Car Crazy 81 Posted September 18, 2013 Posted September 18, 2013 This is my first attempt at building a AF/X car. First order of business was to get that Ford 427 SOHC shoehorned into the engine bay i had to modify the shock towers in order for the engine to clear and also i'd radisued the rear wheelwells for clearance for the slicks. Im gonna need some pointers on this build beings this is my first time building this i wanted to be as accurate as possible. Heres some reference pics of what i had in mind and the build as well.
Dragracer Posted September 18, 2013 Posted September 18, 2013 Looks like she's coming along nice Rick!, hope to see some more!
Mike Kucaba Posted September 18, 2013 Posted September 18, 2013 Good start! I don't know how correct you want to get, but those cars had a unique front suspension where the coil springs were replace by a flat leaf on either side. Google Mustang AFX front suspension and see what comes up. It may not apply to the one your using for reference though as that was done on the cars supplied to the Ford sponsored racers.
brett Posted September 18, 2013 Posted September 18, 2013 Mike, definately looks like a leaf from here, in front of and behing the front wheels on the last two pics you can just see it, good call.
doggie427 Posted September 19, 2013 Posted September 19, 2013 (edited) This car was an original A/FX equipped with a wedge ( because the SOHC was in short supply). These factory cars were supposed to have a 2% wheelbase shift max by the NHRA rulebook.(about 3''in real life or 3mm in scale). If you examine the photo of the Larsen Ford car, you will see the lip of the rear wheel opening is very close to the cove rear edge.(it was actually moved about 4") The front isn't as noticeable because of the larger than stock wheels/tires (and the fact they were moved slightly less). Since Mustangs were fairly new in '65 an extra inch or so was hard for a tech guy to pick up on. At the Winternats. when they debuted they all had carbs with bubble hoods. Edited September 19, 2013 by doggie427
iBorg Posted September 19, 2013 Posted September 19, 2013 That is SOOOOO right looking. Can you tell me what body you're using. I'm guessing AMT. Mike
Car Crazy 81 Posted September 19, 2013 Author Posted September 19, 2013 That is SOOOOO right looking. Can you tell me what body you're using. I'm guessing AMT. Mike Mike, The kit im using is the Revell 65 Mustang Fastback.
DrKerry Posted September 19, 2013 Posted September 19, 2013 Actually, not sure if it's the right year car as this one. I just did a Bing search for "larson ford Long Gone" and the first black and white image looks to be coil over. Not decerning ya guys but it may take a bit of research on the particular car.... Not trying to poke a bee hive, just saying what I saw... http://crick.smugmug.com/Cars/1960s-Racing-Pics/i-6H2JhMg/0/L/Larson%20Ford_Long%20Gone%20AFX-L.jpg
Mike Kucaba Posted September 19, 2013 Posted September 19, 2013 The "leaf springs" I mentioned, are more apt to be referred to as a form of torsion bar(s). they were fastened somehow to the lower control arm and ran forward to somewhere on the frame. I have a better pic and description in an older issue of SSDI. I'm disappointed that in all the images I looked at on Google, I couldn't find one pic or good exploded view.
DrKerry Posted September 20, 2013 Posted September 20, 2013 The "leaf springs" I mentioned, are more apt to be referred to as a form of torsion bar(s). they were fastened somehow to the lower control arm and ran forward to somewhere on the frame. I have a better pic and description in an older issue of SSDI. I'm disappointed that in all the images I looked at on Google, I couldn't find one pic or good exploded view. LOL, darned Google anyway!!!! I think I know what your talking about Mike. In the black and white photo you can see remnants of the stock suspension. I thought you and Brett were talking actual arched leaf springs like on most gassers back in the day...
doggie427 Posted September 20, 2013 Posted September 20, 2013 (edited) A few pics of the front end flat torsion springs and some useful info on the original setup of these cars. Edited September 20, 2013 by doggie427
Car Crazy 81 Posted September 20, 2013 Author Posted September 20, 2013 A_FX Image003.jpgA_FX Image005.jpgA_FX Image006.jpgScanImage007.jpgA_FX Image008.jpgA_FX Image009.jpg A few pics of the front end flat torsion springs and some useful info on the original setup of these cars. Im planning on building the Larsen Ford Long Gone Mustang. Thanks for the reference pics this is very helpful on this build.
90lowboy Posted September 20, 2013 Posted September 20, 2013 nice, can't to see finished... this car was from my area.
Mike Kucaba Posted September 20, 2013 Posted September 20, 2013 Fabulous pics Wayne!! I sometimes hesitate to post comments without documentation Where do I send the check(or kits). Thank you!
doggie427 Posted September 20, 2013 Posted September 20, 2013 Fabulous pics Wayne!! I sometimes hesitate to post comments without documentation Where do I send the check(or kits). Thank you! No problem Mike ...I'm like you, my memory sometimes fails me and I am hesitant to make a post without a little backup. LOL Now I have to find the other pics !
fordflashback Posted January 21, 2014 Posted January 21, 2014 The only '65 H&M built car that had the front wheels moved forward was Dick Brannan's Bronco.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now