Drake69 Posted May 24, 2011 Posted May 24, 2011 im using tim sherrys at hazzardousdecals.com .... Thank you... just bookmarked them!
MoparWoman Jamie Posted May 24, 2011 Posted May 24, 2011 thanks for the comment bro .. an no im not , im using tim sherrys at hazzardousdecals.com .... I use his decals also on some of my projects, I do highly recommend his decals. Davin, your doing a good job so far on your build here man. Keep up the good work.
Drake69 Posted May 24, 2011 Posted May 24, 2011 I use his decals also on some of my projects, I do highly recommend his decals. Davin, your doing a good job so far on your build here man. Keep up the good work. Yeah... I've got a Nova that's SCREAMING for some "Death Proof"... /thread hyjack...
mikelo Posted May 24, 2011 Posted May 24, 2011 I like the progress so far. You have done a lot of nice work and I am getting tips as you go. I would like to offer a tip at this point you are at. For some reason, I am not sure why, but the photo etched headlight doors appear to need a backing on them. You can not see through the headlight doors on the 1:1. Once again, I am not sure why they did that, but at least you are not too far along to correct it. I am looking forward to watching your progress. Keep up the good work. Mike
mopar01lee Posted May 24, 2011 Author Posted May 24, 2011 Yeah ive been thinking about the headlight covers... And I would like to make a set up to were they flip up and are functional.... I may look in to doing that ive had this idea for a wile .... Well see if I can pull it off ..... Lol
mopar01lee Posted May 25, 2011 Author Posted May 25, 2011 Ok i took a big leep with this , but it turns out it works awsome.... i made the head light covers functional.... yeeeee hawwwww..lol heres some pics.... ok there it is. It still needs a few tweeks here and there but it will work just fine ... Later Days ...Davin
RodneyBad Posted May 25, 2011 Posted May 25, 2011 where's the headlights? When you drive at the speed of light, Do you need headlights? PE Grill is looking great and I like the headlight doors. PE Steering wheel is looking good. Roll cage looks great. Nice work still...
mikelo Posted May 25, 2011 Posted May 25, 2011 Very slick way to correct the cover pieces. Plus it is close to 1:1. If it helps, there was 1 square bar that operated both headlight doors from a motor in the middle. So you could make them open together & be accurate! Nice job. Mike
MoparWoman Jamie Posted May 25, 2011 Posted May 25, 2011 Very slick way to correct the cover pieces. Plus it is close to 1:1. If it helps, there was 1 square bar that operated both headlight doors from a motor in the middle. So you could make them open together & be accurate! Nice job. Mike Mike, your talking about the 1970 Charger head light doors. The 1968 - 1969 ran on vac power and each head light had it's own vac powered pod's.
old gearhead Posted May 25, 2011 Posted May 25, 2011 Lot of detail here and coming together well. Looks like you're having a lot of fun with this build. PB.
mopar01lee Posted May 26, 2011 Author Posted May 26, 2011 quick update .... both covers ruffed in and ready to be finished... now time to find small LED lights to make working head an tail lights... Later days ....Davin
mopar01lee Posted May 30, 2011 Author Posted May 30, 2011 Quick update... got the interior flocked today ... heres some pics.. im still working on the head lights.. there coming right along an found some LEDS . i just have to modify the covers to acomidate the lights.. Later Days...Davin
UltraReef Posted May 30, 2011 Posted May 30, 2011 Wow! Great build Davin. Thank you for taking time to post these pics and creating the thread in the first place. This is going to be one legendary car when you're done. -Earl Quick update... got the interior flocked today ... heres some pics.. im still working on the head lights.. there coming right along an found some LEDS . i just have to modify the covers to acomidate the lights.. Later Days...Davin
mopar01lee Posted June 12, 2011 Author Posted June 12, 2011 (edited) sorry for no update .. ive had a wedding to go to 6 1/2 hrs away from home ... i have had a ton of paint problems the body came out good , but the doors,hood,trunk,front and rear peices.. got messed up so i stripped them an put a mix in the airbrush . well it got messed up .. So im stripping everything and i have some custom mixed ppg race hemi orange and clear coming monday... but i will have a small update tonight or tomarrow.... im also waiting on some aluminum mopar performance valve covers ( sould be here this comin week ).. so i can start the engine.. Decals finaly came in after a month .. but no good paint to put them on.. later days ....Davin Edited June 12, 2011 by mopar01lee
hemi Posted June 12, 2011 Posted June 12, 2011 Well aside from the troubles you are doing a great job.Keep it up man.
