mustang1989 Posted May 16, 2015 Posted May 16, 2015 The idea has been seeded.................................. Lookin' forward to seeing the final results of this!
426-Hemi Posted May 16, 2015 Posted May 16, 2015 Thanks Dan, I'll look into PE, forthe door handle/latches for tool box doors! I can tell you and anyone else reading this message..... Ole John is in DEEP trouble LOL SCRATCHBUILDING kinda "T-R-O-U-B-L-E"........
misterNNL Posted May 16, 2015 Posted May 16, 2015 Several years ago while planning a scratch built truck with some flat exterior panels that needed handles I bought some slam locks from a place called the parts dept.They were offered by McKean models co,707 E.41st.St # 236,Sioux Falls,SD,57105.There are 8 pieces on a sprue molded in black plastic.Don't know if they're still around but if they are that just might be what you're looking for.
426-Hemi Posted May 16, 2015 Posted May 16, 2015 I appreciate it but no sadly McKean models is gone if its the same model company I'm familiar with.....
426-Hemi Posted May 16, 2015 Posted May 16, 2015 John I picked up both the roll back bed and the tool boxes on eBay. The roll back is a nice scratch built. I've seen on eBay where someone has the handles that your looking for they maybe PE. Thanks Ira Carl I'm going to put some kind of light bar or some sort of flashing lights I have not thought those details out yet. Do you have any ideas? The only light bar I have in my parts box is the one with the JoHan Fury cop car. OK I had a look around, and I'm missing something somewheres......LOL That danged left turn at Albuquerque LOL Anyway, I "THOUGHT" I knew what I was doing when you mentioned PE, and so I went looking, I mistook what ya said for Pro-Tech........... BUT you said "PE" Photo-Etch"????? I guess I'm trying to figure out what you were referring too with "PE".....?
Mopar - D Posted May 17, 2015 Author Posted May 17, 2015 John sorry for the confusion been there my self I'm referring PE to Photo - Etch. Check model detailer.
Mopar - D Posted May 17, 2015 Author Posted May 17, 2015 It dose not look like much progress I've been de-chromeing and removing mold lines.
mustang1989 Posted May 18, 2015 Posted May 18, 2015 You're doin' great Dan! You'll get past all the "underground" work and come out smellin' like a rose with this one.
426-Hemi Posted May 19, 2015 Posted May 19, 2015 Dan, Thats looking GOOD.. you'll be there in no time! -I'm back to what seems to be the saying "drawing-board" on the trucks LOL It seems as tho, I was just "building" a motor, and here I am doing it again, went from the 440 in my Power Wagon to my Dads as a 360......
Mopar - D Posted May 25, 2015 Author Posted May 25, 2015 Holiday weekend not to much progress to report. I've black primed the de-chromed parts and sprayed Alcad on them. I also had to redo the fuel tank supports as they were resting on the ground. I'm still learning how to work with the Alcad I'm good with how the axels turned out they look like a black chrome but the other pieces I think need some more Alcad to make them more shiny
mustang1989 Posted May 25, 2015 Posted May 25, 2015 Lookin' top notch so far Dan!!! I'm really liking the alclad. Man I shoulda bought some Alclad chrome while we were at the show!!!! Lookin' forward to more bud!!
Mopar - D Posted May 29, 2015 Author Posted May 29, 2015 Thanks Richard and Joe. Ordered a transfer case from BNL and some carburetors today
mustang1989 Posted May 30, 2015 Posted May 30, 2015 Holee schmokes!!! There he is!!! Good to see you Dan!!!
426-Hemi Posted May 30, 2015 Posted May 30, 2015 (edited) Dan the color you used on the rear in this one, Alclad, "Dark Aluminum" or what? (I have both Chrome and Dark Aluminum from Alclad) and was wondering what that look like on Valve covers............. Edited May 30, 2015 by 426-Hemi
Mopar - D Posted May 30, 2015 Author Posted May 30, 2015 John I used the Alcad Chrome it's dark because it only has a light coat sprayed on it.
426-Hemi Posted June 1, 2015 Posted June 1, 2015 Dan, See, I use the Alclad chrome too, but with a gloss black "primer" coating, and then a light coat of Alclad chrome and it simply dries like chrome! What did you use for "primer" under it? (It reflects the base color a bit, and makes a HUGE difference! Which is what I'm trying to figure out as I have both the Alclad chrome, AND "Dark Aluminum" so. thats what I thought you had used at first, the Dark Aluminum!
Mopar - D Posted June 1, 2015 Author Posted June 1, 2015 John I used Alcad black gloss primer but I have a very light coat of the chrome.
Mopar - D Posted June 5, 2015 Author Posted June 5, 2015 I have not had much time to spend at the bench lately still working on some details with the hydraulic system. I have this very poor picture of how I built this rig back in the 70's as a kid. This is a picture of the only picture that I still have of it. The model is long gone now and back then between my older brother and I we were limited with what materials we had to use in customizing our builds. So this is what has inspired me into building my current version of it.
Mopar - D Posted June 7, 2015 Author Posted June 7, 2015 Added the upper supports for the sign boards and have received my new carbs and transfer case for the hydraulic pump. I'm thinking of going with a black bed chrome rails. And a black frame.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now