Romell R

Negative ! springs from an ink pen are not in scale for 1/24 if that's what your working on.

Ok I'm back and now that the tanks are all painted I added more detail . here you see the breather in place and the cap for the oil tank... here you see a drain plug on the bottom of the fuel tank, there's one on all three tanks.... here the tanks are ready for plumbing I hope you enjoyed as much as i did....

Danno: thx buddy John: always a pleasure Joe: you're not the first person to offer their shrinks number LOL! Niko: Thx for you most sincere compliment my friend, I'll do my best to keep it interesting. Well fellas I was able to get a Lil more done tonight I hope you enjoy the progress shots of the tanks and puke tank breather ok got the tanks ready for primer and paint I needed to make a breather for the puke tank so I used a polishing wheel from my dremel as the filter and some odds and ends from my parts box. almost finished breather Be right back with more update......

Looks really good John , I like your idea of making the vent doors slanted that should work for ya. outstanding job as usual buddy.

Hey fellas thx for all the sincere compliment you guy really inspire me "to keep moving forward"( Walt Disney 1965) I was able to get some paint on the distributor and get the tanks started , fuel, oil,& puke tank I hope you enjoy. the small piece with fit over the plug wires once its all wired up.I still have to clear coat the assembly heres the start of the tanks heres all three tanks together all thats left to do is make AN fitting holes and prime and paint

Dave is correct and the car that im building had a separate magneto as pictured above. And please keep in mind that this distributor is not complete yet. thx for your observation and your comments

Ok fellas time for another update, getting the smaller details out of the way now, I made a MSD distributor from brass it not quit finished because I still have to wire and paint it cant wire it unit my boots get here from RB Motion. hope you enjoy.... I needed to solder a rod in the body so that i would have something to install it with once the distrib. was done then once that was done I could solder the body together..... Ok so maybe I skipped a few steps but I can only post 4 pics at a time now here it is before paint for a test fit....whatya think... see ya soon.....

Once again Randy you blow me away with your skills may i suggest using Johnson & Johnson bandage tape for your seat belts. its the closest thing in scale to the nylon belts used in real vehicles. Keep up the OUTSTANDING work my friend. Romell

hey thx Randy Im looking forward to more on your project buddy Chris your comments are always welcomed thx for the kind words Hers a parting mock up hope you enjoy.....

Ok Im back told you it'll only take a few seconds this is where the pump will mount, one test fit now on to the paint man I love Alclad partially plumbed and ready to install on the motor And here we are the installed oil pump system I hope you enjoyed ......

Thx for all the great comments fellas , and Andy I can only put you in as a back up driver ......Cause this one's gonna have my name painted over the drivers door LOL! Well fellas got another update for ya. I fabbed the oil system today from brass heres a sorta step by step, soldered a piece of tube to a piece of sheet to make a closed cylinder then added a center shaft this will serve the purpose of attaching to the motor a little more detail added ok now i'll clean it up and see you in a few seconds

ENOUGH OF THIS I DEMAND TO SEE MORE PICS OF THIS FABULOUS BUILD!!! ...........I'm sorry did I just say that out loud ? Keep the updates coming Chris

MOST IMPRESSIVE!!!!!

Ok Mark before its done........Can I have this one? body and paint looks great buddy keep up the good work.

Totally agree

John thx man you have a few builds i cant wait to see in person. Keep up the good work ! Good eye Richard most wouldn't have caught that one. Thx for watching

I say you go for whatever you feel John, if you want to build your own chassis GO FOR IT! In the end you are the only person who has to be pleased with your work.

Hey Thanks Chris if I can get my paint to look half as good as yours I'll be a happy camper

in my opinion Chris stick with what you have , 1 the distributor is correct , 2 you already have detail work started on the kit engine

very nice indeed

John :Thx for the sincere compliment Mark : somehow I knew you would get it. Dave: This is your world brother im just trying to get a pass to be in it. Jeff: you have a cold piece of work going on there your self keep it up man! Fellas I just have another small update I was able to get the lower injector lines hooked up I hope you enjoy See ya soon.....

Outstanding Jeff I remember you saying something to me about that brass chassis great job on that too. looking forward to this coming together.

Cant wait to see some paint on this one, great job!

Thx Brandon glad you could share my vision I'm working slowly I was able to get the rear access hatch cut and fabbed the door. enjoy

Really good stuff Greg , that body is really starting to shape up (no pun intended) keep up the good work cant wait to see your next update.