my80malibu Posted January 16, 2015 Share Posted January 16, 2015 Hello, I am assembling one of the R&D Unique, metal Duece chassis, the Instructions do not have any detailed pictures of how the brake system, Booster, Master Cylinder, are supposed to be mounted up. I have searched for pictures, but only found some that are close matches, or not at the stage where the brake parts are installed yet. Any information would be appreciated. Thanks Gabriel Quote Link to comment Share on other sites More sharing options...
1930fordpickup Posted January 16, 2015 Share Posted January 16, 2015 Is this one of those setups were the master cylinder is mounted to the frame by the drivers feet? Quote Link to comment Share on other sites More sharing options...
my80malibu Posted January 16, 2015 Author Share Posted January 16, 2015 (edited) Yes, I suppose it is. The brake pedal looks like a factory setup, with a single stage master cylinder attached to it. The instructions indicate the Brake Pedal/ Master. Gets glued to the frame. Doing it that way interrupts the bracing from the main "spider " of the frame. The directions also say, to glue the brake booster to the bracket just right of the transmission mount. With no way of telling you exactly where to glue it. Edited January 16, 2015 by my80malibu Quote Link to comment Share on other sites More sharing options...
blunc Posted January 16, 2015 Share Posted January 16, 2015 if you know where the brake pedal is going to be mounted, that should tell you where the brake vacuum booster will be mounted and the master cylinder gets attached to the brake booster. a rod from the brake pedal pushes a valve in the brake booster which lets engine vacuum amplify the action of the brake pedal...a rod inside the brake booster is what actually makes the master cylinder do it's job. Quote Link to comment Share on other sites More sharing options...
southpier Posted January 16, 2015 Share Posted January 16, 2015 this is a later diagram, but I found it helpful (from here: http://automotiveamerican.com/category/brakes-2/ ) besides, everyone likes pictures! Quote Link to comment Share on other sites More sharing options...
Jon Haigwood Posted January 16, 2015 Share Posted January 16, 2015 kinda like this Quote Link to comment Share on other sites More sharing options...
my80malibu Posted January 16, 2015 Author Share Posted January 16, 2015 The Booster is Remote mounted. The instructions say it mounts to the bracket on the right of the transmission mount. The pedal mounts in the location shown on post #6 Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted January 22, 2015 Share Posted January 22, 2015 Love the photo reply's.Makes it a lot easier to understand what you are talking about. Thanks. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted January 22, 2015 Share Posted January 22, 2015 (edited) The Booster is Remote mounted. The instructions say it mounts to the bracket on the right of the transmission mount. The pedal mounts in the location shown on post #6 You can put a "remote mounted" booster anywhere in the car it will fit. What you have is a straight mechanical / hydraulic master cylinder hooked to the brake pedal. From there, a hydraulic line runs to another hydraulic master cylinder which is attached to the booster. The second master cylinder on the remote booster simply transfers hydraulic pressure from the pedal. Like zo. There are several variations on this theme, and they were fairly common on British and US vehicles at one time. Here's one mounted sideways in the engine bay, in a place there's room for it, far from the pedal / primary master cylinder. Edited January 22, 2015 by Ace-Garageguy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.