Jump to content
Model Cars Magazine Forum

MarcelT4

Members
 View Profile  See their activity

  • Posts

    231

  • Joined

  • Last visited

 Content Type 

Everything posted by MarcelT4

  1. MarcelT4
    Hi, I think Revell simplified things a bit. I based my design on pictures I found on the internet. The printed body also has a wider front. In my opinion, it looks more harmonious.
  2. MarcelT4
    Today, there are only printed parts again. None of the parts have been cleaned up or sanded yet. They have simply been removed from their supports. The rear diffuser and hood already fit very well. The front lip will simply be inserted at the front later. Now for some parts from the interior. And here they are put together. And together with the roof. So far, so good, but there is still a lot of work to be done on the computer. I didn't create the 3D model entirely myself, but it has been refined and now needs to be made print-ready. In addition, everything has to be adjusted and created in such a way that it can be put together easily without major reworking. Stay tuned.
  3. MarcelT4
    Good evening, everyone. I'm starting a new build report. At first, I only wanted to modify the Revell kit with a widebody kit. However, since the base doesn't include many details and the body is very simple, I decided to use 3D printing for everything I could. Here are a few pictures of the original Revell kit and my optimized “fake.” I'm curious to see whether the original or the fake will be better received. Currently, the interior, dashboard, and various parts are still being printed.
  4. MarcelT4
    Hello everyone, I'm sharing the link to the print files. Maybe some of you would like to give it a try and build this beautiful model. https://cults3d.com/:3575837
  5. MarcelT4
    Thank you very much for purchasing the files. I think you will also build such a beautiful model and then you too can be the owner of a unique piece.
  6. MarcelT4
    Hello, good evening, it's already over here. The Audi is finished.
  7. MarcelT4
    First time on own wheels.
  8. MarcelT4
    A few pictures today without many words.
  9. MarcelT4
    Hello, I know that KMP produced this model. I took a look at it, but unfortunately there are many errors and inconsistencies in the model. All of my add-on parts and extra parts are my own and printed by me. It has nothing to do with the KMP model. No parts from the kit are used.
  10. MarcelT4
    Today, there are only “little things” to do, but they still need to be done. One part is a little bigger again. And a few impressions.
  11. MarcelT4
    Today, we did some more sponsorship work and put on the remaining decals. The start numbers are also on. I also made the windows. I placed one next to it so you can see it better. I made them from a 0.2 mm PLA sheet from Tamiya. It would be great if there was a printable figure of Walter somewhere, that would be perfect.
  12. MarcelT4
    Today, I finished painting the rear spoiler and laid both parts loosely on the body. But see for yourself. Then there were parts for the interior.
  13. MarcelT4
    Small update today.
  14. MarcelT4
    I have something else for you. The stripes on part of the rear spoiler from above.... ...and below.... ...and in the rear view. Then I started with the side stripes. Masking takes longer than anything else. The second strip is now on too. And then the last strip.
  15. MarcelT4
    Hello everyone, it's been a while. Now I have a little update for you. I removed the windows. It had plastic panes without sliding hatches. Then I painted the stripes. Of course, I made a mistake. The stripes are interrupted on the hood, where the Audi logo will be placed later. But that was fixed and repainted with the base coat. Hopefully, the decal will cover it up later. I'm still looking for a reasonable solution for the stripes on the sides. The widening makes it almost impossible to mask everything off exactly. Here I created and printed a few decals. I hope you'll stick with me?
  16. MarcelT4
    Hello, it went a little further. Unfortunately, I didn't have that much time because I had to work all the time. I put on the front and inserted the radiator grille loosely. Etched parts were also inserted. Then everything was painted. Then I printed the tires. Walter wasn't on slicks at Pikes Peak, he had Michelin Pilot Sport Cup tires. Then it was time for the underbody... ...with brake disk from the etched parts set. Here I put the front spoiler on loosely. Unfortunately not too much, but I didn't manage more in 2 days.
  17. MarcelT4
    Hi, all resin parts were created printable by me and also printed by myself.
  18. MarcelT4
    Hello everyone, I've been doing some rivet counting. Then I tried out the white primer. And then I painted the interior in Alpine White. In comparison with the primer, I find that the Alpine White has a slight yellow tint.
  19. MarcelT4
    Here is a small update. Since the kit steering wheel is wrong, the correct one was created and printed. And tried out how to make the grilles for the rear lights.
  20. MarcelT4
    Hello everyone, I started this project some time ago. I just forgot to share it with you. I will now do so. I'll let the pictures do the talking. I hope I can inspire some of you with this.
  21. MarcelT4
    Hello, here's the final. I'll just let the pictures speak for themselves. It didn't quite turn out the way I wanted it to, but the many warped parts just threw a spanner in the works.
  22. MarcelT4
    After a long time, the work continues. I have completed the marriage of the body, interior and underbody and then fitted the rear diffuser and spoiler holder. The spoiler is still loose at the moment. It was quite a hard job to connect the holder with the underbody and the diffuser.
  23. MarcelT4
    A few pictures today. The driver's door has already been successfully installed. The interior has been tried out and fitted.
  24. MarcelT4
    I have something for you again. I tried to replace the bulky windshield wiper with a 3D printed part. I continued with the mirrors. The belts were also installed. Of course, these are also printed parts. And finally I painted and fitted the lamp lenses.
  25. MarcelT4
    It went on. The dashboard with steering wheel. And a trial run with wheels. I tinted the rear lights. Matches the white paint better. The heart. I hope you like it too.
×
×
  • Create New...