Oldboychas Posted November 18, 2009 Share Posted November 18, 2009 Hi everyone, I have read a little about but have not seen a photoetched saw blade up close. Are they thinner than a exacto blade? Do they work well? Are they worth the cash outlay? Any and all responses are appreciated, thank you! Enjoy the day, Charlie Quote Link to comment Share on other sites More sharing options...
Lownslow Posted November 18, 2009 Share Posted November 18, 2009 Hi everyone, I have read a little about but have not seen a photoetched saw blade up close. Are they thinner than a exacto blade? Do they work well? Are they worth the cash outlay? Any and all responses are appreciated, thank you! Enjoy the day, Charlie theyre very worth the money and theyre about as thin as #11s Quote Link to comment Share on other sites More sharing options...
Foxer Posted November 18, 2009 Share Posted November 18, 2009 Someone posted photos of those saws in this thread about opening doors. Quote Link to comment Share on other sites More sharing options...
Greg Cullinan Posted November 18, 2009 Share Posted November 18, 2009 Charles,Good question.I also see those for sale everywhere and wondered if they were practical. I was wondering why the lack of a handle? Quote Link to comment Share on other sites More sharing options...
Brendan Posted November 18, 2009 Share Posted November 18, 2009 I used the saw blades all the time. They're great for scribing panel lines and cutting through pieces. They are thin and you can bend them if you're not careful. They will also cut all the way to the bone if you slip! Which I have done. I've never found a need to use them with a handle. Here's link to Strada Sports for Crazy Modeler. About halfway down the page, you'll see a couple of sets of their saws. They are definitely worth getting just to have around because you never know when you might need them. I use mine quite often. http://www.stradasportsstore.com/crazy%20modeler.html Quote Link to comment Share on other sites More sharing options...
Scott Colmer Posted November 18, 2009 Share Posted November 18, 2009 I've posted on these on more than one occasion. They are VERY good for cutting a very thin straight line. with a dremmel. If done carefully, it will be finer than scribing with a #11 blade. But - RESPECT THESE! They are Satan's ninja stars for model geeks and they have an insatiable taste for human flesh. If the blade has the slightest bend, thow it away. Always try to cut with the rotation driving the blade away from you. Go very easy on the pressure. Try to steady your hand on something. Remember your eye protection. Good luck Scott Quote Link to comment Share on other sites More sharing options...
Oldboychas Posted November 18, 2009 Author Share Posted November 18, 2009 Guys, Thanks for the info and the link. Next payday I'll try to put back a little extra so I can try them out. Although you have me a little hesitant with all of the blood and gore warnings.HEHEHE! Thanks again, Charlie Quote Link to comment Share on other sites More sharing options...
robertw Posted November 18, 2009 Share Posted November 18, 2009 I also find them very handy in removing sprue stubs in difficult spots. Shortly after buying a set I picked up some cheap x-acto style handles at the local dollar store and mounted the whole set so they're always handy. Since they're thinner then the actual x-acto saw blades they need to be treated with a little less vigor but they work great. I was like you when I first saw them and wondered how well they'd work or last but they've now become a must have tool on my bench. rob w Quote Link to comment Share on other sites More sharing options...
jbwelda Posted November 19, 2009 Share Posted November 19, 2009 (edited) i have never looked into these either, but i could see how the circular ones would be nice...i have a dremel buzz saw sort of attachment that believe me has saved my life a few times (or at least the models life!) and i could see how a thinner one would be nice, but the ones i am really interested in are these: so i take it each of those is a little saw, with very tiny teeth you cant really see in the photo? and so you remove them from the fret and just hold them to use them? those look like they might come in really handy sometime. >Shortly after buying a set I picked up some cheap x-acto style handles at the local dollar store and mounted the whole >set so they're always handy so they are made to mount in a normal xacto handle? Edited November 19, 2009 by jbwelda Quote Link to comment Share on other sites More sharing options...
Bernard Kron Posted November 19, 2009 Share Posted November 19, 2009 I've used both the circular saw blades meant to mount in a dremel: and the regular type which I mount in a handle as I would a #11 blade, the latter from Model Car Garage: The disc blades take some getting used to in order to get a controlled straight cut but are very quick and effective. As Scott pointed out RESPECT THEM!!! I swear by the fine photo etch straight saw blades. They come in various shapes for getting into small speces and for engaving fine lines. There just what's called for in order to remove the minimum of plastic from your cuts. In both cases, if you bend them throw them away! Quote Link to comment Share on other sites More sharing options...
Ddms Posted November 22, 2009 Share Posted November 22, 2009 ... they have an insatiable taste for human flesh. I have a set I bought from Crazy Modeler on eBay. They're a lot thinner than an X-acto saw. Seems to me that sawing with a PE saw is a lot safer than carving with a #11. Just maintain a steady pressure, as with any saw. And they don't have points, so there's no risk of stabbing or nicking yourself. They're meant to be held in a standard X-acto type handle. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.