Dose any body know how to make a roll pan

[WesleyOlin]

Hi

im bilding a two wheel drive 1 24 scale custom 77 gmc dose any body know how to make a rear roll pan. or have a nother idea for a custom bumper if you do let me know

[espo]

One idea would be to start with some quarter round tubing that looks like the correct size. You can notch it for a license plate mounting point also. Also look at any older kits you may have and you may find a roll pan that could be made to fit. A few of the older Pick Up kits offered this as an option.  Also any kits that have custom bumper or even roll pans in them. Some times just bending some very fine sheet plastic to shape by heating could work.  

[crazyjim]

Glue in some Evergreen stock and putty it smooth.

[NOBLNG]

If it’s not a compound curve you need, maybe a section of a pill bottle or plastic container of some sort. You’d likely need CA or epoxy to attach non-styrene parts.

[Can-Con]

Try one from an MPC '59 Elcamino. That should be the right shape.

[EngineerBob]

13 hours ago, WesleyOlin said:

Hi

im bilding a two wheel drive 1 24 scale custom 77 gmc dose any body know how to make a rear roll pan. or have a nother idea for a custom bumper if you do let me know

In the past, I've used straight bumpers such as from a van for roll pans; remove the chrome and cut to fit.

[WesleyOlin]

this is what i did for a roll pan i usd som styreen sheets and glue it to the body and puty it and it worked just fine and thanks for your guys ideas and thougst and opinons it realy help thank you