Sergey Posted January 31, 2021 Author Posted January 31, 2021 Thank you, guys, for your comments! To finish this build I desided to weather dump bed inside. After couple of heavy loads (especialy - gravel) paint starts to slide away, leaving a bare metal, which starts to rust. I started with silver alkid and dry brush. This is example of a wrong way: So the next stage was to cover all this nightmare, using air brush with Mr Hobby's Burnt iron. The paper on photo is template. The corners were sprayed with matt black. And dots of rust were squirted from hard brush. My first attempt. I guess I must change the brush & try different paint thickness Also I learned to use pigment powder to make ground, stuck on the corners. First I fill corners with PVA glue and strew the powder over it. Then press it down with a brush. When I got powder soaked with glue, I srtew a little more powder over. PVA leaves rubber like tape, when it dries, and it is better to cover it with a powder. Next I sprayed it all using Mr hobby matt varnish with minimal preassure to fix the powder. Tell me - what do you think about this work?
Mopar - D Posted January 31, 2021 Posted January 31, 2021 Looks like it’s a used dump truck ready for another load to haul. Excellent weathering!
Oldmopars Posted January 31, 2021 Posted January 31, 2021 I have been following this build from the beginning, I am really impressed with how it is coming along. Glad to see that you are so close to the finish line. It looks wonderful. Can't wait to see it done.
Sergey Posted February 1, 2021 Author Posted February 1, 2021 Thank you, friends for your comments! I will try to picture this GMC outdoors as soon as possible.
signguy2108 Posted February 3, 2021 Posted February 3, 2021 Fantastic job on this one! I've got a couple of hood conversions, but they have required a lot of cleanup, so they are in the closet for now
TruckBuilder Posted April 16, 2021 Posted April 16, 2021 Hello, Sergey! You have done incredible job! For sure I am waiting to see the pictures of the truck outside, as well as I would like to ask you if you plan to make an engine for the truck?
gatorincebu Posted April 17, 2021 Posted April 17, 2021 Sergey , I really like this project. The cab is looking really good. I also like the weathering in the dump bed. It looks to me like you nailed the look ! Be Well Gator
Sergey Posted September 22, 2021 Author Posted September 22, 2021 Thank you, guys! I appreciate it! Here are the photos of finished Dump Truck:
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now