gasser59 Posted March 20, 2011 Posted March 20, 2011 I've been working on replicating a stock car I used to watch as a kid growing up in Iowa at the Shelby County Speedway. I've only had a few pictures to use as reference so alot of this build is from memory. Built from the Black Widow kit. For a bit of interesting reading on this shop, check out swanson-automotive.com and under About Us, read the PDF file. Big challenge ahead is either finding a source for some fenderwell headers or making a set. It sure is tight in there for a set of these headers. As always, comments welcome.
dwc43 Posted March 20, 2011 Posted March 20, 2011 Looks great. Check out the Stones,Woods, and Cook Willy's. It has fender well type headers that you might be able to make work on it. Hard to say really without finding a pair and giving it a try.
dwc43 Posted March 20, 2011 Posted March 20, 2011 did anyone run the fenderwell style on the circle trackers? seems like they would have been in the way on the drivers side with the taller tires. very nice work so far! keep us posted It's the right side you need to worry about. In the day, and present too (at least on the dirt tracks) you run a smaller LF than the RF. Makes the weight and heat balance out that way. You do it to try and make the LF actually do some work. With the tall RF and the body roll or counter steering, that is the side I would worry about making contact. Here's a set of circle track fenderwell headers. The subject matter is 314 Y engine headers located at this link with pics near bottom of page. http://www.y-blocksforever.com/forums/Topic51816-3-1.aspx#bm51818
gasser59 Posted March 20, 2011 Author Posted March 20, 2011 (edited) Thanks for the comments guys. They are appreciated. Here's my only color photo reference and you can clearly see the fenderwells in the sunshine. Edited March 20, 2011 by gasser59
Danno Posted March 20, 2011 Posted March 20, 2011 Looking great, Brad! Even better in person. Keep it coming.
Greg Pugh Posted March 20, 2011 Posted March 20, 2011 First thing I'd like to say is "Thank You" for getting the trim holes all lined up and they seem to be the right size! It seems like that detail is always overdone and the time is never taken to get them lined up. On another note, if I could make a suggestion.....the door lock cylinder hole should be larger as should the door handle hole closest to the edge of the door. The door handle hole towards the front of the door is perfect size. But really though...Great Job!!
gasser59 Posted March 20, 2011 Author Posted March 20, 2011 Thanks for the suggestion Greg. That's what I love about this forum, everyone is so helpful. I'll get the aft door handle hole as well as the keyhole a bit larger. I kind of figured I'd need to make my own fenderwell headers. Not much space in there especially on the driver's side with the steering box as well as everything else in the way. Thanks everyone. This has been a fun build and a bit more to do.
dwc43 Posted March 20, 2011 Posted March 20, 2011 Thanks for the comments guys. They are appreciated. Here's my only color photo reference and you can clearly see the fenderwells in the sunshine. Those headers look like they hang down just like the ones I posted a pic of. Wonder if they are the same. lol Could not get that lucky could I.
dwc43 Posted March 20, 2011 Posted March 20, 2011 i know from running fenderwell style headers on my street cars that sat low with skinny tires that most times the tires and the headers are fighting for the same space. Tell me about it. I have a stroked big block Duster with fenderwells,as if there was any other choice. I'd like to run a taller tire for more roll out, but that aint gonna happen. If I raised the front for more clearance that would just cause more handling and traction problems, so I can't do that anyways. Sometimes your just stuck with what ya got.
gasser59 Posted March 20, 2011 Author Posted March 20, 2011 Too bad we just can't put those 1:1 headers of yours on the copier and scale them down to size. Sure would be easier than making a set from solder.
dwc43 Posted March 20, 2011 Posted March 20, 2011 (edited) Too bad we just can't put those 1:1 headers of yours on the copier and scale them down to size. Sure would be easier than making a set from solder. LOL!! You said it there. I have a few projects that need headers and I wished I could do that to them too. Edited March 20, 2011 by dwc43
gasser59 Posted April 14, 2011 Author Posted April 14, 2011 Im finally back to work on the stock car. Made solder headers that I'm happy with. This is the second set as there is a bit of a learning curve. Engine is now glued in and finally assembly of body to chassis can now take place. deadline is this Saturday for the Desert Scale Classic. Thanks for the kick in the pants for using solder. I'll be doing this again.
Danno Posted April 14, 2011 Posted April 14, 2011 Looking great, Brad! Good luck with your final push! See you Saturday.
gasser59 Posted April 16, 2011 Author Posted April 16, 2011 Thanks David. I just glued the front bumper on and that's the last piece to add. In reviewing the couple of pix I just took, I can't believe the amount of dust around here. Here's one for now. More after the weekend. As always comments welcome.
dwc43 Posted April 16, 2011 Posted April 16, 2011 Lookin good. No matter how much you clean there's still a lot of dust around. I have allergies so I have run an air purifier for a long time now. You'll be surprised how much dirt there is in the air we breath. You might want to visit Lowes and get one. Bigger they are the more they cost. I always get one that is bigger than the room you intend to use it in. Runs quieter and uses less filters that way. Mine has both a charcoal side and a regular cotton gauze type filter.
David G. Posted April 16, 2011 Posted April 16, 2011 Very cool build! I love the concept and the excellent engine detail. I can't wait to see it in person at the Desret Scale Classic today! David G.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now