Maindrian Pace Posted January 17, 2015 Author Share Posted January 17, 2015 X3!!! I would love to build my 1st car so much, an 86 lx 5.0 coupe. Also an aero fox era saleen "body kit" would be outstanding as well.. hint hint haha but an accurate 93 cobra would be killer too. Keep up the good work, the hatch area looks great already. The trouble with a four eye nose is not the nose itself, which is easy, but all the other things. A hood, taillights, 1/4 window louvers, complete interior, dash, steering wheel, seats, and the list goes on. The side trim would all need to be changed, and the '85-'86 GT had recessed GT lettering in the 1/4 trim ahead of the rear wheels - that detail would likely have to be 3D printed. You could use the MPC '83-'84 Mustang kits for some of the parts, but they're not detailed to modern standards and those kits are not exactly plentiful or cheap, so nobody would want to do that. So, if all of the parts, including a revised body, were mastered and offered in a resin kit, it would be at least 2-1/2 times the cost of the current conversion kit. As for a Saleen body kit, that's got possibilities, as Saleens of the era were dressed up LX's so no major changes to the body would be necessary. Sketching in the 1/4 window trim detail: -MJS Quote Link to comment Share on other sites More sharing options...
JTalmage Posted January 19, 2015 Share Posted January 19, 2015 Boy oh boy this is looking good Quote Link to comment Share on other sites More sharing options...
Danno Posted January 19, 2015 Share Posted January 19, 2015 Quote Link to comment Share on other sites More sharing options...
mustang1989 Posted January 19, 2015 Share Posted January 19, 2015 Can't wait to see the results of all this fine fabrication and combining of parts. Looking great so far Mike! Quote Link to comment Share on other sites More sharing options...
Greg Wann Posted January 20, 2015 Share Posted January 20, 2015 Looks like another fine project in progress, Mike. I still need to get caught up on the first offering. Real life stuff has kept me busy. My oldest brother passed away Sunday. I will be in Lafayette, Indiana for a few days. Quote Link to comment Share on other sites More sharing options...
my80malibu Posted January 20, 2015 Share Posted January 20, 2015 My Condolences Greg on your loss, Take care. Quote Link to comment Share on other sites More sharing options...
exesivefire Posted January 20, 2015 Share Posted January 20, 2015 Looks good! Quote Link to comment Share on other sites More sharing options...
Danno Posted January 20, 2015 Share Posted January 20, 2015 Be safe, Greg. Deepest sympathies for your loss. Quote Link to comment Share on other sites More sharing options...
slusher Posted January 20, 2015 Share Posted January 20, 2015 Looking great Mike .. Quote Link to comment Share on other sites More sharing options...
chunkypeanutbutter Posted January 20, 2015 Share Posted January 20, 2015 Man, I hate those rear windows... I hate this car! Nonetheless, I'll still be watching. Good building going down here. Quote Link to comment Share on other sites More sharing options...
Maindrian Pace Posted January 22, 2015 Author Share Posted January 22, 2015 More minutia: As an improvement over the coupe version, I added upper and lower rails to the 1/4 window frames to serve as positive glass stops, making it easier to fit the 1/4 windows. Next step is tiny amounts of filler followed by primer; then the wing and interior extension. -MJS Quote Link to comment Share on other sites More sharing options...
Devilsnake98 Posted January 22, 2015 Share Posted January 22, 2015 That's looking so good Mike, keep up the excellent work! Quote Link to comment Share on other sites More sharing options...
mustang1989 Posted January 22, 2015 Share Posted January 22, 2015 All this fabrication is great Mike and I'm really looking forward to more progress! Quote Link to comment Share on other sites More sharing options...
Unatural Posted January 26, 2015 Share Posted January 26, 2015 Woooo Hoooo...I can't wait to watch the rest of this, and then be able to have one (or two) for myself! Quote Link to comment Share on other sites More sharing options...
