Ira Posted October 22, 2013 Posted October 22, 2013 (edited) JEDI TIE WING RACER! I decided to make a Streamlined Space Ship using the Main Body from the X-Wing Fighter and the Wings from the Tie Interceptor. I also got some of the Engine Parts from the B-Wing Fighter. These are Snap Kits but I remove the ends of the Snap-Posts so they don't snap anymore. Now they are Glue It Together Kits. More Coming... Edited December 17, 2013 by Ira
Ira Posted October 22, 2013 Author Posted October 22, 2013 TIE WINGS! I started with the Tie Wings. First I had to cut this section off both wings. I cut the sections off and then I started to sand the High Spots off flat so I could glue the Wings together. I sanded off enough raised detail so that the Wings fit together nice and tight. Here are the Wings glued together. More Coming...
Ira Posted October 22, 2013 Author Posted October 22, 2013 HERE WE GO! This will be a pretty quick build. I measured the Wings up against the Body and marked the Sections to be removed, to clear the Wings. Here are the Sections cut out. Here is a mock-up to give you an idea of what the Jedi Hybrid Ship will look like. Side View. More Coming...
1930fordpickup Posted October 22, 2013 Posted October 22, 2013 May the force be with you IRA !!! Had to say it . This is going to be cool!
Ira Posted October 23, 2013 Author Posted October 23, 2013 Oh boy, oh boy, oh boy ! : ) Hey Ray! This one will just be a quickie...
mustang1989 Posted October 23, 2013 Posted October 23, 2013 Uh, oh! Imagination overload again! Hey man ya gotta hand it to him. Its creative!
Ira Posted October 25, 2013 Author Posted October 25, 2013 May the force be with you IRA !!! Had to say it . This is going to be cool! Thanks Andy!
Ira Posted October 25, 2013 Author Posted October 25, 2013 (edited) FOUR BIG ONES! I am combining the X-Wing, B-Wing and Tie Wing Engine Technologies for Super High Speeds. The Hyperspace option is also included in this Experimental Racer! The Four Thrusters are from the Star Wars B-Wing Fighter. I am going to mount them on the rear panel of the X-Wing Body. I cut out these areas in the underside for intakes. Fine Brass Screen will probably fill these openings. More Coming... Edited October 25, 2013 by Ira
Ira Posted October 25, 2013 Author Posted October 25, 2013 Uh, oh! Imagination overload again! There is no stopping us now...
Edward Gore Posted October 25, 2013 Posted October 25, 2013 Awesome build again. I thought you were going to put screens in the four round thrusters. Then I thought, (I wonder where you can get small round screens to put in those?) uh, never mind…
Ira Posted October 26, 2013 Author Posted October 26, 2013 (edited) JEDI NOSE JOB! I decided to Sand down the Ridges on the Nose to give it a Smoother, Sleeker Look. Here it is after a lot of Sanding... I filled the holes with pieces of plastic and glued them in with Zap-A-Gap. Then I used Squadron Putty to fill the gaps. More Coming... Edited October 26, 2013 by Ira
Ira Posted October 26, 2013 Author Posted October 26, 2013 Hey man ya gotta hand it to him. Its creative! That's Right! Just Exercising the Imagination...
slusher Posted October 26, 2013 Posted October 26, 2013 Another cool and creative project. You da man lra.
Ira Posted October 27, 2013 Author Posted October 27, 2013 Kitbashing Star Wars. Gotta love it! Dale Thanks Dale! Yep, This is Great Fun...
Ira Posted October 27, 2013 Author Posted October 27, 2013 COOL CANARDS! Dolores suggested adding wings up front. These are what I came up with. They were from a Big Jet Kit. I used Zap-a-Gap to glue the Canards on the inner groove of the bottom Body Half. Then I cut slots in the top Body Half to fit around the Canards. Here they are in place. More Coming...
mustang1989 Posted October 27, 2013 Posted October 27, 2013 ...........and its kit bashing time!! Looks like they were practically made for this kit!!
Ira Posted October 27, 2013 Author Posted October 27, 2013 Awesome build again. I thought you were going to put screens in the four round thrusters. Then I thought, (I wonder where you can get small round screens to put in those?) uh, never mind… Thanks Edward! I think you can find little screens at the hardware store...
Ira Posted October 28, 2013 Author Posted October 28, 2013 NEW COLOR! I finished the body work and applied some White Primer. Then I sprayed on a few coats of Tamiya Flat Yellow... More Coming...
Ira Posted October 28, 2013 Author Posted October 28, 2013 Another cool and creative project. You da man lra. Thanks Carl!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now