IMPALASS89

here are a few more pics

Hi again, I have some free time today to post a few bulids I have finished over the past few week the first is the new Revell 1990 Ford Mustang lx 5.0. I wanted to paint this one like my friend had back around 1992 same color as his outside and inside.I painted the body in scalefinishes color but I can't remember the darn name of the color but it is a factory color from ford for the mustang.The kit went together nice but there was a few things that I ran into. One was at the point were you put the wheels on to the pics with the small cap you are to glue to the back of the rim the attach it to the chassie but if you want to have the car to roll one of the rims were the pin attaches to the rim is it way off set I pulled them off and one of the rims wobbles when you roll it and it rolls like a egg as for the rims you will have to see witch one of the four it is test them first and see the next one I do will have them correct has anyone else have this issue with the Mustang?.Other then this small thing it went together real nice.Well here aer the pics and thanks for looking to.

Very nice nice color also I like the all red color on the car nice to see the gasser by it's side too!!!!

I just seen them here in Michigan in Taylor today. I was told my the manager that the bigger store that have good sales will be carring them. For the s/e model like the 2010 Camaro it was $21.99 each I was glad to see them there again.

nice I like the color what color is the interior going to be??

Nice work and paint what kind of paint did you use? I alos like your rims too!!!!!

Hi again, I finished this bulid on this week and wanted to post pics of it finished I had this one on my mind to bulid over the past mnth or so when I seen a pic of this Torino in these colors I bulit this one in Med blue met with a white interior with a black dash carpet center console and rear deck plate or package shelf. This kit is aways fun to bulid nice engine chassie interior ect. I hope Revell will one day reissue this one soon or take the kit and do a ranchero.Well here are the pics of the Torino finished just need to get the tire decals on the tires Thanks for looking too.

Nice work it is a nice kit to bulid too. I have a few bulit and I still want to bulid a few more there is no end to how you can bulid them!! once again excllent work!!!!!!!!!!!!!!!!!!

well, I finally finished this one today I had no issues with buliding the kit it went together real nice and easy.it is one of the better colors I have painted on this Torino I did ad aluminum exhaust tubes for the exhaust.I just need to add the tire decals I have comming in the mail soon. White letter for the tirs also I went with.I was told that Revell was loking into making this into a ranchero a few years ago about two I think i was told sure wish they would do this it would be nice to have that fro my bulid collection.Wel here are the finished pics and thanks for looking too.ps still working on the camera thing too.

Nice work !!!!! Like the color also I like the tire cover on the back also once again very nice work!!!!!!!!!!!

I want to add plug wires to the engine but I forgot were I put all the distributor I have a bunch somewere in the basement.I'll have to do the next on I work on

what in the world is that !!!!!!! that poor car now I have seen everything!!!!!!!!!!!!

Wow!!!!!!!, Excllent work I really like the two tone paint tis is one of the nicest 62 Impalas I have seen as A bulit model.Did you use barefoil after you cut the rear tail light pannel or did you use alcad chrome? Once excllent work!!!!!!!!!!!!!!

Looks nice so far what chassie did you use? and is the color going to be metallic or a on matillac one or even a candy color like hok they have some nice colors to look at.Once again excllent work

Hi again, Well I had more work done on the Torino today I have the engine finished and installed in the chassie and I have the interior also finished I have three pics of the the work done More to come I might have more to show tonight thanks for looking to.

Hi again, I had sometime to get a few thing done to the Torino over the past few day. I have the body parts all finished and barefoiled the shock towers painted in satin black as for the interior I went with white so I painted the headlinner seats and doorpannels in white.I then painted the engine block heads and intake ford engine blue the trans was painted in aluminum.As for the rims I painted then in saint black and for the center caps I used red for this. The grill was painted in black and then I used a paper towel for cleaning the excess paint off the grill.I also used red for the center of the grill that runs vertical on the grill.I still have to barefoil the window cranks and door handles to.Well here are the pics and more to post in the next day or two thanks for looking to.

Yes stock from the box I might add tire decals not sure what kind white letter or red line or even white????

Well it's day 2 and I have cleared the body parts last night around 2 am.I layed down five coats of clear on the body parts to make sure I had enough on them so I won't cut through anywere here are the pics Please bare with me I'm trying different settings on the camera outside one pic was on a table and the other ones were on the trunk of my car. Thanks for looking more to come.

I know that but the humidty was over 70 % in the basement today and I have a dehumidifer going alos and I always clear my models this gives the body a much deeper finishe look to the body once I set sand them out.

Is this a resin kit?? if so were did you get it looks nice too!!!!!!!!!!!

Hi again, This will be my first w.i.p on the board here so here I go with it. I seen a pic of this Torino on another board and wanted to build it in this color med blue met so I picked up some of mcws paint and started on it the other day and I just finished paint in the body in the color But it went on to dry fro some reason I think the humidty was to high today so I have to color sand the parts then once I get this done I an clear them tonight it all gose well. As for the interior I might go with white ike the one I seen in the pic not sure though. Wel here are the pics of the body painted more to come thanks for looking to.

I hope amt fixes the body on this one fury3 can tell you how much he had to fix the body to make it correct lets hope so.

what is the Macro ? I have no idea what you are talking about. I have a Kodakeasyshare z1275 camera i bought it had a x5 zoom in if this helps.also hd

Yes I know I need to one day figuer how to work the camera I have this one for over three years and still can't get it right some times I can and others I can't but I'll keep trying I'll get it right here soon.

Hi once again, I bulit this one about a month ago the Revell 1969 copo Camaro I painted this one in mcw cortez silver met I primered the body #3600 wet sand tacked cloth the body parts then I painted the body in the cortez silver. I had two nice size hairs in the trunk thanks to the cat that got in the basement so I had to sand the body and reshoot the body all over again. Once the cat was up stairs and the door closed I color sanded the body parts ad then cleared them.As the body parts were drying I painted the interior satin black. I then sanded the body parts ont with a lmg polishing kit to a deep shine once this was finished I barefoiled the window trim. The engine was painted in chevrolet orange engine color.Trans was painted in aluminum as I was buliding the model together I didn't want to use the rear spoiler on this bulid alonf\g with the front one too.It went together nice I just whish Revell would have added the exhaust mainfoilds with the kit along with the headder it comes with. Anyway here are the pics and thanks for looking too.