Bugatti Fan Posted October 1, 2021 Share Posted October 1, 2021 Just remembered that Bob Steinbrunn did an article about his build of the Hubley Duesie a few years ago in MCM. An earlier posted mentioned a boat tail by.Monogram. I can remember a Packard boat tail by Monogram but not a Duesenberg. Please correct me if I am wrong. 1 Quote Link to comment Share on other sites More sharing options...
Tom99 Posted October 2, 2021 Share Posted October 2, 2021 Beautiful!! 1 Quote Link to comment Share on other sites More sharing options...
ScottGMN Posted October 2, 2021 Author Share Posted October 2, 2021 (edited) Bugatti Fan...I know that article well. I've been trying to emulate it for five years. This is as close as I'm going to get. No way I'll be replacing wheel spokes! Monogram did both a Packard and a Boat Tail Duesy in Metal. Edited October 2, 2021 by ScottGMN Quote Link to comment Share on other sites More sharing options...
landman Posted October 2, 2021 Share Posted October 2, 2021 On 9/28/2021 at 11:54 AM, e30lover said: Absolutely stunning! X2 1 Quote Link to comment Share on other sites More sharing options...
slusher Posted October 3, 2021 Share Posted October 3, 2021 Absolutely stunning! 1 Quote Link to comment Share on other sites More sharing options...
Bugatti Fan Posted October 3, 2021 Share Posted October 3, 2021 Scott, I build mine some time before Bob's article appeared. Reading it reminded me of the things I had missed on my model. I have attached a few pics of my old Hubley Duesie. 1 Quote Link to comment Share on other sites More sharing options...
ScottGMN Posted October 3, 2021 Author Share Posted October 3, 2021 6 minutes ago, Bugatti Fan said: Scott, I build mine some time before Bob's article appeared. Reading it reminded me of the things I had missed on my model. I have attached a few pics of my old Hubley Duesie. Wow...I'm guessing doing a hinged hood back then was a lot harder. So many more products and tools have been introduced even since Bob shared his Duesey. Nicely done! Quote Link to comment Share on other sites More sharing options...
Bugatti Fan Posted October 3, 2021 Share Posted October 3, 2021 (edited) Thanks Scott. I used a miniature abrasive cutting disc in a tool similar to a Dremel to cut the hood into sections. Hinges are miniature piano hinges from dolls house suppliers. Replacing wheel spokes is not as hard as it seems. On mine I cut out 3/4 of the spokes on the fronts and backs to keep the rims and hubs concentric. Drilled through where I had removed the spokes and replaced with wire. When the adhesive was set it was a matter of removing the remainder of the kit spokes and drilling for the remaining wires to be fitted. Edited October 3, 2021 by Bugatti Fan 2 Quote Link to comment Share on other sites More sharing options...
crazyjim Posted October 3, 2021 Share Posted October 3, 2021 Beautiful build. 1 Quote Link to comment Share on other sites More sharing options...
ScottGMN Posted October 4, 2021 Author Share Posted October 4, 2021 21 hours ago, Bugatti Fan said: Thanks Scott. I used a miniature abrasive cutting disc in a tool similar to a Dremel to cut the hood into sections. Hinges are miniature piano hinges from dolls house suppliers. Replacing wheel spokes is not as hard as it seems. On mine I cut out 3/4 of the spokes on the fronts and backs to keep the rims and hubs concentric. Drilled through where I had removed the spokes and replaced with wire. When the adhesive was set it was a matter of removing the remainder of the kit spokes and drilling for the remaining wires to be fitted. Wow! Still looks daunting. But I downloaded this pic and stored it for future reference. Maybe I'll try it one day and, if successful, replace the wheels on my existing builds. Thanks for sharing. I split my hood with a diamond cutting wheel on a Dremel two years ago. Turns out that was the easy part. Tried the MCG hinges Bob used...major fail. It took me two more years to find a hinge close to scale that would work within my skillset. Quote Link to comment Share on other sites More sharing options...
bobthehobbyguy Posted October 4, 2021 Share Posted October 4, 2021 Quote Impressive work. Great subject. 1 Quote Link to comment Share on other sites More sharing options...
Bugatti Fan Posted October 4, 2021 Share Posted October 4, 2021 Scott, I hope that the picture you downloaded will be useful as a reference. On the card where it says front wheel and rear wheel it should read front of wheel and rear of wheel. Replacing spokes is not as daunting as it appears, although it may seem so when you look at a finished wheel. The process is more tedious than daunting but worth the effort. You may have some old wheels in the spares box that you could experiment on. Worst that can happen is a bit of scrappage. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.