John Posted August 7, 2007 Posted August 7, 2007 I saw this in their catalog and it pictured on there display cast box but have not been able to find out anything else. The kit is the be based on the Testors kit and Im really looking forward to it. Thanks for any help.
SteveG Posted August 7, 2007 Posted August 7, 2007 I saw this in their catalog and it pictured on there display cast box but have not been able to find out anything else. The kit is the be based on the Testors kit and Im really looking forward to it. Thanks for any help. My source at Lindberg says that they are currently in production. Hopefully I will have a sample to post some photos of in a few weeks if all goes well. -Steve
41CHEVY Posted August 7, 2007 Posted August 7, 2007 Lindberg has it listed #73065. TBA Lindberg and Testers are doing kits together. The Hawk Hemi is a Testers kit. PAUL
John Posted August 7, 2007 Author Posted August 7, 2007 Thanks for the update guys. I have been waiting for this kit and hope to do a good decal sheet for the Daytona and Super Bee's, complete with chrome emblems and everything. John
SteveG Posted October 31, 2007 Posted October 31, 2007 This just arrived at my door step. Here's a quick look at some of the kit contents....... For more photos check out the link below. More Charger Super Bee SRT8 photos -Steve
miatamadman Posted October 31, 2007 Posted October 31, 2007 Hey Steve, Any word on the police versions release?
Zoom Zoom Posted October 31, 2007 Posted October 31, 2007 Thanks for the pics! Do you know if the wheels/tires are the correct size? Any chance you can measure the outside diameter of the wheels (to the lip, not the rib that holds the tire)? If they're correctly sized to the 1:1's 20's they should be anywhere from .875"-.915", as you add an extra inch or two to account for the retaining lip for the tire. I'm hoping they didn't keep the 18" diameter from the earlier R/T & Daytona versions. A previous test shot photo from another toy show looked like that was the case. The wheels on my Daytona model are .81" diameter.
VictorSmalls Posted October 31, 2007 Posted October 31, 2007 Looks like a very nice kit. I will be keeping an eye out for this one.
SteveG Posted October 31, 2007 Posted October 31, 2007 Thanks for the pics! Do you know if the wheels/tires are the correct size? Any chance you can measure the outside diameter of the wheels (to the lip, not the rib that holds the tire)? If they're correctly sized to the 1:1's 20's they should be anywhere from .875"-.915", as you add an extra inch or two to account for the retaining lip for the tire. I'm hoping they didn't keep the 18" diameter from the earlier R/T & Daytona versions. A previous test shot photo from another toy show looked like that was the case. The wheels on my Daytona model are .81" diameter. Bob, The O.D. of the wheels are .905 and the I.D. of the tires are about .866 so I would say they are pretty close to scale 20's. The tires are definately lower profile then the R/T version and don't have that heavy edge tread either. No release date on the Police Version but I was assured they are still coming. I'm going to try to beg, borrow or steal a test shot of one as soon as they run them. -Steve
Zoom Zoom Posted October 31, 2007 Posted October 31, 2007 Steve, thanks for the reply. Sounds like they got the size correct Nice to know a Revell Magnum isn't required for the wheels/tires. Be that as it may, the one I'm really looking forward to is the police car.
ghansel98 Posted October 31, 2007 Posted October 31, 2007 No one has asked the most important question of all....WHERE CAN I GET ONE!!! I've checked all the usual places online with no luck...
Rob Hall Posted October 31, 2007 Posted October 31, 2007 No one has asked the most important question of all....WHERE CAN I GET ONE!!! I've checked all the usual places online with no luck... I ordered mine from my usual online source, Evers Toy Store...www.everstoystore.com. $15 + shipping. Model Express has it for pre-order currently also.
blubaja Posted November 10, 2007 Posted November 10, 2007 Got this one today:) The only bad part I've found is there is no "SRT" engraving on the wheels:(
RJWood Posted November 12, 2007 Posted November 12, 2007 I bought mine today at the Kit Collectors swap meet. can't wait to start it. I have a question about the paint color. Does anyone know of a match for it in Testors or Tamiya paints, as these are the easiest to get. thanks, Ron.
Raul_Perez Posted November 12, 2007 Posted November 12, 2007 Steve, Thanks for the pics!! Now I now what modern muscle car I'll try to build for the next Santa Clara NNL...
SteveG Posted November 12, 2007 Posted November 12, 2007 If your planing to detail this kit out, Keith Marks has a great looking Charger Super Bee SRT8 decal sheet and lots of refefence photos like the samples belows. Click on the link for a look at his decals and more photos Decals and photos from Keith Marks -Steve
RJWood Posted November 13, 2007 Posted November 13, 2007 (edited) Thanks for the link and decal info. Steve, I dident know it comes in blue. I want to do mine in what will probably be the most popular color for the 1:1 YELLOW Thanks, Ron Edited November 13, 2007 by RJWood
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now