Jürgen M.

Hi everyone, finally there's more progress! Didn't have much time recently, that's why it took so long!

Now the exhaust pipe and air filter are connected! ?

Hi everyone, There´s some progress to report: The rack which holds the exhaust pipe and the air filter is mounted, as well as the just named parts: The cap on the exhaust pipe actually works. it opens and closes.

And the show goes on:

Yeah, the tires and the printer have arrived! ? VID_20231205_130923.mp4

Got the tires today. Rear wheels are ready to mount. Front wheels aren´t ready yet. They´re not as nice as I hoped, therefore one more round of printing!

Hi Guys, here's the painted chassis with engine and shaft. Hope my new printer arrives soon. Want to geht the cab finished.

And here's the engine: Will be painted soon! ?

Hi everyone, The chassis is finally painted. As soon as I get the tires (had to order them, ran out with the Diamond Reo!) ? I can put on the wheels. Anyway, it's going forward bit by bit. The engine is ready to be painted, will happen tomorrow or saturday! This was the test if everything fits in!

Nice! ? I like doing the exotic stuff! Looks like a great challenge. Did you print the cab parts yourself? My printer hardly does the rivetts and other details Like the cab you've got. It's gonna look pretty authentic that way. I'll keep watching!

Hi Folks, the engine is in print. Had to design a new Transmission because the one I used for the Diamond Reo COE was too big. Since the front part of the chassis is lowered the standard engine doesn't fit. I also made a new oil pan. It's flatter so it doesn't interfere with the steering rod! I also printed the rack which holds the air filter, and the exhaust system. Tomorrow hopefully I'll get the new printer. The new filament arrived yesterday. That's why I was able to go on with printing! I also had to change the position of the turbo charger from the right side to the rear of the engine and therefore also the intake and exhaust manifolds. You'll get to see those soon. Stay tuned! ?

Thanks Rockford. I´ve primered the chassis in the mean time, soon I´ll put on the top coat. The front rims are in print (for the third time!) had problems with my printer. Hope they´ll turn out ok this time.

Wow, I'm really happy about your feedback, thanks! ? I've made a little further Progress but now I have to take a break because my filament is bound to end! Have to wait a few days till new supplies get delivered! But of course I'll show you what's happened in the mean time! The break cylinders and the tank support are mounted. The rear rims are also finished but will not be mounted before having painted the chassis! By the way, I'm also expecting a new printer. I'm really excited about that 'cause it's going to be more automated. Print bed leveling ist no more a manual pain in the ...! And it prints a bit faster than the old one! Hope the quality ist also as much better as promised! We'll know soon! ?

A little update on the chassis: VID_20231124_193357.mp4

Got some new pics to the chassis progress. Not much but it´s getting there! VID_20231124_110654.mp4

Hi everyone, I also tried out the chrome spray from Revell and I was quite disappointed. The finish was at first very promising but even after I had left the parts on the workbench for about a week, I ended up having fingerprints and foggy patterns on the surface. Don´t know if I did anything wrong but I followed the instructions on the can. Very carefully I then handled the parts that came out optically reasonable but I´m not really convinced of the quality of the spray. If anyone has a hint what I could improve, I´m always open minded for new ideas! I know of course that the surface of the parts shows through but if you look at the radiator grille, that was absolutely even and hat no structure at all. Now it looks like it was hammered. The exhaust pipe looks foggy, the fuel tanks also.

OK, here´s a bit of progress on the chassis: I had to exchange the front axles since they kept breaking. I put in metal pins. Also the vertical steering axles are of the same metal material. It´s just safer that way. wouldn´t want to take everything apart if something breaks. But the steering works. Still have to combine the steering of both front axles. Might have to improvise a little. Thought I´d also add some pics of the 3D designs:

Hi fellas, welcome to the Astro Club! I had all the same problems with my Astro. Like Rockford said, the old AMT's Had a really bad fit. Still, we're sort of pros in modelling. Nothing can make us give up! That frame jig ist really nice. I just use rubber bands, clothes pins and weights to be sure the frame turns out straight. Maybe it's not much of help but the Pete 352 was even worse! Keep goin', doing a great job! ?

Thanks guys! I'll show you some progress on the chassis later. Didn't have much time today, too much work! But what are evenings for? ?

Awesome work on that one! Beautiful! ??

Beautiful! ??

Hello everyone, I just wanted to wish all of you a Happy Thanksgiving! Greetings from Germany! Jürgen

Thanks by the way for the picture of the original Autocar. ? here´s a little something to see. It´s the printing process of the front suspension: VID_20231122_183542.mp4

Thanks! ?

Thanks for your opinion! ? I think it would bei a challenge to design and print that! ?