James2 Posted June 16, 2013 Share Posted June 16, 2013 (edited) We are going through a relocation and have packed up almost all of the models and tools for the move. But in the mean time I thought I would keep this one out for my plastic fix! Inspired by a custom ranch truck model in SA Enthusiast, 1998. It was my first real attempt at Body modifications (open door not hinged), chassis mods and drive line swaps. Metalizer paint where new to me and polishing paint was for cars not models! But I thought I would try that as well. I smoothed the fenders, sectioned the cab and cut the hood down. The 50 Ford was combined with a Boyd's Smoothster. This model has gone through some rough handling over the years and has collected quite a bit of dust. I have always wanted to restore it so here we go. The tires shrunk up and cracked, the glue is brittle and showing, the paint needs something and I would like to detail the engine more. Any way take a look and let me know what you think. Edited November 30, 2013 by James2 Quote Link to comment Share on other sites More sharing options...
bpletcher55 Posted June 16, 2013 Share Posted June 16, 2013 MAN THAT HAS ALL THE RIGHT STUFF ,THOSE TIRES ALL WAYS SPLIT ,TO BAD THAY ARE COOL,CANT WAIT TO SEE HER PUT BACK TO GATHER , Quote Link to comment Share on other sites More sharing options...
Jantrix Posted June 16, 2013 Share Posted June 16, 2013 I think this looks great. The sectioning on the hood looks remarkably well done. Looking forward to seeing the new version. Quote Link to comment Share on other sites More sharing options...
Joker Posted June 17, 2013 Share Posted June 17, 2013 Don't know why the History channel show "American Restoration" comes to mind. Quote Link to comment Share on other sites More sharing options...
James2 Posted June 17, 2013 Author Share Posted June 17, 2013 Thanks guys. Hard to believe I built this one 15 years ago! I always thought the bed needed something more. Last evening I bit the bullet and shortened it up 1cm. And flipped the fenders around to keep the wheel base the same. I'll notch the running boards and post pix later, I think it looks pretty good. I guess this should be considered more than restored now? Quote Link to comment Share on other sites More sharing options...
slusher Posted June 17, 2013 Share Posted June 17, 2013 That was a very cool build James, love the chassis. looking forward to the rework of this build... Quote Link to comment Share on other sites More sharing options...
gonzo64nova Posted June 17, 2013 Share Posted June 17, 2013 This truck has tons of potential, like Blair said you have all the right ingredients. Good luck. - Bill Quote Link to comment Share on other sites More sharing options...
crazyrichard Posted June 17, 2013 Share Posted June 17, 2013 sweeeet !! Quote Link to comment Share on other sites More sharing options...
James2 Posted June 19, 2013 Author Share Posted June 19, 2013 Thanks guys, here are a few pix of a lose mock up. I shortened the floor boards, flipped and tacked the rear fenders and set it on the chassis. The wheel base fits perfectly! I may not be working on anything for a while, as I said we are getting ready to move. But I will keep this one close to the top of the boxes... Quote Link to comment Share on other sites More sharing options...
James2 Posted July 14, 2013 Author Share Posted July 14, 2013 Been busy relocating, but have much of that out of the way now. Here is a little progress I have managed to accomplish. Molding the fenders in, filing the fender to accept the tires and hinged the driver door. (Instead of gluing in position) Also made a new bed cover and roll pan for the tail end. Thanks for the interest... Quote Link to comment Share on other sites More sharing options...
exesivefire Posted July 15, 2013 Share Posted July 15, 2013 This is really cool, love the new updates! Quote Link to comment Share on other sites More sharing options...
my name is nobody Posted July 15, 2013 Share Posted July 15, 2013 a beautiful project with loads of potential. Quote Link to comment Share on other sites More sharing options...
James2 Posted July 17, 2013 Author Share Posted July 17, 2013 Thanks guys.... Quote Link to comment Share on other sites More sharing options...
James2 Posted July 21, 2013 Author Share Posted July 21, 2013 I found time to smooth things up a little, add some cool tail lights from my parts box, hinge the hood and apply a little Tamiya primer. I also made a panel for under the hood that will get BMF. Thanks for the interest... Quote Link to comment Share on other sites More sharing options...
cavemanx Posted July 22, 2013 Share Posted July 22, 2013 Looking good. Quote Link to comment Share on other sites More sharing options...
Wonderbread Kustomz Posted July 26, 2013 Share Posted July 26, 2013 James, you do some awesome work.. I love what you have done so far. Keep it up! Quote Link to comment Share on other sites More sharing options...
James2 Posted July 26, 2013 Author Share Posted July 26, 2013 Thanks James! I'm working on the chassis waiting on the body paint. Quote Link to comment Share on other sites More sharing options...
crazyrichard Posted July 27, 2013 Share Posted July 27, 2013 awsome !! i love this one Quote Link to comment Share on other sites More sharing options...
Gluhead Posted July 27, 2013 Share Posted July 27, 2013 With the heavy sectioning of the hood and the appearance of the rear axle being pushed back, I fully expect one of those "Oh look, no engine!" hood-up shots and an accompanying "Here it is!" shot of a Toro drivetrain sitting in the box. And if that's not what you're doing, I may have to steal the idea for myself. Quote Link to comment Share on other sites More sharing options...
James2 Posted July 27, 2013 Author Share Posted July 27, 2013 Thanks Richard. No the engine will be in the normal location, feel free to try your idea! Quote Link to comment Share on other sites More sharing options...
slusher Posted July 28, 2013 Share Posted July 28, 2013 Real nice work and progress James. l enjoy seeing your work.......... Quote Link to comment Share on other sites More sharing options...
James2 Posted July 28, 2013 Author Share Posted July 28, 2013 Thank you Carl, and I yours as well. Quote Link to comment Share on other sites More sharing options...
JasonFL Posted August 1, 2013 Share Posted August 1, 2013 Really like what your doing here. Flipping the rear fenders was money! Looking forward to seeing this one done, keep up the good work. Quote Link to comment Share on other sites More sharing options...
James2 Posted November 17, 2013 Author Share Posted November 17, 2013 Had a little window of warmer weather so I got a good base on the Ford yesterday... Wet sanding and final paint to follow.... Quote Link to comment Share on other sites More sharing options...
bpletcher55 Posted November 17, 2013 Share Posted November 17, 2013 LOOKS SHARP! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.