mopar01lee Posted June 13, 2011 Author Posted June 13, 2011 (edited) Small update the body is in the bath an almost clean of paint an primer.. Got some PE work done . window cranks and seat belts.... fuel line ran down the chassie..... detailed the vectors a lill bit more.. roll cage modded and painted , console painted , an dash.... dash is not done yet got a lill more detailin to do .. thanks for looking an the comments.. Later days .. Davin Edited June 13, 2011 by mopar01lee
moparmagiclives Posted June 13, 2011 Posted June 13, 2011 I got tierd of reading all the back and forth about the door issue, so I jumped to the end. Just wanted to add my 2 cents. about 15 years or so ago, I ran across one of the studio cars (#11 i think, or 1#2 maybe) I was 15 at the time, so I was all over it. The owner came up to me and asked if I wanted to sit in it...well duh. But He said I had to "Duke It" and go in the window. I said "because its welded?" He replyed " No, but after so many stunt jumps the doors wont clear the front fenders. Nice guy, great car. But I have to agree with alot of people that as a movie replica, I dont think the doors should open...But killer model non the less, great build. I just got my own mpc tin set. Cant wait to get it open.
mopar01lee Posted June 14, 2011 Author Posted June 14, 2011 Thanks for the comments ... As for this build ( no offense here ) but if you kept reading all that babble, you would kw that im not building a replica. Im doing a detailed general with as many details as I can put in it ...not movie or show details , but details you would find on any car ....but alot have mistaken this build for an accurate an a replica ...and its not , its the way I wanna build it ...to push my skills to the limit .....lol Thanks again for the comments .... Later days .... Davin
RodneyBad Posted June 14, 2011 Posted June 14, 2011 Interior is looking good. Rollcage come out nice. Wheels look Perty good.
mopar01lee Posted June 24, 2011 Author Posted June 24, 2011 not much of an update.. still waiting on parts. I did get the paint today an im perty pi--ed off , i talked to the paint dude an told him i wanted some race hemi orange .. or a color close to the general lee. his responce yeah ok i can do that i kw a color that word work just fine .. bull poop.. what i got is 4oz of EV2 or 69-72 HEMI ORANGE effect.. in other words a metalic hemi orange , not race hemi orange witch is a solid color .. well heres the paint .. im going to go ahead an paint it this color cuz i do like it . it just not what i ordered..lol i also got the head liner painted ... Later Days ..Davin
bandit1 Posted June 24, 2011 Posted June 24, 2011 not much of an update.. still waiting on parts. I did get the paint today an im perty pi--ed off , i talked to the paint dude an told him i wanted some race hemi orange .. or a color close to the general lee. his responce yeah ok i can do that i kw a color that word work just fine .. bull poop.. what i got is 4oz of EV2 or 69-72 HEMI ORANGE effect.. in other words a metalic hemi orange , not race hemi orange witch is a solid color .. well heres the paint .. im going to go ahead an paint it this color cuz i do like it . it just not what i ordered..lol i also got the head liner painted ... Later Days ..Davin nice "baby blue" fox mustang! tell us alittle more about it if you please???
mopar01lee Posted July 1, 2011 Author Posted July 1, 2011 (edited) Small update .. got the body stipped an painted again.. just wet sanded it tonight .gonna put 2 more coats on then decals an clear..lol Also got the headliner painted but no pics yet .. hope you enjoy ..its been a pain with the paint on this thing , but im sure i got it handeld..lol Later Days..Davin Edited July 1, 2011 by mopar01lee
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now