Jump to content
Model Cars Magazine Forum

Recommended Posts

Posted

There's photo-etched lettering available for some kits.

I've also seen some guys who'll put down BMF on the lettering BEFORE painting, then sand the paint off the raised portions and polish afterwards. Sounds like magic, but I've seen some pretty fine results.

Posted

Revell has emblem decals in many of their recent kits. I see that they included decal emblems in the newly reissued '65 Chevelle, for example.

Posted

I do it like Bill said. Only I don't sand it, I use thinner to wipe it off. If you are not really careful sanding, you'll sand through the foil. This technique has been a real God send to me. I build a lot of 50s & early 60s cars & they're generally covered in scripts. Here's a couple of examples. Steve

Posted

Also, in the Micron line of fine pointed artist's pens, they have both silver and gold, with .5mm tips! These are much finer tips than the small felt tip metallic markers, and certainly finer than any gel pens!

Art

Posted

I also use bare metal foil on my molded on script before painting. after the paint is dry to the touch, I then remove the paint from the BMF covered script with a round tooth pick dipped in Lacquer thinner. Works out great every time. But you do have to be careful not to over soak the tooth pick, and use gentle motion as you wipe the tip of the tooth pick across the script, and it is a little time consuming, but the results are worth it.

Posted

I do it like Bill said. Only I don't sand it, I use thinner to wipe it off. If you are not really careful sanding, you'll sand through the foil. This technique has been a real God send to me. I build a lot of 50s & early 60s cars & they're generally covered in scripts. Here's a couple of examples. Steve

Steve, do you use a QTip or a cloth with thinner or a toothpick to wipe off the paint from the scripts?

Posted

Steve, do you use a QTip or a cloth with thinner or a toothpick to wipe off the paint from the scripts?

I use those pointed Tamiya q-tips. the smallest ones. As Jim said, use your thinner very sparingly!! you can always wipe more paint off, but it's real tough to put it back on. I dip the q-tip in lacquer thinner & then lightly roll it on a cotton cloth to absorb any excess before beginning to work, & then repeat as you go. use a good magnifier & take your time & you'll get excellent results almost guaranteed! Doesn't take long to get the hang of it. Steve

Posted

When covering the letters, do you guys put down one large piece big enough to cover the entire script, or, do you cover each letter individually and cut them close? Thanks, cool idea.

Posted

When covering the letters, do you guys put down one large piece big enough to cover the entire script, or, do you cover each letter individually and cut them close? Thanks, cool idea.

You'll want to cut them as close as possible. Believe it or not, the excess foil will show through the paint, either as an edge or it can even show as a different shade of your color. A good rule of thumb is to pretend you're not going to paint over it & it will be your finished script. Plus, the less paint you put over the foil, the easier it is to clean off, so a light paint coat will definitely show the foil between the letters. Steve

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...