Iraceitall Posted March 30 Share Posted March 30 (edited) It's been over 25 years since I last touched a model kit. After hours of lurking here and YouTube I jumped back in. My first build is this Monogram Thunderbird from the Legends Combo, building as Benny Parsons' #15 Bud Moore car. I'm a little rusty, but it looks OK. No major details except paint and opening up the wheels, which I did swap out with some from a Wrangler Grand Prix since I need 5-hole Welds for that build. Now time for the body, just need a little warmer and drier weather for paint... Edited March 30 by Iraceitall Added info Quote Link to comment Share on other sites More sharing options...
Volzfan59 Posted March 30 Share Posted March 30 Looking good and welcome back to the hobby. Those Bud Moore owned Ford's always looked so good. I took a 30+ year hiatus myself. Been back around two years. 1 Quote Link to comment Share on other sites More sharing options...
bbowser Posted March 30 Share Posted March 30 Looking good. I always liked the Squarebirds even though they weren't very competitive at the speed tracks. 1 Quote Link to comment Share on other sites More sharing options...
Dave Van Posted March 30 Share Posted March 30 Looks good!!! One of my favorite cars and kits! 1 Quote Link to comment Share on other sites More sharing options...
Iraceitall Posted March 30 Author Share Posted March 30 Thanks guys! I have another combo plus one Earnhardt one because I liked them so much. I'm planning on a #29 Tim Richmond and a #90 Jody Ridley at some point. I saw a picture of a #21 Valvoline one Buddy Baker ran briefly in 83 that looked super cool too! Quote Link to comment Share on other sites More sharing options...
Iraceitall Posted April 1 Author Share Posted April 1 Body is in primer, grill got a panel wash, now I need warmer weather for some white lacquer. Quote Link to comment Share on other sites More sharing options...
MarkJ Posted April 1 Share Posted April 1 Great job. Looking forward to more. Thanks for the wip. Wish more people would wip their builds. Love to watch the creation process. You can pick up ideas for your own builds. 1 Quote Link to comment Share on other sites More sharing options...
Iraceitall Posted April 11 Author Share Posted April 11 Body is painted, my lighting isn't the best but it's got 5 coats of white enamel. Grille is in. Next is detail painting, decals, and glass. 1 Quote Link to comment Share on other sites More sharing options...
Volzfan59 Posted April 11 Share Posted April 11 It's looking really good! 1 Quote Link to comment Share on other sites More sharing options...
Iraceitall Posted April 11 Author Share Posted April 11 Thank you! Quote Link to comment Share on other sites More sharing options...
bobss396 Posted April 12 Share Posted April 12 Those are great kits. I did one with Bill Elliott Slixx decals. 1 Quote Link to comment Share on other sites More sharing options...
Iraceitall Posted April 12 Author Share Posted April 12 1 hour ago, bobss396 said: Those are great kits. I did one with Bill Elliott Slixx decals. The one I'd love to do is from 84 when he used the Squarebird at a couple short tracks in the Coors colors. 1 Quote Link to comment Share on other sites More sharing options...
Iraceitall Posted April 18 Author Share Posted April 18 Not much new, I tried painting the window trim with mixed results, and after using my trusty Elmer's, the glass won't stay in. I took that as a sign to do better; ordered some Bare Metal Foil and some Testors window glue. After that it's decals and done, I hope! 1 Quote Link to comment Share on other sites More sharing options...
bobss396 Posted April 19 Share Posted April 19 On 4/17/2024 at 10:48 PM, Iraceitall said: Not much new, I tried painting the window trim with mixed results, and after using my trusty Elmer's, the glass won't stay in. I took that as a sign to do better; ordered some Bare Metal Foil and some Testors window glue. After that it's decals and done, I hope! I use 5-minute epoxy for most of my glass installation. Mix it up, wait 3 minutes and go for it, that way it is less runny. I tape the glass in place so it doesn't move while the epoxy sets up. I have had luck with masking off the rest of the car and using something ike Tamiya TS-30 Silver Leaf to do window chrome. 1 Quote Link to comment Share on other sites More sharing options...
