customline

.....and that's in what scale Trevor? Good gracious ?......although I think I have tweezers that could possibly handle that. No, really.....☺️

Cool project, Bob. I'm eager to see the stance you come up with. Great start ? !

Mini-update: Joined frame assembly to floor assembly ? and installed exhaust systems. Added a little paint detailing to firewall and now I have to decide on the attachment of the firewall. I have thrown the question out there twice now and, as yet, no one has weighed in. I anticipate a fit problem if I go with the AMT instructions. The firewall is shown being glued to the interior assembly but it's not a precise fit - no locators. The fit of the firewall to the body at the inner fenders IS a nice tight fit as if it had been designed that way. I'm inclined to go with that but can't help wondering if I'm not seeing something that I need to before I run up against it during the final fit-up. You all know how that goes. Whomever has built this kit please speak now ? or forever hold your peace. ? The instructions may take into account the placement of the steering box in the sequence of assembly; I can deal with that.

Thanks, Ian and Dave. I like the color a lot for an interior and it's all done with rattle cans in one session. First the flat black which dries fast. Then Krylon gloss Burgundy, no more than two light coats because the black needs to show through. After the burgundy is dry, I hit it with satin clear. Done and done. Results may vary ?. And I think you're right, Ian, that the shine will help to bring out the pleated "upholstery" and the "grain" ; I'm glad you pointed that out. Out in the sun, that color is quite 'purple-ish" but indoors it's good. Below is the first time I did this and it was because somebody on a forum pointed out that what's underneath affects the final color. How right they were. This isn't anything new but it was for me ?. As far as the guages, Dave, I'm a fan of Michael Hanson's work (SEE ABOVE). I buy a small quantity at a time to get the discount and they make quite an impact on some builds where they can be easily seen. I also like that you can get SW in black or white face, and Sun gages too. Great stuff.

Thanks, Rusty. It's a bit too shiny but think "Armor-all" ?. All that work on the dash and you can't see it! I need to decide how to handle the firewall. My gut says glue it to the body. ? I don't trust the instructions.

Thanks, Anton. Here's more shots from yesterday.

Thanks, Bil. I can't understand why, sometimes, the photos I post don't end up in the order I had them in when I hit the enter button. Maybe it's this Android thing that I use. I may try a Fire I have. Driving me crazy ?

Weekend update: got interior detailed and glued up. I figured the door panels were too irregular and detailed for me to use foil for those big chrome things (I'm sure others have been successful) so I used Molotow and 18/0 and 3/0 brushes along with black chrome foil and flat black paint. The dash is detailed with flat black rattle can, foil, Molotow chrome and Best Model Parts photo reduced guages. I tried to shave off some of the instrument detail for a flat surface to mount the "guages" to but had to settle a bit. A parking brake release was added. The front seat was detailed with foil and .022 solder. Rear seat got black chrome foil and Molotow chrome applied with brush. This interior was difficult, for me, to detail cleanly. There is much high relief, complicated detail molded in to begin with and the door panels would have been awesome with chrome foil detailing but for my limited skill with that stuff. I opted to use foil where I could be somewhat successful in doing so and Molotow for the rest. The closeups are quite revealing of the difficulty level for me but I'm happy with the overall result, the "big picture". Heck, once it's all together you can't see much anyway. Thanks for watching i

Wow! (And I was afraid it might have been a false memory ?)

I think one of the gas ⛽ station brands gave 'em to customers.

And then there's the ones that come with plastic balls for heads that you can detail to look like the smile face ones people (not me, of course ?) used to find their car in a big parking lot. Usually, they were florescent chartreuse.

Yes it is, Rusty, it absolutely is. Maybe I should cut back on the brownies ?

OK, I checked out the Buick forum. ? This is making my head hurt. A/C, no A/C, California emissions, mid-year changes.....Ahhhhhgh!!!!!....I have a 1967 Motor manual in the garage that I will dig out today and if I can find anything in it I'll go with that. I need a nap ? Addendum: couldn't find 1967 Motor repair manual. Did not get nap. More research needed. Moving on to exterior paint before time runs out. Detailing interior appears to be a bit too treacherous for foil. I won't risk any of my good foil for that.

Thanks, Rusty, I really appreciate your interest. I'm glad the brake line isn't glued ?. Sorry it kept you up last night ?.

I dunno, Rusty. My gut says the brake lines should be away from the heat but brake fluid is formulated to perform in a wide range of extreme conditions. Then there is the sequence of assembly (Buick's, not mine). Having done body-off-frame work and run brake lines on the frame (a '39 Plymouth, not a "Y frame" Buick) while it was easily done....I dunno ?. Really think the interior color is sexy? Picture it with all the chrome ?. Tomorrow.

I believe you're right and I thought it was wrong but I saw this (below): what am I seeing here? The dark red interior...I'm seriously considering using Boyd's Dusty Rose on the outside. Think about that combo ?

Her "sister" would have been featured on the trunk lid. I was looking forward to that. Come to think of it, I spend way too much time trying to make decals ?.

Big day, today....The kit engine seemed pretty decent until I tried to hook up the fuel line to the ....uh.....where's the fuel pump? ?! OK, gotta make one...NP....Next, I got the exhaust system ready for installation by sanding the filler I had to use on the two- piece resonators. Oh, yeah, a new one on me ?. The kit provides "fillers" for the resonators that are cast hollow. But it's not quite a tight fit. Gotta fill 'em. Then on to the hood to block sand the filled sunken areas. Done. Finished brake line install. Mocked it all up and.....behold! the floor bottom will be sprayed with red oxide primer before assembly. I like the way the gray looks but the red oxide may be correct, yes?oh, and I painted the interior pieces. Flat black first, then Krylon gloss burgundy, then satin clear. They should be dulled a bit more. Tomorrow.

I'm just happy I didn't waste another sheet of decal paper before I broke the nose. It will probably sit in that box till I need those bomber seats and then the fate of the Wild Kinky Six will be sealed ?

Amen, brother! I buried it with the decapitated Camaro ?.

Been waiting for this one to show up here, Bil. It's a real nice tribute to the 1:1 that inspired it.

That Linkin got PERSONALITY ! I love it! It's refreshing ! And that Extreme Lacquer is awesome, ain't it?

Your "Toilet Seat" comment, David, sent me into a red-faced, gut-wrenching laughing fit that led to a COPD fueled coughing episode that caused my wife to awaken from snoring bliss and think I was dying. Thank you very much! Seriously, though, who in Detroit thought that ridiculous thing on the trunk lid was attractive to anyone but .....anyone at all? (Well....maybe my wife ?)

The Wild Kinky Six went into a box today. It may surface at some time in the uncertain future but for now, the photo above will be what will suffice for the finished build, the "under glass" shot. I broke it's nose and the time to put it right would interfere with getting the Riv painted before Mother Nature makes it impossible. Once the dreaded pollen starts turning everything green, finish painting is out.. and I'm pretty much screwed till July. ? Thanks for your interest and hey, it was fun ?!R.I.P. ?

Yup, this one had me fooled until I actually started working on it ?. The extra work is worth it, though. It's still a decent kit, no fatal flaws. Just a few small headaches. I've seen worse ?.Thanks for your interest, John.