Jordan White Posted January 18, 2014 Share Posted January 18, 2014 (edited) I've been trying to determine for a while how I wanted to build this kit, and I finally decided to build it factory stock. I'm not really a fan of doing this in smaller scale, but in large scale it seems a bit more interesting since you can easily add more detail. The kit is the Doyusha 1/12 scale 1978 Corvette that I got a while back. It's a '78 based on (besides the license plate on the box top) the seats and the single-snorkel intake ('79 models had different split-back seats and dual-snorkel intakes on both engines). The engine as modeled is the base L-48 5.7 liter (350ci) making around 185hp, while the engine I'm going to be replicating is the uplevel L-82 5.7 liter making around 220hp (it also has the aforementioned dual-snorkel intake). Problem is, with these Doyusha/Otaki kits, the engines are somewhat off in their proportions. Could be because they didn't have a real one to model after, or more likely because these kits were able to be motorized (full detail, however the driveshaft is hinged to rotate and the rear axle is designed as one piece with larger differential to fit a geared axle). Because of this, I decided to use the engine and transmission out of the recently released Foose Camaro kit. The 302 is just a 327/350 block with a 283 crankshaft, so visually it will be exactly the same. I will be using a few parts from the Doyusha engine, such as the exhaust manifolds and distributor. Another issue that I'll have to deal with is from the other build I've seen, it appears that the rear end sits a little low, and the track width on both the front and rear is a tad too narrow. Anyways, on to the pics! The kit: The engine and transmission so far: I figured it would be easier to paint and detail if the transmission is separated from the engine. Oh, and the color I'm going with is, of course, Corvette Yellow! Edited November 14, 2015 by Jordan White Quote Link to comment Share on other sites More sharing options...
Craig Irwin Posted January 18, 2014 Share Posted January 18, 2014 Cool, my first new car was a 78 Corvette L-82 4-speed, dark blue with oyster cloth interior. Quote Link to comment Share on other sites More sharing options...
Jordan White Posted January 18, 2014 Author Share Posted January 18, 2014 That's cool! I was trying to determine what interior color would go best and decided just to go with the black leather, both because it contrasts with the exterior and it's the easiest to replicate. Quote Link to comment Share on other sites More sharing options...
slusher Posted January 18, 2014 Share Posted January 18, 2014 Black interior will look real good on a larger scale. I would use a semi black.. Quote Link to comment Share on other sites More sharing options...
cobraman Posted January 18, 2014 Share Posted January 18, 2014 I will be watching. I had a yellow 80. Quote Link to comment Share on other sites More sharing options...
Len Woodruff Posted January 19, 2014 Share Posted January 19, 2014 I love it. I have 2 of these kits. Quote Link to comment Share on other sites More sharing options...
Jordan White Posted January 20, 2014 Author Share Posted January 20, 2014 Attempted to convert the standard style 4-bbl carb intake from the '67 Corvette kit to fit the small block, but it just wasn't working out like I had hoped. Ended up ordering a 4-bbl intake kit from TDR innovations which should arrive in a couple weeks. In the meantime, I've been fixing where the transmission mounts to the engine to make it a bit more consistent. I've also ordered a can of Corvette Yellow spray paint from an automotive touch up paint site, it's a 12oz can for 20 bucks that is the exact color of the real car (also ordered another can in a different color for another build). Quote Link to comment Share on other sites More sharing options...
Jordan White Posted January 24, 2014 Author Share Posted January 24, 2014 Got the engine filled, sanded, and painted GM Blue. Also created a 3D CAD model of a wheel to fit in the kit tire that I'm going to have 3D printed by Shapeways (well a set of 4 rather). I've adjusted the dimensions slightly and made it so it's one piece rather than two. Quote Link to comment Share on other sites More sharing options...
gray07 Posted January 26, 2014 Share Posted January 26, 2014 i will be watching this, love this body style. Quote Link to comment Share on other sites More sharing options...
hacked Posted January 30, 2014 Share Posted January 30, 2014 nice model, but your right about the motor, what a ''shocker'' Quote Link to comment Share on other sites More sharing options...
Jordan White Posted November 14, 2015 Author Share Posted November 14, 2015 Alright, I've decided to get this project back on the bench! I did eventually receive the intake manifold parts from Shapeways, and had to modify the block and heads for it to fit. I also found out that the valve covers from the Camaro kit are exactly the same ones that are found on the '78 Corvette. Finally, here's the actual wheel fitted into the kit tire. Quote Link to comment Share on other sites More sharing options...
Hawk312 Posted November 14, 2015 Share Posted November 14, 2015 I`ll be watching this thread. I agree with you on the proportions. Alot of weirdness with the kit engine. I was debating back-dating this kit to a `68 or `69 if I ever get time to build again.If you have need during your build, I have an assembled one of these if you want me to snap some pics from different angles. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.