Jump to content
Model Cars Magazine Forum

Modelhaus 1970 Ford Country Sedan


Recommended Posts

Well, I got a pleasant surprise by my postman as I got the latest and greatest from The Modelhaus! I had bought this around the end of the year and had almost forgotten about it 'til this box shows up on my doorstep.

I have to give kudos to Don and Carol as the turnaround time was very quick and the model is excellent as always! :(

Here are some pics to show whatcha get..............

First you'll need this or its reissue to build the transkit...........

P2102232-vi.jpg

I've had this kit for over 10 years............and wasn't that crazy about it------in fact was about to get rid of it until I seen this........

P2102220-vi.jpgP2102222-vi.jpgP2102223-vi.jpg

As you can see, very little cleanup is needed to make things go smoothly. Whoever did the master knows their stuff as the conversion is dead on accurate IMO to the 1:1.

Here's the rear section interior tub............some filing may be in order to get it to fit squarely in the interior.

P2102228-vi.jpg

Here's the glass they give you......

P2102226-vi.jpg

I gotta admit, I'm not too crazy about the glass------when I build this one (probably later this year), I'm going to replace all the glass including the windshield, with clear stencil sheet (acetate).

Some more to come! :(

Edited by MrObsessive
Link to comment
Share on other sites

Here's the rear bumper that's given............It was modified to suit the wagon which is very different from the sedan.

P2102224-vi.jpg

And a shot of the taillights which I think were scratchbuilt also as I've not seen these on any model before.

P2102229-vi.jpg

Nice set of wheels and tires here...........although I'm not sure these wheels came on the standard Country Squire. These appear to be more LTD like, but I guess thay could have been ordered from Ford. You Ford guys out there would know! :(

P2102225-vi.jpgP2102227-vi.jpg

The chassis appears to fit fairly well...........I don't like the empty look of the wheelwells, so when I get around to building this-----some filling in is in order!

I'd imagine that some reshaping of the exhaust would be needed to as most wagons I've seen, have their exhaust exiting out the side as opposed to out of the rear due to the possibilty of exhaust fumes coming through the open rear window.

P2102231-vi.jpg

Here's an excellent example of how nice this one can be built! I got these pics off eBay-------it was built by Paul Hettick (eBay handle: Robbbbbb57). His I notice has different wheelcovers than what Modelhaus gives you. I'm not sure what kit his wheelcovers are from, I kinda like his better than the ones in the transkit.

His model is what inspired me to buy this kit! :(

eaa7_3-vi.jpged01_3-vi.jpgf302_3-vi.jpg

Price for the kit in case you're wondering, is $50+S&H plus whatever the base kit costs if you don't have it.

I give this one a Highly Recommended rating especially for us guys who are into the "Mainstreamers". ;)

Link to comment
Share on other sites

Whoops!! ;):blink:

It actually is a Country Sedan! I had Squire on my mind when I typed the heading. I did change the title.

No, I don't care for the fake wood on this particular wagon.............some it looks good on, some it doesn't. :(

If I had a wagon and that special lady, the only wood I wanna see is..........................No nevermind!

Because.......errr.........No I can't say that either! :(

Link to comment
Share on other sites

  • 2 weeks later...

I plan to buy one of those myself. I'm going to combine the kit with some LTD Pieces to do a '70 Country Squire to go with my '67 Caprice Wagon.

post-313-1203739907_thumb.jpg

Those wheelcovers are the '68 through '71 Finned Wheelcovers, originally found in the '70 Ford LTD 4-Door Hardtop, in the AMT Motor City Stocker Series. A friend of mine's parents ahd a Light Blue '69 Country Squire. Mine is going to be Black, of course, with a black interior.

Edited by Ron Hamilton
Link to comment
Share on other sites

I'm pretty sure that Paul Hettick mastered that one too!

Not only does he build exquisite models but he has created quite a few masters for Don at Modelhaus.

That's a pretty sweet wagon...I'll have to order one... he's mastering a '72 LTD 2dr ht now (saw it posted on the other board recently).

When I build the wagon, I'll probably use the hubcaps from the '69 XL kit..they are more plain.

Edited by Rob Hall
Link to comment
Share on other sites

Very cool looking Bill! Those old wagons rock. I'm hoping that someone will convert it into the 69, and then have Modelhaus cast it....we had one of them, I don't remember it but I have photos of it!

Billy - For the wagons the only difference between the 69 and 70 was the grille. I don't know if anyone has cast a 69 Galaxie grille but that would be a natural for this. I looked in my old brochures for the 69 and 70 and there was no way to get an LTD/XL grille on one of these. I had wanted to use the 69 XL grille but that would only be appropriate on a Squire.

Link to comment
Share on other sites

Billy - For the wagons the only difference between the 69 and 70 was the grille. I don't know if anyone has cast a 69 Galaxie grille but that would be a natural for this. I looked in my old brochures for the 69 and 70 and there was no way to get an LTD/XL grille on one of these. I had wanted to use the 69 XL grille but that would only be appropriate on a Squire.

One thing I've thought about doing is trying to make a '69 Galaxie grille from a '69 Fairlane grille (from the AMT Torino Cobra kit). The '69 Galaxie grille looks a lot like a wider version of the Fairlane grille...

Link to comment
Share on other sites

  • 1 month later...
I plan to buy one of those myself. I'm going to combine the kit with some LTD Pieces to do a '70 Country Squire to go with my '67 Caprice Wagon.

Looks like the Modelhaus now has a Country Squire version also! I wonder if it has woodgrain on the sides..

Link to comment
Share on other sites

I am looking 4 a 56 & 57 ford wagon and a 68 mustang CS.If anyone has heard of any of these please let me know.Im also looking 4 late 50s mercs.

Hendrix Resin has several '56 Ford wagons..they appear on ebay frequently. I think R&D Unique used to do a '68 Mustang CS, not sure if it's still available or not.

Link to comment
Share on other sites

  • 3 weeks later...
  • 3 months later...
That's a pretty sweet wagon...I'll have to order one... he's mastering a '72 LTD 2dr ht now (saw it posted on the other board recently).

When I build the wagon, I'll probably use the hubcaps from the '69 XL kit..they are more plain.

one of these?

72ltd.jpg

link to his post?

Edited by rollinoldskoo
Link to comment
Share on other sites

  • 2 weeks later...
Looks like the Modelhaus now has a Country Squire version also! I wonder if it has woodgrain on the sides..

I just got my '70 Ford LTD Country Squire wagon from the Modelhaus and YES it has the wood grain.....looks pretty good too, has the black stripes along the wood grain just like the full size I have in my garage...

Jonny

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...