W = 1778.0mm (70.0") @ 1/24 scale = 74.1mm @ 1/25 scale = 71.1mm Gunze = 71.5mm
jrherald420 Posted October 21, 2014 Posted October 21, 2014 Hi James Yes, sent you reply on PM, I recast those for you & are on the way back with a full set of Gunze parts recasts Hmm i dont have that PM in my inbox.
vamach1 Posted October 27, 2014 Posted October 27, 2014 It's a Japanese kit - you're lucky it's not 1/28 scale.
jrherald420 Posted October 27, 2014 Posted October 27, 2014 Lol takes "lost in translation" to a whole new level!
Jeremy Jon Posted October 29, 2014 Author Posted October 29, 2014 Measuring up the donor kit components, oddly the body is undersized (is really 1/25 scale) the kit wheels are slightly over sized for 1/24 scale? So these will be left as is for our renovation into a full detail 1/24 A visual comparison between the donor Daytona Coupe body (measures as 1/25 scale) and a 1/24 S/C Cobra body, notice the difference in wheelbase measures, is about 5mm difference Okay, so decided that this is going to be constructed to proper 1/24 scale dimensions, we begin by lengthening the chassis (and slightly wider too) As the lower control arms are reattached, they are made visually correct, removing the donor kits extra bars (as shown), and mounting tabs constructed & attached to rails
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now