Ron Hamilton Posted April 27, 2013 Share Posted April 27, 2013 That is not a bad model to start with. From the description of the work you plan to do, the model should be magnificant when you are done. Quote Link to comment Share on other sites More sharing options...
espo Posted April 27, 2013 Share Posted April 27, 2013 Interesting looking old Buick. One thing that looks odd is the front end looks like a '59, and the rear fins look like a '60. The '59s had a more pointed fin and the '60s were a little shorter and rounded much like your model. Quote Link to comment Share on other sites More sharing options...
High octane Posted April 27, 2013 Share Posted April 27, 2013 The 60's headlights are all level across, while the 59 they are sloping up. The 59 is the only year the headlights and grill were of this configuration. 1958 Buick Front end 1959 Buick Front end 1960 Buick Front end That front end to me is what really makes this car. It almost looks like its mean. I think the movie Christine should of been this car. Not the "Fury" they say it was or the "Belvedere" it really was. Ya got me there as I noticed the rounded fin tips on the model and it remided me of the '60. Thanks. Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted April 27, 2013 Share Posted April 27, 2013 (edited) Here is a resin '59 Buick body over the Revell 1959 Chevy convertible chassis. First, it's too short. I lengthened it over the front wheels to get it to fit the body. Second, it's absolutely the wrong chassis. I got wacked on the board for it, and lost enthusiasm for the project. So it sits waiting for a better idea. and here's a picture of the stock AMT chassis that is under the AMT 1960 Buick. I'm not sure if this is right for the '59 Edited April 27, 2013 by Tom Geiger Quote Link to comment Share on other sites More sharing options...
HNTR Posted April 27, 2013 Author Share Posted April 27, 2013 It seems that the whole rear end has been sanded. From the panel line to the fins, their all gone. Tom, That is the same frame I am going to use. It doesn't matter if it is the right frame or not. I like accuracy but I have started many models trying to do them accurate but all that has done was left an unbuilt kit in a box. Look at all the Tom Daniels kits, Not fully accurate there is it? I am not building this one for accuracy, as much as I am building it for myself. Don't let people bring you down. It is about having fun with your hobby! Quote Link to comment Share on other sites More sharing options...
ChromeIt Posted April 27, 2013 Share Posted April 27, 2013 Tom, the chassis on my '59 is almost identical to the '60 one you show. The main difference is that the '59 had no engine, so the underside of the engine is modled right in the chassis. Also, the screw mounts are in a different location, probably to allow for the opening hood and engine on the '60. And I agree - the modified chevy chassis you did looks good - I'd just go ahead and finish it with that. Quote Link to comment Share on other sites More sharing options...
Gluhead Posted April 27, 2013 Share Posted April 27, 2013 The '59 and '60 Buicks used what GM called a K Frame. The one Tom posted as an AMT stock '60 in post #29 is essentially correct, as far as the frame itself goes. The suspension parts...well it gets a little wonky there. lol. Between the two years there were only minor differences, basically in the way the big K member was shaped in profile, to allow the designers to drop the front floors down just a tad. That all said, Tom, you gotta finish that sucker. These cars are epic and the bottom is completely unimportant in relation to the top side. Besides, GM frame designs of the era changed with the wind. If you don't want to finish it, send it to me...I'd be more than happy to have it! Quote Link to comment Share on other sites More sharing options...
HNTR Posted April 27, 2013 Author Share Posted April 27, 2013 (edited) UPDATE: Like I said, all the panel lines have been sanded off in the rear. I have taped new panel lines and began scribing. I also have the hood almost out but due to it being the main stabilizer in the front I will finish that job once all other scribing is done. I am making the panel lines a little bit wider because I want wider chrome there. lol I was also going to sharpen the "fins" in the rear but decided not to. I like the way the curves on this car are and feel the curves will look much better like on the 1960 Buick. I am still going to use the '60 Impala convertible kit as the donor for the chasis and most of the other parts, sue me. Here are the pics. Hood almost cut out Scribing lines taped off. Edited April 27, 2013 by HNTR Quote Link to comment Share on other sites More sharing options...
High octane Posted April 27, 2013 Share Posted April 27, 2013 It seems that the whole rear end has been sanded. From the panel line to the fins, their all gone. Tom, That is the same frame I am going to use. It doesn't matter if it is the right frame or not. I like accuracy but I have started many models trying to do them accurate but all that has done was left an unbuilt kit in a box. Look at all the Tom Daniels kits, Not fully accurate there is it? I am not building this one for accuracy, as much as I am building it for myself. Don't let people bring you down. It is about having fun with your hobby! Exactly, and you're not plannin' on displaying your model upside down are you? Quote Link to comment Share on other sites More sharing options...
HNTR Posted April 27, 2013 Author Share Posted April 27, 2013 Exactly, and you're not plannin' on displaying your model upside down are you? No sir, but it will still look good upside down. This is my "CUSTOM" 1959 Buick. lol Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted April 27, 2013 Share Posted April 27, 2013 Looks good to me. A competent fab shop COULD build this 1:1 on a Chevy frame too. Use what ya' got, make it work. The REAL hot-rod way. Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted April 28, 2013 Share Posted April 28, 2013 as far as the chrome trim lines on the fins, they are pretty much non existent on the original kit. I just checked the above car as well as another untouched resin body I have. Very faint lines on the top, nothing on the underside. On the 1:1 car, the top and bottom of the fin are two different pieces and are pinch welded and unfinished under the chrome. And here's a shot of the 1:1 1960 Electra 2 door hardtop I used to own. Should have kept it! Quote Link to comment Share on other sites More sharing options...
