landman Posted February 24, 2019 Author Posted February 24, 2019 (edited) Three high performance engines of different vintages are in the queue for a dyno run. A Chrysler 440 Six-Pak fromthe early 70's, a 1993 Corvette LT1 abd a 2013 Boss 302. Edited November 28, 2020 by landman
landman Posted February 24, 2019 Author Posted February 24, 2019 (edited) The backsplash panel, lamp and cutting oil nozzle have been installed. Edited November 28, 2020 by landman
landman Posted February 27, 2019 Author Posted February 27, 2019 (edited) Working on a display to highlight the Rayfed Ford V8. It will show an engine in the process of being reassembled. i managed to replace the broken clutch fingers. Edited November 28, 2020 by landman
Gramps46 Posted February 27, 2019 Posted February 27, 2019 Impressive craftsmanship. The assortment of tools and detail is amazing.
landman Posted February 27, 2019 Author Posted February 27, 2019 42 minutes ago, Gramps46 said: Impressive craftsmanship. The assortment of tools and detail is amazing. All three common forms of representation are there, PE, Resin castings and 3D prints.
Anglia105E Posted February 27, 2019 Posted February 27, 2019 The table with the four castors and the tools scattered on top...... simply brilliant ! David
landman Posted February 27, 2019 Author Posted February 27, 2019 (edited) On 2/27/2019 at 9:44 AM, Flat32 said: What happened to the crankshaft snout?? In front of the two pulleys or at the other end? It was one piece with the flywheel/clutch assembly, so I may have cut it off. please indicate what you are referring to. Edited November 28, 2020 by landman
Flat32 Posted February 27, 2019 Posted February 27, 2019 The end opposite the flywheel. Included the timing gear and the two crank pulleys.
landman Posted February 27, 2019 Author Posted February 27, 2019 2 hours ago, Flat32 said: The end opposite the flywheel. Included the timing gear and the two crank pulleys. Here? I probably cut that off when I removed it from the supports. what are the dimensions, I'll make another one?
Flat32 Posted February 27, 2019 Posted February 27, 2019 My mistake. The front end is there. What I thought was front is actually the rear and you cut the flywheel off at the rear main. So focused on the carb and clutch I didn't even look at the other end of the crank.
QbanFam Posted February 28, 2019 Posted February 28, 2019 So many details and realism in your work. It’s exceptional.
landman Posted March 15, 2019 Author Posted March 15, 2019 On 2/27/2019 at 9:09 PM, QbanFam said: So many details and realism in your work. It’s exceptional. Thank you Yordan. Glad you like it..
landman Posted March 15, 2019 Author Posted March 15, 2019 (edited) Purchased a Model B engine (Ford 32, 4 cyl.) for a display project. It looks a lot more like a Model A than a model B (Oil tube and no fuel pump). So I began to modify it to represent the B. Edited November 28, 2020 by landman
landman Posted March 17, 2019 Author Posted March 17, 2019 (edited) Early on, it had been decided that there would be some engines on display in the shop. The first trio was the company's namesake, a flathead, a V8 and a flat 12. The boss asked the boys to prepare another one in the same manner, this time a Ford Model B, a Jeep Dauntless V6 and a Porsche 356 Carrera 1500GS. Edited November 28, 2020 by landman
QbanFam Posted March 17, 2019 Posted March 17, 2019 53 minutes ago, landman said: Early on, it had been decided that there would be some engines on display in the shop. The first trio was the company's namesake, a flathead, a V8 and a flat 12. The boss asked the boys to prepare another one in the same manner, this time a Ford Model B, a Jeep Dauntless V6 and a Porsche 356 Carrera 1500GS. Extraordinary work!!! You just inspire me to my next diorama, once I’m finished with my current projects.
landman Posted March 17, 2019 Author Posted March 17, 2019 8 minutes ago, QbanFam said: Extraordinary work!!! You just inspire me to my next diorama, once I’m finished with my current projects. Glad you like it.
Breezy Posted March 22, 2019 Posted March 22, 2019 what a fun read this is and how far you've come. your skills have leveled up like crazy since you started this!! very inspirational.
landman Posted March 22, 2019 Author Posted March 22, 2019 40 minutes ago, Breezy said: what a fun read this is and how far you've come. your skills have leveled up like crazy since you started this!! very inspirational. Glad you enjoyed it Brent. It sort of took a life of its own after a while. i was afraid that once you build this it becomes static and then what next? But it seems to carry on.
landman Posted March 29, 2019 Author Posted March 29, 2019 (edited) FTB has received a Rolls Royce Merlin engine. This is a resin copy of the Airfix Mosquito's with a home made supercharger cast from the Trumpeter Spitfire's. Wrong supercharger for the Mosquito, but the only one I had. Edited November 28, 2020 by landman
landman Posted March 29, 2019 Author Posted March 29, 2019 (edited) When it rains it pours, a second Merlin has come in. This one is in a lot worse shape. The Boss said "Oh boy, Oh boy." Edited November 28, 2020 by landman
Anglia105E Posted March 29, 2019 Posted March 29, 2019 Now there's a classic engine, Pat and just when you think there is no Rolls-Royce Merlin engine..... two come along at once! David
landman Posted March 29, 2019 Author Posted March 29, 2019 (edited) 3 hours ago, Anglia105E said: Now there's a classic engine, Pat and just when you think there is no Rolls-Royce Merlin engine..... two come along at once! David Why is it written Rolls-Royce on them if there aren't any? Just kidding.... Edited March 29, 2019 by landman
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now