Iraceitall Posted April 19 Author Share Posted April 19 I masked the trim, I just wasn't very happy with the outcome, especially the bumpers. I forgot about epoxy, I even have some. Thanks for the tip! Quote Link to comment Share on other sites More sharing options...
Iraceitall Posted April 19 Author Share Posted April 19 Just got notified my BMF is being delivered today. I'm gonna finish this Bird tonight! Quote Link to comment Share on other sites More sharing options...
MarkJ Posted April 19 Share Posted April 19 7 hours ago, bobss396 said: I use 5-minute epoxy for most of my glass installation. Mix it up, wait 3 minutes and go for it, that way it is less runny. I tape the glass in place so it doesn't move while the epoxy sets up. I have had luck with masking off the rest of the car and using something ike Tamiya TS-30 Silver Leaf to do window chrome. Bob, I have become a big fan of epoxy especially the clear kind that comes in dropper bottles that you can use over and over again. Such a wonderful substance. 1 Quote Link to comment Share on other sites More sharing options...
Iraceitall Posted April 20 Author Share Posted April 20 Decals going down. Unfortunately the decals have yellowed some, but I'm just enjoying the process. 1 Quote Link to comment Share on other sites More sharing options...
bobss396 Posted April 20 Share Posted April 20 8 hours ago, Iraceitall said: Decals going down. Unfortunately the decals have yellowed some, but I'm just enjoying the process. Let me know if you want a set. I have them leftover from my build and they are in my decal stash box. 1 Quote Link to comment Share on other sites More sharing options...
Iraceitall Posted April 20 Author Share Posted April 20 (edited) Thanks. I think I may have another set, I have two of this combo kit, if they look as bad I'll take you up on that offer! Really only the Melling lettering looks bad, the rest seem OK, I cut them as close as possible. Edited April 20 by Iraceitall Added info Quote Link to comment Share on other sites More sharing options...
Iraceitall Posted April 20 Author Share Posted April 20 My other set was no better; I'm putting them under a UV light I used to use to whiten old Tonka parts to see if they lighten up. In the meantime I'm calling it done. It felt good just to complete one. The last model I started on was in 2000, the last one I ever completed was in 1995, so this is a big deal for me. Posting it over in Under Glass. Thank you all for the help! 1 Quote Link to comment Share on other sites More sharing options...
oldcarfan Posted April 21 Share Posted April 21 How did I miss this kit? I didn't know they made a Square-Bird. Looks like you are making excellent progress, have fun on it! 1 Quote Link to comment Share on other sites More sharing options...
Iraceitall Posted April 21 Author Share Posted April 21 15 minutes ago, oldcarfan said: How did I miss this kit? I didn't know they made a Square-Bird. Looks like you are making excellent progress, have fun on it! Thanks! It was sold as the "Thunderbird Legends Combo" around 1997, came with two kits and decals for this and Neil Bonnetts #21 Hogdon car. It's been a fun build, standard Banjo Matthews chassis like all the Ford kits, and the body is pretty decent. I have another, plus Revell sold an Earnhardt Wrangler version in 1998. Quote Link to comment Share on other sites More sharing options...
bobss396 Posted April 21 Share Posted April 21 I had some leftover Craftsman truck decals I tried to use part of recently, no good. I chucked the rest of the sheet out. The edges were yellow and had some crud around them. These are kept in a plastic shoe box, so they are out of direct light. I keep them with my model supplies in my dining room. 1 Quote Link to comment Share on other sites More sharing options...
Iraceitall Posted April 21 Author Share Posted April 21 1 hour ago, bobss396 said: I had some leftover Craftsman truck decals I tried to use part of recently, no good. I chucked the rest of the sheet out. The edges were yellow and had some crud around them. These are kept in a plastic shoe box, so they are out of direct light. I keep them with my model supplies in my dining room. This kit was still sealed when I bought it, interestingly enough the Neil Bonnett decals look great. I opened the other kit up, also factory sealed, same thing. They came from different parts of the country too. Odd. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.