HNTR Posted April 28, 2013 Author Share Posted April 28, 2013 I believe that is the exact bumper and tire carrier I am using. I also like those taillights. Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted April 29, 2013 Share Posted April 29, 2013 I believe that is the exact bumper and tire carrier I am using. I also like those taillights. Thanks Mark that is the bumper / connie kit from the Revell '59 Chevy convertible kit. I molded in the lower valance from the kit too. The tail lights are AMT '57 Ford with a Revell '59 Caddy bullet mounted in the center. I've been playing with this one since the late 1980s. The body was a slush cast blob from a long defunct company. It was a hardtop but the pillars were so thin I just broke the roof off. There was a ton of slag attached to the rocker panels and the rear quarters were short shots. It was a mess. It took a lot of on and off work just to make it look like a nicely cast resin body! I believe I will finish this one. I recently found a set of custom pattern seats I wanted to use in it. As far as explaining the chassis, I do have some Cuba license plates... somebody built up the Buick convertible on an available Chevy chassis.. yea, that's the story! Quote Link to comment Share on other sites More sharing options...
HNTR Posted May 5, 2013 Author Share Posted May 5, 2013 (edited) Sorry it has been a little while since I posted. Still carving out the lines. Found a pic of exactly how I want to build this kit. I will also have to carve out the grill and redo it. Here is a pic of how I do plan I building it, other than I am building a convertible. The interior will have some light blue highlights. Edited May 5, 2013 by HNTR Quote Link to comment Share on other sites More sharing options...
FASTBACK340 Posted May 5, 2013 Share Posted May 5, 2013 The '59 is indeed a beautiful car wiyh nice, flowing lines. I built a swap meet cast away '59 Buick a few years ago. I built mine as a custom convertible with a mostly scracth-built interior. Let me see if my laptop is co-operating this morning (pictures on my hard drive) as I don't have them on my phone. BRB......* Quote Link to comment Share on other sites More sharing options...
HNTR Posted May 5, 2013 Author Share Posted May 5, 2013 I am waiting to see the pics. Been looking for built kits to check out, as they seem to be very scarce. Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted May 5, 2013 Share Posted May 5, 2013 That light blue hardtop is gorgeous! I say build yours just like it. That would be a contest winner. Later- Quote Link to comment Share on other sites More sharing options...
HNTR Posted May 5, 2013 Author Share Posted May 5, 2013 ​I took out the front grill and now I need help. While I am hollowing out the headlights I could use some (ALOT) of input on what to use and how to redo my grill. I want it to look like the one in the included pic. Please and thanks for your help. This is what I want my grill to look like: This is my grill carved out and needing suggestions. I am hollowing out the headlights as we speak. I kept the old grill so I can use it as a template. So help please Quote Link to comment Share on other sites More sharing options...
dino246gt Posted May 5, 2013 Share Posted May 5, 2013 Doesn't the '59 Chev have a tube grille that could be cut to fit? You won't get the curves under the headlights like the 1:1 pic, but you have left the headlights attached to the bumper which is a good idea for this. Quote Link to comment Share on other sites More sharing options...
FASTBACK340 Posted May 5, 2013 Share Posted May 5, 2013 Hosted on Fotki Quote Link to comment Share on other sites More sharing options...
FASTBACK340 Posted May 5, 2013 Share Posted May 5, 2013 Hosted on Fotki This started as a $5 model club meeting purchase. Modelhaus bumpers & dash, Pegasus wheels, Model Master water based acrylic air brushed with a cheapie Badger. The entire interior was fabricated e/ Pegasus speakers & power amps in the back seat. Seats from the Matt Hayes T-bird. Cruiser skirts started a sheet Evergreen. Quote Link to comment Share on other sites More sharing options...
HNTR Posted May 5, 2013 Author Share Posted May 5, 2013 (edited) Doesn't the '59 Chev have a tube grille that could be cut to fit? You won't get the curves under the headlights like the 1:1 pic, but you have left the headlights attached to the bumper which is a good idea for this. It does but it has too many horizontal posts and comes to a point in the center. If you look close under the headlights it does have the verticle lines. I want to match those lines up and just give it a "white" wash in between them so it looks like the body is behind it like in the pic. I am leaning towards just stretching some sprue and sanding it flat to put in there. That way I can make it whatever size I want. I was hoping there is an easier way. Edited May 5, 2013 by HNTR Quote Link to comment Share on other sites More sharing options...
HNTR Posted May 5, 2013 Author Share Posted May 5, 2013 Hosted on Fotki Nice Buick. I like the custom look. I wish I could enlarge the pic, my eyes are kind of bad. Looks cool. Quote Link to comment Share on other sites More sharing options...
HNTR Posted May 5, 2013 Author Share Posted May 5, 2013 AMT '58 Chevy and '57 Ford both have tube grilles that are flat. Aside from that how about some stainless steel or aluminum wire instead of the streched sprue? Both polish up nicely. I thought about that. My idea was being that I was going to send it out to chrometech when I was done. I have a few more parts that are going to him also. I know about the alclad but it is just not the same shine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.