Jump to content
Model Cars Magazine Forum

Green Elephant Vega body color


Recommended Posts

Rather than hijack one of the other threads about the Green Elephant, I decided to start another one. I had tried for over a month prior to the arrival of my kit to locate Testors #1835 Lime Ice, with absolutely no success.  After I received my kit about 10 days ago, I decided to try painting the body with Tamiya TS-52, Candy Lime Green.  The body was assembled, the seams filled and sanded, painted with two coats of Taimya fine white primer, resanded, two coats of of Tamiya AS-12 Bare metal silver and finally two coats of Taimya TS 52.  I am not good with an air brush, so all coats were shot from rattle cans.  I am happy with the finish, but very unsure about the color.  Your thoughts and comments welcome!

4CC5FA62-4166-44C3-95B3-20B20B841BE8_1_201_a.jpeg

E2908CC8-FE4A-4919-9C8E-37592360A4EC_1_201_a.jpeg

Link to comment
Share on other sites

Looks like a nice paint job but way too light. I bought a green by Tamiya I was going to use but low and behold I found a half can and a brand new can in my paint stash and neither one leaked !

Link to comment
Share on other sites

Okay fellow modelers, here is an update on the body.  I am calling the painting of the body finished.  I took a slightly different approach after the feedback I got.  I sprayed a coat of dark grey (not black....I just couldn't spray it black!) then resprayed two coats of the Tamiya TS-52 Candy Lime Green.  I am much happier with the color than my original effort. It may not look like it in the photos, but it is quite a bit darker than it was in the original post.  Again, thoughts and comments welcome.


A separate question for you all that are working on this model.  I know that the injector/blower hat is not correct for the actual car.  Is the Competition Resins Crower 8 point injector and hat a more appropriate substitute??  Thanks in advance for your feedback.

E1C59D9D-AF7F-4B3A-8979-DB0C669693AA_1_201_a.jpeg

492AFF1B-BFFB-4C54-AD7E-832A96A62B8A_1_201_a.jpeg

70ABE15A-3D6F-4B8A-B597-29FF3415DD30_1_201_a.jpeg

08688D7D-6D18-4753-887D-404DD2C1F607_1_201_a.jpeg

Link to comment
Share on other sites

I wanted to give you a heads up on the decals if you don't mind. I started laying some down on the body today. First, they release from the paper pretty fast. Second, the hood decal... I could not get it to lay down as I would have liked. I did use Solveset setting solution which did help but it was/is still not great. You may have different results and I hope you do.

Link to comment
Share on other sites

11 hours ago, cobraman said:

I wanted to give you a heads up on the decals if you don't mind. I started laying some down on the body today. First, they release from the paper pretty fast. Second, the hood decal... I could not get it to lay down as I would have liked. I did use Solveset setting solution which did help but it was/is still not great. You may have different results and I hope you do.

I'll let you know how mine turn out.  I will let the body sit for a while and work on the engine and frame before I proceed with decals. 

Link to comment
Share on other sites

Thought I'd post an update on the progress of my Atlantis Green Elephant.  I have the frame assembled and some of the tin on.  I've got it on its wheels!  The fuel tank, cockpit tin and  select chrome pieces are painted with Tamiya TS20, Metallic Green.  The same paint is used on the green pieces on the engine I've also made some progress on the engine, although I'll be redoing the ignition wires after I receive a shipment of parts from ProTech.  The blower hat is not glued on, just setting there for its good looks.  Comments welcome!

4D334BA7-0607-471A-9156-BCB4E651152E.jpeg

64F3ACBE-9457-4396-870E-30B4209D094B.jpeg

57950470-7425-4350-B566-D3190691AF7E.jpeg

AE7D78A7-F225-4B34-BE25-6EE9BCA60C20.jpeg

10A7F2FB-09B4-4D6B-99A8-DA334B37D751.jpeg

  • Like 1
Link to comment
Share on other sites

Looks good to me ! Mine will be done today or tomorrow. Please don't take this as me telling you what to do but you may ( I say may ) have a problem lowering the body down on the chassis due to the engine wires. They look good but may stick up too high.

Link to comment
Share on other sites

7 hours ago, cobraman said:

Looks good to me ! Mine will be done today or tomorrow. Please don't take this as me telling you what to do but you may ( I say may ) have a problem lowering the body down on the chassis due to the engine wires. They look good but may stick up too high.

Thank you for the observation.  I'm not at all pleased with the kit spark plug wires which is why I bit the bullet and ordered a complete set of wires and boots from ProTech.  I'll be replacing the kit supplied set as soon as the ProTech parts arrive.  I'm hopeful that the ProTech parts will be MUCH more flexible (I've never used their products but have read and heard lots of good things) and allow me to bend the wires the way I want them.

Link to comment
Share on other sites

  • 1 month later...

I know it 's been a while since I update my Green Elephant.  We have been going to sprint car races and I took a break.  I was pretty disappointed in the way the engine looked, so I took a step back and decided to go the extra mile and ordered a bunch of Pro Tech Model parts and took a leap of faith and ordered a resin Crower 8 port injection body and hat.  After removing the wiring and starting all over with the Pro Tech parts and using the braided lines for the fuel and oil lines I am much happier with the results.  I am not a good enough modeler to do justice to the Pro Tech detail parts and the LPH 1320 Model Products resin Crower injection body and hat but they provide a much more realistic look and I am very pleased with the end results.  

E1357FCD-4E7A-494C-B7C1-1A8A76F9BCF2_1_201_a.jpeg

B36835B3-3873-4B15-8400-7ACF553D3A27_1_201_a.jpeg

77D25652-FDB9-4D91-A7CD-2A4B85D7C817_1_201_a.jpeg

  • Thanks 1
Link to comment
Share on other sites

10 hours ago, cobraman said:

Great looking engine.

Thank you!  I took your advice about the yellow plastic spark plug wires and replaced them.  Much happier with the look now, plus no issues in getting them under the body tin.

 

Link to comment
Share on other sites

Here is another update on my Green Elephant kit.  I have the engine mounted in the chassis and all the fuel plumbing done (HALLELUJAH!!!) and I've modified the body tin.  Having built numerous Revell 1/16 funny cars, I have learned to modify the tin in order to get the body to sit down properly on the chassis and get the "attitude" appropriate for a 70's era funny car.  After installing the LPH 130 Model Products incredibly detailed Crower injection and hat, I realized that the new parts would also require me to modify the doghouse area of the tin as well.  I added 5mm of height to the doghouse area and tapered it back to fit behind the windshield.   As always, thoughts and comments welcome!

 

6F9E050C-60A3-4461-9399-D2D49ED6DE65.jpeg

BB1A84F5-154B-4A54-9D53-F4BB0B7D1636.jpeg

4CA2E609-78AB-433B-9D52-87E681A9B72F.jpeg

F2474979-8377-408F-A0FF-9A0854AFD705.jpeg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...