Foxer Posted May 30, 2015 Author Posted May 30, 2015 ,,,,,,,,but,a wench is a woman that does housework,in the literal sense,,,,,,,and a winch is what you use to get unstuck with,,,,,,just a thought You never know ... this COULD end up with a wench mounted on the front ... !
Foxer Posted May 30, 2015 Author Posted May 30, 2015 (edited) Thanks for the gracious comments everyone .. I do appreciate and they help to keep me on this. So, here's a real update .. not huge in quantity, but huge in advancing forward on this. I did some wood distressing today and my idea is going to work it seems. I planed down a piece of the outer wood at the bottom of the door with a chisel and glued a piece of .015" x .125 strip that I distressed with a knife . just taking slices at varying angles. I also did a short piece at the upper front that is rotted short of the because the underlying metal has rusted through. I also ran some fine saw teeth along all the raised wood to add some some grain. I believe this will look right once it is painted. That is my next try at this distress that's in my head. The front bodywork is pretty much done .. I'm still debating some custom tail light treatment. Edited July 7, 2017 by Foxer
Foxer Posted June 2, 2015 Author Posted June 2, 2015 Thanks so much, Dan. I remember the truck in your avatar wowed me!
Foxer Posted June 8, 2015 Author Posted June 8, 2015 (edited) I finally decided what kind of custom taillights I wanted and decided casting them with Bondic would be the quickest and simplest way. They were to fit flush to the rear corner of the wagon as can be seen in the first photo with a test casting in place ... the casting has some missing areas and has been polished on the outside. This established the method I would cast these pieces. I used tape to block the light holes for the casting and had also used tape to mark the area I removed from the body with drills, files and sandpaper. This photo shows the final taping. I used Frog tape since it had a smoother surface and one piece over the hole had the non-sticky side facing the opening and would be the surface the Bondic was put against. I also put some Vaseline against the body edges to prevent the Bondic from sticking. The next photo shows the inside before removing the tape and tail light. The taillights came out of the "mold" with the tape. Here are the final taillights placed in the body after being sanded in the edges and polished. I plan to polish further but I needed to clean up for a 1:1 electrician working around my bench tomorrow. I"m going to try polishing the inside with my Dremel, but these are pretty much ready to be painted in clear red. Edited July 7, 2017 by Foxer
Foxer Posted June 15, 2015 Author Posted June 15, 2015 (edited) Here's a shot of the taillights cast in Bondic and colored with a sharpie. I glued a .005" sheet behind the taillight holes and painted silver for this shot. Edited July 7, 2017 by Foxer
superbike-shaun Posted August 2, 2015 Posted August 2, 2015 Dude awesome, ,,,just awesome! ,,.superbike-shaun
Foxer Posted November 6, 2015 Author Posted November 6, 2015 (edited) Are you still working on this ? Never fear, all my WIP's come back to haunt you! This is still sitting right in front of my face on the bench, but I'm in a mad dash to finish a Cannonball 2015 build before the end of the month .. and really sure I WILL finish! This should return shortly after... been debating in my head whether to do the body paint or the hand painted wood grain first. Edited November 6, 2015 by Foxer
espo Posted November 6, 2015 Posted November 6, 2015 Glad to hear that this is still alive and well. I built a woody as more of a street rod/surf wagon. I painted the base color for the wood first . Then masked everything and painted the metal portion gloss black and cleared. Then did the wood detail by hand with various dry brush and clear orange and clear yellows to get the well kept look on the wood. Lots and lots of Tamiya tape and a very sharp Xacto knife. I really look forward to this build in the future.
Mr. Metallic Posted November 6, 2015 Posted November 6, 2015 Thanks for the idea on the taillights.Cool build so far
Foxer Posted November 6, 2015 Author Posted November 6, 2015 Glad to hear that this is still alive and well. I built a woody as more of a street rod/surf wagon. I painted the base color for the wood first . Then masked everything and painted the metal portion gloss black and cleared. Then did the wood detail by hand with various dry brush and clear orange and clear yellows to get the well kept look on the wood. Lots and lots of Tamiya tape and a very sharp Xacto knife. I really look forward to this build in the future. That sounds like a pretty good order of things to me. The body is going to be flat black and would be good for that to go after the basic wood color.
redneckrigger Posted November 7, 2015 Posted November 7, 2015 Awesome work you got going on here! It was great meeting you today at my shop. It is VERY clear to me that you have far more patience than I do..............heck my eyes can't even SEE half of the details you have going on! NICE!!!
Foxer Posted November 7, 2015 Author Posted November 7, 2015 Awesome work you got going on here! It was great meeting you today at my shop. It is VERY clear to me that you have far more patience than I do..............heck my eyes can't even SEE half of the details you have going on! NICE!!! Thanks, Tom. It's our "never finish" problem that comes across as patience! Now, after being surrounded by all that firepower in your shop, I'm getting the urge to go back on my "big gun" build ... but I just promised to come back to this one ... man, I need to finish something!
Foxer Posted July 7, 2017 Author Posted July 7, 2017 Patched thread for images on Fotki, but not returning to this for a bit
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now