Maindrian Pace Posted January 29, 2015 Author Share Posted January 29, 2015 Rough bodywork done: First primer on, I always like this step because it is nice to see it in one color. Which shows all the little areas that still need to be addressed. I also need to add the trunk lock recess and lock bezel. -MJS Quote Link to comment Share on other sites More sharing options...
mustang1989 Posted January 30, 2015 Share Posted January 30, 2015 Areas that need to be addressed or not it looks great in primer!! Quote Link to comment Share on other sites More sharing options...
Danno Posted January 30, 2015 Share Posted January 30, 2015 Another home run in the making, Mike! Great work. Quote Link to comment Share on other sites More sharing options...
Devilsnake98 Posted January 30, 2015 Share Posted January 30, 2015 Looking very good mike, looks like a winner to me. Quote Link to comment Share on other sites More sharing options...
exesivefire Posted January 30, 2015 Share Posted January 30, 2015 Man this looks great Quote Link to comment Share on other sites More sharing options...
rsxse240 Posted January 31, 2015 Share Posted January 31, 2015 I was originally questioning why this was being done, then I realized how much work would be required to convert the lower half of the body of the R/M fox Cobra to an LX hatch. You're doing a great job! Do I see a resin body coming from this build in the future? Quote Link to comment Share on other sites More sharing options...
mustang1989 Posted January 31, 2015 Share Posted January 31, 2015 You're doing a great job! Do I see a resin body coming from this build in the future? We can only hope! Quote Link to comment Share on other sites More sharing options...
Maindrian Pace Posted February 1, 2015 Author Share Posted February 1, 2015 I was originally questioning why this was being done, then I realized how much work would be required to convert the lower half of the body of the R/M fox Cobra to an LX hatch. You're doing a great job! Do I see a resin body coming from this build in the future? Thanks Ken, and yes, this is the master for a resin body. It will include the rear spoiler, third brake light lens, rear interior insert, hood, glass, and front bumper. The R/M Cobra has many proportioning problems and a primitive chassis and interior by modern kit standards, so the new Revell LX is a much better starting point for a completely accurate LX hatch. And this one will be perfect before it goes off to the silicone bath. -MJS Quote Link to comment Share on other sites More sharing options...
Greg Wann Posted February 3, 2015 Share Posted February 3, 2015 Hopefully the silicone and resin Gods will be better to me on this than the other Mustang Fox body project. It took five different molds to get something worth having. I also learned that the silicone I was using was not a good choice. It is rumored at my work that the night shift job I like might be ending and I will be moved to four ten hour days. This is really going to suck for getting anything done. I also am partnering into an existing plumbing company. My hopes were to do some plumbing work during the day and work at ASU at night. Unfortunately I am severely ADHD! When was that going to leave time for resin casting? I had not really thought it through. That makes me pretty thinly spread. The shift change will really screw up my master plan if it happens. I only needed another year and a half to get the wifey through her Doctoral degree at ASU, it is cheap since I work there. Then she would get a good job and be my sugar Mamma. LOL, then the partnership would keep me busy and out of trouble after I leave ASU. Quote Link to comment Share on other sites More sharing options...
Maindrian Pace Posted February 4, 2015 Author Share Posted February 4, 2015 Greg, I think you have paid your dues with the first Fox body, this one should be smooth sailing. (I hope I didn't jinx it.) An important part of the project, the rear spoiler, was contributed by a man who reads the forum but doesn't post. We'll call him The Mysterious Mr. X. He contacted me through a member here who is also a member of our local PHX area club, the Moonlight Modelers. He pointed out, and correctly, that the spoiler from the MPC SVO Mustang was an ideal starting point for the '87-'93 LX spoiler, and graciously sent one my way. Should be a breeze. Thanks Mr. X! The bodywork is nearly complete, it just needs a little more work to define the subtle character line beneath the 1/4 windows. It's visible when the light is held a certain way. Next: Interior insert and window buck. -MJS Quote Link to comment Share on other sites More sharing options...
Danno Posted February 4, 2015 Share Posted February 4, 2015 Impressive! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.