mrmike Posted April 28 Share Posted April 28 I have been chasing this model kit since my birthday in February! And since I needed to buy some paint at Hobby Emporium, they had three of these on the shelf and I grabbed one. The MPC small block 340 does look like it is a tad small compared to an AMT 340 small block (I have two). I plan on building this Demon 340 with the hood scoops, Cragar SS mags, no rear spoiler and stock decals. I can understand why some are using the AMT '71 Duster 340 as a donor kit or replacing the small block 340 engine. 3 Quote Link to comment Share on other sites More sharing options...
Moparman18064 Posted April 29 Share Posted April 29 I’m in! The Duster chassis does work with it( slight amount of tweaking and using front inner clip). Duster engine is much better. 1 Quote Link to comment Share on other sites More sharing options...
mrmike Posted April 29 Author Share Posted April 29 So far the plan is to use whatever is in the box. I am aware of the kit's shortcomings. Quote Link to comment Share on other sites More sharing options...
mrmike Posted April 29 Author Share Posted April 29 I started on the Demon 340 by assembling and painting the engine. I cued up my Mopar painting guide and it said blue. The instructions said orange and I Googled what color it should be and it depends on when the engine was built. As you can see, I painted the engine orange. I spent some time dry fitting various parts and pieces and studying the instructions and now I am ready to go and assemble this kit. 3 Quote Link to comment Share on other sites More sharing options...
mrmike Posted April 30 Author Share Posted April 30 Been working on the Demon 340. I got the engine assembled and it is waiting for plug wires and some plumbing. I replaced the distributor since I ruined the kit distributor trying to drill it out for plug wires. The rear end assembly has been paint detailed including Alclad II Chrome paint for the exhaust tips. I wrapped the pipes with tape and lightly sprayed the exhaust tips and they came out excellent! I started on the chassis and I mocked up the rear end assembly on the chassis. 5 Quote Link to comment Share on other sites More sharing options...
mrmike Posted May 1 Author Share Posted May 1 I fired up the paintbooth and the paint was flying today! I painted the body and hood, the chassis, the interior and some random parts with my spray cans. 6 Quote Link to comment Share on other sites More sharing options...
mrmike Posted May 2 Author Share Posted May 2 One thing missing from this and many other kits is the ignition coil. I went and made one for this kit since this is not one in the kit. I used a piece of sprue painted black and wrapped a piece of Bare Metal Foil around it. I drilled a hole in the middle of the sprue for a length of ignition wire and glued it in place on the engine manifold. 2 Quote Link to comment Share on other sites More sharing options...
ksnow Posted May 2 Share Posted May 2 Nice work on the coil. Quote Link to comment Share on other sites More sharing options...
deuces wild Posted May 3 Share Posted May 3 🙂👍 Quote Link to comment Share on other sites More sharing options...
slusher Posted May 3 Share Posted May 3 Really nice work, I will be following buddy! Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted May 3 Share Posted May 3 Looking great! Quote Link to comment Share on other sites More sharing options...
mrmike Posted May 3 Author Share Posted May 3 (edited) Thanks Kyle, Guido, Carl and Dann! Edited May 3 by mrmike 1 Quote Link to comment Share on other sites More sharing options...
mrmike Posted May 3 Author Share Posted May 3 The chassis is almost complete. I usually forget to paint the side view mirrors, but not this time. I forgot the rear bulkhead, core support and the front valance. Bummer! Out comes the paint and primer. 2 Quote Link to comment Share on other sites More sharing options...
mrmike Posted May 5 Author Share Posted May 5 I painted my missing parts and I decal the dash, but the decal didn't settle into the dash like I hope it would. The speedo and gauges were too tall and I used a lot of setting solution just to get the decal were it is. I have seen pics of one, but I have never actually seen a manual shifter with a console on an A body car. Quote Link to comment Share on other sites More sharing options...
Moparman18064 Posted May 6 Share Posted May 6 7 hours ago, mrmike said: I painted my missing parts and I decal the dash, but the decal didn't settle into the dash like I hope it would. The speedo and gauges were too tall and I used a lot of setting solution just to get the decal were it is. I have seen pics of one, but I have never actually seen a manual shifter with a console on an A body car. When they retooled this kit, they should have eliminated the console, or make it optional. A bodies dropped having consoles for 4 speeds at the end of 1969. I wonder if you carefully sliced the decal where the wood grain meets the gauge if it would lay in there better. It might be too brittle now though. I will have to keep that in mind when I build one of mine. What color orange is that? In some of the pics it almost looks like vitamin c. 1 Quote Link to comment Share on other sites More sharing options...
drodg Posted May 6 Share Posted May 6 Those decals are a bit of a nightmare on the dash. I used the decals from The Last Detail. Old, but they worked for the dash. Keep the good work up Quote Link to comment Share on other sites More sharing options...
drodg Posted May 6 Share Posted May 6 This might be a better alternative for the dash https://www.ebay.com/itm/204771885722?itmmeta=01HX76MRYX61ZSV3M5R20K2F5B&hash=item2fad5b029a:g:QMkAAOSwHMJaLgSE&itmprp=enc%3AAQAJAAAA4KRubnlMMYr3uo8wWEqqNnH7NMnKo5KRDAPZ0hLrdBWJr1lVi91XrHu5PCp76ZT0pwvXYC5Cz5hHe0gV3D80PZn%2B%2BnSdsEaWJMg%2BtZ1Gb3UbrfcfJkSolidLUAbTefDx%2F1ys4lmMts%2BcJLoCci5dnqsfRUgaxw%2BQhqo0pL80erXAhoYALf5fEFGITh3rl1gxUzddy0RzLk6IxhEl2bVp3kjkZwmKmAbH3rjKpE7IMD59CIA%2FElu7V%2FFw2TEtU74MjQ6v0CxPvcPCZas8KK23VfDspL2%2FmTZ9dVfi4cr4d9jm|tkp%3ABk9SR8aP0-bpYw 1 Quote Link to comment Share on other sites More sharing options...
slusher Posted May 6 Share Posted May 6 rNice progress, Mike! Quote Link to comment Share on other sites More sharing options...
mrmike Posted May 6 Author Share Posted May 6 14 hours ago, Moparman18064 said: When they retooled this kit, they should have eliminated the console, or make it optional. A bodies dropped having consoles for 4 speeds at the end of 1969. I wonder if you carefully sliced the decal where the wood grain meets the gauge if it would lay in there better. It might be too brittle now though. I will have to keep that in mind when I build one of mine. What color orange is that? In some of the pics it almost looks like vitamin c. Rich, the color is Model Master Hemi Orange Lacquer. The decals are on with a lot of setting solution. Thanks Rick, David and Carl! 1971 Dodge Demon 340 I have finished the chassis and the interior. I should have painted the wood grain on the dash and then used the individual decals in place of the entire decal strip. The body is next! 3 Quote Link to comment Share on other sites More sharing options...
Kenmojr Posted May 6 Share Posted May 6 Nice work... Quote Link to comment Share on other sites More sharing options...
mrmike Posted May 8 Author Share Posted May 8 Thanks Ken! Quote Link to comment Share on other sites More sharing options...
mrmike Posted May 20 Author Share Posted May 20 I have finished my '71 Demon 340 and it is posted in Under Glass. I would like to thank all those who have taken the time to view and to comment on my WIP. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.