absmiami
-
Posts
4,711 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Everything posted by absmiami
-
Betting you’ve heard of the Don Lee Special …
-
Correct
-
Pierre - i just ordered pinto’s latest - the ‘32 Alfa 8c type b …. Got a particular car in mind …
-
Page 14 - what a relief !!
-
Also making the brackets from nickel silver strip …
-
The photo-etch sheet has relief etched windscreen frames - but I’ve got some 1/32 channel i’m using to replace these parts …
- 565 replies
-
- 1
-
-
- quarterman
- fisher
- (and 1 more)
-
Better …
-
Dept of Corrections corrections - decided to redo the forward frame rails -
-
Its a mash up - The kit included 3 frets of differing thickness - the rings are on the fret with the windscreen frames and hardware - i added my own switches and knobs made from pins, nickel, and alu - that way the smallest parts all had stems for location and strength …
-
The restored .0010 has two dash panels - one for touring - and this one - which is probably period correct …
-
To the instr dash - which features Mike Quarterman’s great instr decals - yes - you can read the numbers on the tach - all of them - doing the switches w alu tubing, straight pins, and switches fr nickel silver-
- 565 replies
-
- 1
-
-
- quarterman
- fisher
- (and 1 more)
-
The bonnett is held up by a strut that attaches to the eng compartment side panels made of nickel silver - with a donut glued to the bonnet to locate the tip of the strut - got to do the same for the trunk …
- 565 replies
-
- 1
-
-
- quarterman
- fisher
- (and 1 more)
-
Here’s the second - smaller - fuse box
-
This bulkhead also has a device that unlocks the trailing edge of the bonnett - i think it is attached to a release under the dash - although the release is not visible in any of the photos …. Made this from .015 nickel silver - 2 long lengths and 2 shorter ones - and two pin holders - left and right …
-
The fuse boxes on top of the eng compartment bulkhead have at least a dozen wires that feed into a hole on the bulkhead - using Evergreen strip and Detail Master .0075 wire - which is my goto for 24th sc electrical wire -
- 565 replies
-
- 1
-
-
- quarterman
- fisher
- (and 1 more)
-
Fujimi’s kits always have engine bay decals - i’ve “borrowed” the Bulkhead plate from a Daytona kit - had to do it - the plate on the Barquetta is in a prominent place on its bulkhead - couldn’t leave it off …
-
The battery is finished with caps taken from my stash of old stock TMF allen head bolts …. Painted Tamiya signal red over primer …
-
Reinforcement of the hinges and a coat of Alclad lite sheen to knock down the gloss on the under-side …
-
Gramps - I’m justifying breaking up one wheel and tire in the set - because i know I’ll need at least one more spare for a future ferrari proj …
-
Here’s how it looks in the trunk - still got to make a mount for the spare …
-
Here’s the assembly for the Deeks wheel - 2 rings of photo-etch and 3 wh metal parts …
